problem with floatin rotors and akebono

taz46 · 03-26-2021, 10:55 AM

Hello, i tried to install a two piece rotors for the akebonos, but i have a damn problem with them,. the center cap hits the caliper and i can't even bolt 1 bolt of 2... i think it hits by 10mm from the lower section of the caliper.

What do you think? any solution to this? what if i shave 10mm the lower side of caliper? so i can clear the space?

as you can see, i marked with a white line where the center cap would end in the oem rotor, and some pictures more about the issue

Spooler · 03-26-2021, 11:14 AM

What rotors did you buy? Never seen those before. You will need to get with the folks you bought them from.

JARblue · 03-26-2021, 11:16 AM

Get this https://racingbrake.com/nis-irk-02

taz46 · 03-26-2021, 11:30 AM

Quote:

Originally Posted by Spooler

What rotors did you buy? Never seen those before. You will need to get with the folks you bought them from.

they are 2 piece full floating rotors, like the z1 but full floating.

disc hits where the black line, and i'm thinking a solution would be to shave where the yellow mark

taz46 · 03-26-2021, 11:31 AM

Quote:

Originally Posted by JARblue

Get this https://racingbrake.com/nis-irk-02

i'm from europe, buying a disc of X type from overseas will mean +400$ of shipping

Spooler · 03-26-2021, 11:33 AM

I would go back to your old rotors. I would not be grinding on your brake caliper. The rotors you have do not fit properly.

Spooler · 03-26-2021, 11:34 AM

Quote:

Originally Posted by taz46

they are 2 piece full floating rotors, like the z1 but full floating.

disc hits where the black line, and i'm thinking a solution would be to shave where the yellow mark

The Z1 rotors fit properly. I have all 4 corners done.

cv129 · 03-26-2021, 11:35 AM

U sure those aren’t R35 rotors?

They look like 2 pc with J-hook slots from Stillen/AP

cv129 · 03-26-2021, 11:51 AM

The rotor disc appears to be the right diameter, but the hat seems to wrong sized or design....almost feels like it’s a R35 hat mating to an 355mm AP rotors....

taz46 · 03-26-2021, 12:07 PM

Quote:

Originally Posted by cv129

The rotor disc appears to be the right diameter, but the hat seems to wrong sized or design....almost feels like it’s a R35 hat mating to an 355mm AP rotors....

Yes they are from AP the rotors all the dimenions are Ok, except the center cap that that hits the caliper(the oem disc doesn't go that far as there's no center cap), the factory already checked it with all the mesures and they ended saying it's wrong, and the only way to fit the rotors are machining the caliper or changing the caliper.
They checked it and the hub can't be smaller so there's no fix at it.
So i guess i will need to return the discs.

cv129 · 03-26-2021, 12:17 PM

Yes return it.

Is DBA not available to you without the hefty shipping cost associated with US based brands?

taz46 · 03-26-2021, 12:33 PM

Quote:

Originally Posted by cv129

Yes return it.

Is DBA not available to you without the hefty shipping cost associated with US based brands?

thank you for the replies,

yes dba is available , the conversion EUR to USD is something like 840$. to me it's a bit expensive for a fixed rotors, but i think it's the only option right now for two piece rotors.

It's a shame here in europe the z is a non existent car

in my country there's only less than 3k Z's sold from 2009-2020

JARblue · 03-26-2021, 01:12 PM

Quote:

Originally Posted by taz46

It's a shame here in europe the z is a non existent car

in my country there's only less than 3k Z's sold from 2009-2020

Where is that? I was trying to guess the AND abbreviation. Amsterdam, Netherlands? Andorra?

cv129 · 03-26-2021, 01:18 PM

Quote:

Originally Posted by JARblue

Where is that? I was trying to guess the AND abbreviation. Amsterdam, Netherlands? Andorra?

Lol same here I’ve been trying to guess his location, wrecking my brain here.

taz46 · 03-26-2021, 01:49 PM

Quote:

Originally Posted by cv129

Lol same here I’ve been trying to guess his location, wrecking my brain here.

Quote:

Originally Posted by JARblue

Where is that? I was trying to guess the AND abbreviation. Amsterdam, Netherlands? Andorra?

i live in Spain, AND is the abbreviation for Andorra a small country next to Spain.

cheers.

03-26-2021, 11:14 AM	#2 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,797 Drives: 2013 Nismo 370z Rep Power: 2684392	What rotors did you buy? Never seen those before. You will need to get with the folks you bought them from. JARblue likes this.

03-26-2021, 11:16 AM	#3 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Get this https://racingbrake.com/nis-irk-02 Rusty likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

03-26-2021, 11:33 AM	#6 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,797 Drives: 2013 Nismo 370z Rep Power: 2684392	I would go back to your old rotors. I would not be grinding on your brake caliper. The rotors you have do not fit properly. JARblue, cv129, Rusty and 3 others like this.

03-26-2021, 11:35 AM	#8 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,222 Drives: 09 Nismo, 16 Nismo Rep Power: 163995	U sure those aren’t R35 rotors? They look like 2 pc with J-hook slots from Stillen/AP __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield Last edited by cv129; 03-26-2021 at 11:40 AM.

03-26-2021, 11:51 AM	#9 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,222 Drives: 09 Nismo, 16 Nismo Rep Power: 163995	The rotor disc appears to be the right diameter, but the hat seems to wrong sized or design....almost feels like it’s a R35 hat mating to an 355mm AP rotors.... 2011 Nismo#91, JARblue and Hotrodz like this. __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield

03-26-2021, 12:17 PM	#11 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,222 Drives: 09 Nismo, 16 Nismo Rep Power: 163995	Yes return it. Is DBA not available to you without the hefty shipping cost associated with US based brands? JARblue likes this. __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Akebono Rotors?	Zyonara91	Brakes & Suspension	3	04-03-2021 03:28 PM
Z1 2 Piece Akebono Rotors - Need help	jsutton2	Brakes & Suspension	25	04-02-2017 01:09 PM
[FOR SALE] Z1 2-piece akebono rotors	Tukeeg35	Parts for sale (Private Classifieds)	1	09-15-2016 06:38 PM
[FOR SALE] Dba Rotors for Akebono Brakes	ZtoG37	Parts for sale (Private Classifieds)	5	03-29-2016 06:48 PM
[FOR SALE] 4 stock Akebono rotors	Kojack	Parts for sale (Private Classifieds)	15	12-15-2015 07:16 PM