How to get major negative camber?

Tyler_vq37

Hello, I have plans to stance out my 370z and am having trouble finding camber arms that allow a lot of camber. Is there any way to get the camber I want? I was looking at Voodoo 13 camber arms front and rear, but they allow for a max of -9 degrees of camber.

Rusty

This is going to get interesting.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

NorthStyle

Exactly how much camber are you trying to run, and for what reason? Our cars can fit some pretty ridiculously sized setups so long as you don't mind a decent amount of camber (I'm thinking in the -5 to -6 range), stretched tires and rolling/pulling your fenders.

zeeder

Something like this?!

camber.jpg

__________________
Zack
FI catback, HFC, and Start Button - Z1 Intake - Nismo S-Tune Spoiler - PasswordJDM V2 Shift Knob

Tyler_vq37

I am hoping for more of a 12 to 15 degree negative camber setup

wanker

https://www.motor1.com/news/29898/ex...wilders-video/

I am neither amused or bewildered. Just sad that you would do this to something other than a Civic.

redondoaveb

You're not going to get much help with what you're trying to achieve from the forum. Most of the guys on here are doing performance builds and are running a lot less camber than what you're looking at doing. Honestly, you would probably get more information from Facebook.

__________________
Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo
700+whp

Tyler_vq37

Do you know of any really good pages to follow for stancing on Facebook? I have a few that I already follow, but most of them dont have z's.

Tyler_vq37

I get it, I was never really into it, but everyone who owns a 370z doesn't stance with major negative camber. I want to be very unique and in doing so, it is become appearent of the difficulty level for research. It's basically trial and error as of current.

redondoaveb

I don't but you might join this group (it has 36k members) and post your question(s) on there

https://www.facebook.com/groups/3940...297/?ref=share

__________________
Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo
700+whp

Tyler_vq37

Ok, thank you, I will for sure ask in this group.

Rusty

Damn! You guys were nice to him. I thought that when I came back. He would be a piece of burnt toast.

Not many here are into stance. The most camber guys run here is around -3. And that's for track use. We got guys here running 315's on a square set-up. I have 345's on the rear.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

DaveZ03

Agreed. I saw the amount of replies and was getting ready for some free entertainment, scrolled to see your reply up top and then continued and became both disappointed and confused. Maybe the forum is becoming softer?

Brendan

Most off the shelf arms will only get you -5 or -6 at most. You're going to have to modify or build something to get double digit, maybe even modify or replace the knuckles and lower control arms. I'm kinda curious to see what -11 would look like. I'm at -4 on my autocross car and even normal people can tell it's a lot.

Ghostvette

Nah, most of the folks that would burn him down aren't on near as much. However, it does give me one more to add to the iggy list. Why would you want to do something so stupid as to 'stance' a Z?

It is not safe and it looks goofy as hell.

__________________
2015 Magma Red 6MT Sport Tech/2012 Fairlady MB 6MT Base (RIP 08032018)https://www.nicoclub.com/FSM/370Z/Coupe/