How to get major negative camber?
 

Hello, I have plans to stance out my 370z and am having trouble finding camber arms that allow a lot of camber. Is there any way to get the camber I want? I was looking at Voodoo 13 camber arms front and rear, but they allow for a max of -9 degrees of camber.

This is going to get interesting.

Exactly how much camber are you trying to run, and for what reason? Our cars can fit some pretty ridiculously sized setups so long as you don't mind a decent amount of camber (I'm thinking in the -5 to -6 range), stretched tires and rolling/pulling your fenders.

Something like this?!

Attachment 146845

I am hoping for more of a 12 to 15 degree negative camber setup

https://www.motor1.com/news/29898/ex...wilders-video/

I am neither amused or bewildered. Just sad that you would do this to something other than a Civic.

You're not going to get much help with what you're trying to achieve from the forum. Most of the guys on here are doing performance builds and are running a lot less camber than what you're looking at doing. Honestly, you would probably get more information from Facebook.

Do you know of any really good pages to follow for stancing on Facebook? I have a few that I already follow, but most of them dont have z's.

I get it, I was never really into it, but everyone who owns a 370z doesn't stance with major negative camber. I want to be very unique and in doing so, it is become appearent of the difficulty level for research. It's basically trial and error as of current.

I don't but you might join this group (it has 36k members) and post your question(s) on there

https://www.facebook.com/groups/3940...297/?ref=share

Ok, thank you, I will for sure ask in this group.

Damn! You guys were nice to him. I thought that when I came back. He would be a piece of burnt toast.

Not many here are into stance. The most camber guys run here is around -3. And that's for track use. We got guys here running 315's on a square set-up. I have 345's on the rear.

Agreed. I saw the amount of replies and was getting ready for some free entertainment, scrolled to see your reply up top and then continued and became both disappointed and confused. Maybe the forum is becoming softer?

Most off the shelf arms will only get you -5 or -6 at most. You're going to have to modify or build something to get double digit, maybe even modify or replace the knuckles and lower control arms. I'm kinda curious to see what -11 would look like. I'm at -4 on my autocross car and even normal people can tell it's a lot.

Nah, most of the folks that would burn him down aren't on near as much. However, it does give me one more to add to the iggy list. Why would you want to do something so stupid as to 'stance' a Z? :barf:

It is not safe and it looks goofy as hell. :barf: :barf:

You will probably need more than FUCAS and need lower arms with length adjustment

Like T-demand:
https://www.topendmotorsports.com/ni...able-10579.php

Also send a message to dedpedal on instagram

Yeah, I was afraid I might have to have maybe someone slot camber arms. I would hope I don't run into much trouble with the knuckles, but I will see. The clearances may force me to buy new ones.

Before I posted anything, I was very afraid I would get pounced on by a bunch of people because I new nobody stances out 370z's. I've always been about being unique and this is a major instance of that. I appreciate how people have built them, but the stance world has really grown on me. This is my first vehicle in my name, that I bought and is the vehicle that I happen to have as I change my taste in modifications.

Maybe they’re all waiting till next month when he post a question of why he has so much inside tire wear.

I feel like all I see are stance z34 on ig

You want to check out VooDoo for some suspensions bits. They have upper and lower arms. But they're more into drifting.

I feel like the majority of them are.

Stance is not unique. It is dumb and unsafe. You want to be like a bunch of other idiots and disrespect your vehicle? Go for it - it's yours after all. But don't pretend like your doing something special because you're not :barf:

Well, that took longer than expected.

This happened

The set up that you're wanting will look like absolute dog sh!t. I've been a mechanic for 8 years now and I've seen some stupid **** on cars and some fvcked up shade tree mechanic work, but, good god. This makes my head hurt. This is the guy who shows up to the dealership and has the writer put a line on the Repair Order for "Customer states excessive tire wear after lowering vehicle please advise." Then cries that we tell him that you have to put it back to stock so this doesn't happen. Then we get blown up on yelp for being incompetent and that we scraped his front bumper while at the shop.

He means unique as in doing the exact same dumb chit he's seen 1000 times on fakebook or chitstagram. He is special as in a should wear a helmet kinda special.

His chitbox will be on r/shittycarmods in 6 months if he doesn't wreck it or run out of Biden bucks before then

Sent from my SM-G965U using Tapatalk

I'm hoping this is just a prank.

They just sent him to a very toxic FB group lol. He'll get it from them.

There have been a few on here that wanted to "stance" their Z. They didn't last long on here. After getting nuked. They left.