How to get major negative camber?

OptionZero · 04-15-2021, 10:39 AM

You will probably need more than FUCAS and need lower arms with length adjustment

Like T-demand:
https://www.topendmotorsports.com/ni...able-10579.php

Also send a message to dedpedal on instagram

Tyler_vq37 · 04-15-2021, 09:21 PM

Quote:

Originally Posted by Brendan

Most off the shelf arms will only get you -5 or -6 at most. You're going to have to modify or build something to get double digit, maybe even modify or replace the knuckles and lower control arms. I'm kinda curious to see what -11 would look like. I'm at -4 on my autocross car and even normal people can tell it's a lot.

Yeah, I was afraid I might have to have maybe someone slot camber arms. I would hope I don't run into much trouble with the knuckles, but I will see. The clearances may force me to buy new ones.

Tyler_vq37 · 04-15-2021, 09:29 PM

Quote:

Originally Posted by Rusty

Damn! You guys were nice to him. I thought that when I came back. He would be a piece of burnt toast.

Not many here are into stance. The most camber guys run here is around -3. And that's for track use. We got guys here running 315's on a square set-up. I have 345's on the rear.

Before I posted anything, I was very afraid I would get pounced on by a bunch of people because I new nobody stances out 370z's. I've always been about being unique and this is a major instance of that. I appreciate how people have built them, but the stance world has really grown on me. This is my first vehicle in my name, that I bought and is the vehicle that I happen to have as I change my taste in modifications.

Jhill · 04-15-2021, 11:16 PM

Quote:

Originally Posted by Rusty

Damn! You guys were nice to him. I thought that when I came back. He would be a piece of burnt toast.

Not many here are into stance. The most camber guys run here is around -3. And that's for track use. We got guys here running 315's on a square set-up. I have 345's on the rear.

Maybe they’re all waiting till next month when he post a question of why he has so much inside tire wear.

Brendan · 04-15-2021, 11:22 PM

Quote:

Originally Posted by Tyler_vq37

Before I posted anything, I was very afraid I would get pounced on by a bunch of people because I new nobody stances out 370z's. I've always been about being unique and this is a major instance of that. I appreciate how people have built them, but the stance world has really grown on me. This is my first vehicle in my name, that I bought and is the vehicle that I happen to have as I change my taste in modifications.

I feel like all I see are stance z34 on ig

Rusty · 04-15-2021, 11:54 PM

Quote:

Originally Posted by Tyler_vq37

Before I posted anything, I was very afraid I would get pounced on by a bunch of people because I new nobody stances out 370z's. I've always been about being unique and this is a major instance of that. I appreciate how people have built them, but the stance world has really grown on me. This is my first vehicle in my name, that I bought and is the vehicle that I happen to have as I change my taste in modifications.

You want to check out VooDoo for some suspensions bits. They have upper and lower arms. But they're more into drifting.

NorthStyle · 04-16-2021, 09:53 AM

Quote:

Originally Posted by Brendan

I feel like all I see are stance z34 on ig

I feel like the majority of them are.

JARblue · 04-16-2021, 11:15 AM

Quote:

Originally Posted by Tyler_vq37

I want to be very unique

Stance is not unique. It is dumb and unsafe. You want to be like a bunch of other idiots and disrespect your vehicle? Go for it - it's yours after all. But don't pretend like your doing something special because you're not

geeteezee · 04-16-2021, 03:29 PM

Well, that took longer than expected.

Ventruck · 04-17-2021, 05:44 PM

This happened

Dreadnaught · 04-17-2021, 07:40 PM

The set up that you're wanting will look like absolute dog sh!t. I've been a mechanic for 8 years now and I've seen some stupid **** on cars and some fvcked up shade tree mechanic work, but, good god. This makes my head hurt. This is the guy who shows up to the dealership and has the writer put a line on the Repair Order for "Customer states excessive tire wear after lowering vehicle please advise." Then cries that we tell him that you have to put it back to stock so this doesn't happen. Then we get blown up on yelp for being incompetent and that we scraped his front bumper while at the shop.

-ZS-Carpenter · 04-17-2021, 08:41 PM

Quote:

Originally Posted by JARblue

Stance is not unique. It is dumb and unsafe. You want to be like a bunch of other idiots and disrespect your vehicle? Go for it - it's yours after all. But don't pretend like your doing something special because you're not

He means unique as in doing the exact same dumb chit he's seen 1000 times on fakebook or chitstagram. He is special as in a should wear a helmet kinda special.

His chitbox will be on r/shittycarmods in 6 months if he doesn't wreck it or run out of Biden bucks before then

Sent from my SM-G965U using Tapatalk

Dreadnaught · 04-17-2021, 08:55 PM

I'm hoping this is just a prank.

dts3 · 04-17-2021, 10:39 PM

Quote:

Originally Posted by Rusty

Damn! You guys were nice to him. I thought that when I came back. He would be a piece of burnt toast.

Not many here are into stance. The most camber guys run here is around -3. And that's for track use. We got guys here running 315's on a square set-up. I have 345's on the rear.

They just sent him to a very toxic FB group lol. He'll get it from them.

Rusty · 04-17-2021, 11:44 PM

Quote:

Originally Posted by Dreadnaught

I'm hoping this is just a prank.

There have been a few on here that wanted to "stance" their Z. They didn't last long on here. After getting nuked. They left.

04-15-2021, 10:39 AM	#16 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,226 Drives: 15 370Z Nismo 6MT Rep Power: 214100	You will probably need more than FUCAS and need lower arms with length adjustment Like T-demand: https://www.topendmotorsports.com/ni...able-10579.php Also send a message to dedpedal on instagram __________________ OptionZero Build Thread

04-16-2021, 03:29 PM	#24 (permalink)
geeteezee Base Member Join Date: Jun 2019 Location: Ontario Posts: 191 Drives: 19 370z Heritage EAC Rep Power: 3361	Well, that took longer than expected. Optimiser and Brendan like this. __________________

04-17-2021, 07:40 PM	#26 (permalink)
Dreadnaught Track Member Join Date: Dec 2009 Location: Farmington, Utah Posts: 582 Drives: 14 SR 370z 6MT Rep Power: 10139	The set up that you're wanting will look like absolute dog sh!t. I've been a mechanic for 8 years now and I've seen some stupid **** on cars and some fvcked up shade tree mechanic work, but, good god. This makes my head hurt. This is the guy who shows up to the dealership and has the writer put a line on the Repair Order for "Customer states excessive tire wear after lowering vehicle please advise." Then cries that we tell him that you have to put it back to stock so this doesn't happen. Then we get blown up on yelp for being incompetent and that we scraped his front bumper while at the shop. Rusty, Ghostvette, wanker and 2 others like this. __________________ Ford Diesel and Heavy Line Technician at your service.

04-17-2021, 08:55 PM	#28 (permalink)
Dreadnaught Track Member Join Date: Dec 2009 Location: Farmington, Utah Posts: 582 Drives: 14 SR 370z 6MT Rep Power: 10139	I'm hoping this is just a prank. Rusty likes this. __________________ Ford Diesel and Heavy Line Technician at your service.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any harm running negative camber long term ?	dkinghl	Nissan 370Z General Discussions	13	09-21-2016 10:06 PM
Negative Camber	Lukcas61	Brakes & Suspension	12	07-05-2015 01:52 PM
Decreasing Negative Camber?	tylerk	Brakes & Suspension	11	12-22-2012 03:24 PM
stock suspension negative rear camber?	JAYNO20	Brakes & Suspension	14	05-15-2012 10:31 PM
TopSecret Lip l Slammed l 5" lips l Negative Camber	SOLISIMO	The Lounge (Off Topic)	14	07-09-2009 02:06 PM

04-17-2021, 05:44 PM	#25 (permalink)
Ventruck Track Member Join Date: Jun 2016 Location: California Posts: 785 Drives: '13 Sport+Touring M6 Rep Power: 22898	This happened