Sanity check please did I get everything I need for my suspension upgrade?

1/4atatime · 03-23-2021, 06:41 PM

Parts

SPL SPL WRENCH Adjustment Wrench
Part #: SPL WRENCH $53.00
Qty: 1
SPL PRO Eccentric Lockout Kit - Nissan 370Z / Infiniti G35 G37 Q40 Q60
Part #: SPL EL Z34 $79.00
Qty: 1
SPL PRO Titanium Rear Adjustable Camber Control Arms, Billet Version - Nissan 370Z / Infiniti G35 G37 Q40 Q60
Part #: SPL RLL Z34B $359.00
Qty: 1
SPL PRO Titanium Rear Adjustable Traction Rod Arms - Nissan 370Z / Infiniti G35 G37 Q40 Q60
Part #: SPL RTR Z34 $359.00
Qty: 1
SPL PRO Titanium Rear Adjustable Toe Arm Links for True Coilover, Billet Version - Nissan 370Z / Infiniti G35 G37 Q40 Q60
Part #: SPL RTA Z34B $395.00
Qty: 1
SPL PRO Front Adjustable Upper Control Camber Arms - Nissan 370Z / Infiniti G35 G37 Q40 Q50 Q60
Part #: SPL FUA Z34

Hotchkis Sport Adjustable Stabilizer Sway Bar Front Set - Nissan 370Z / Infiniti G35 G37 Q40 Q60 RWD
Part #: 22441F $231.00
Qty: 1

DSG Special Limited Edition Fortune Auto Generation 7 500 Series Coilover - Nissan Z34 370Z
SKUFA500-DSGEDITIONZ34 - True type

SPL FE Z34
SPL Pro Front Sway Bar Endlinks - NIssan 370Z / Infiniti G35 G37 Q40 Q50 Q60 Q70 M37 M56 RWD

Am I missing anything other than money from my bank?

k67p67 · 03-23-2021, 07:59 PM

Looks good.

While you're under there, you should consider replacing your rear diff bushing.

1/4atatime · 03-23-2021, 08:24 PM

Quote:

Originally Posted by k67p67

Looks good.

While you're under there, you should consider replacing your rear diff bushing.

Probably going to hold off on that for now car doesn't have that many miles. And I'll probably end up doing a dif cover and new fluids later this summer so I'll have to drop it then.

Spooler · 03-23-2021, 10:22 PM

Rear Swaybar endlinks only if you are going to run a rear swaybar. If you are going square setup, you may not need it. You will need them if you go with coilovers
and corner balance the car.

1/4atatime · 03-23-2021, 10:30 PM

Quote:

Originally Posted by Spooler

Rear Swaybar endlinks only if you are going to run a rear swaybar. If you are going square setup, you may not need it. You will need them if you go with coilovers
and corner balance the car.

I didn't know that planned on using the stock sway bar for the rear since I heard it's not really worth it to get the upgraded rear one. But I am planning on getting it corner balanced so I'll pick up a pair. For some reason I thought since I wasn't swapping the rear sway bar I could get away with not getting end links. Now I know I appreciate that info Spooler!

redondoaveb · 03-23-2021, 11:09 PM

Quote:

Originally Posted by 1/4atatime

I didn't know that planned on using the stock sway bar for the rear since I heard it's not really worth it to get the upgraded rear one. But I am planning on getting it corner balanced so I'll pick up a pair. For some reason I thought since I wasn't swapping the rear sway bar I could get away with not getting end links. Now I know I appreciate that info Spooler!

I kept my stock rear swaybar and didn't need to upgrade the end links. Front Hotchkis needed them of course

Spooler · 03-23-2021, 11:51 PM

Quote:

Originally Posted by redondoaveb

I kept my stock rear swaybar and didn't need to upgrade the end links. Front Hotchkis needed them of course

If you corner balance the car they are needed to make sure you don't preload the rear suspension. I was watching the scale when my car was corner balanced the first time. The endlinks had to be set properly so to not disturb the corner balance.

Rusty · 03-24-2021, 12:12 AM

Pretty much got everything covered. Since you're going this far. Get the front lower control arm bushings too. The big change is when you do the rear sub-frame bushings.

The rear sway bar is dependent on your rear tire size.

1/4atatime · 03-24-2021, 04:05 AM

Quote:

Originally Posted by Rusty

Pretty much got everything covered. Since you're going this far. Get the front lower control arm bushings too. The big change is when you do the rear sub-frame bushings.

The rear sway bar is dependent on your rear tire size.

I did also order the z1 collars a while back that I'm planning on installing at the same time. Are those as good as just flat out replacement of the sub-frame bushings? Probably going to hold off on the front lower since I've already spent a chunk of cash unless you think it's really needed?

1/4atatime · 03-24-2021, 04:06 AM

Edit: double post

1/4atatime · 03-24-2021, 08:54 AM

Also another question is it going to cause too much wear on my tires if I drive around for like a week before getting an alignment? If it is that's fine I can drive my other car I just wasn't sure since I have heard you want to drive them some so the shocks settled but I wasn't sure show much was too much. I'm planning on doing the install one weekend and then the alignment and corner balancing the next.

Rusty · 03-24-2021, 09:02 AM

Quote:

Originally Posted by 1/4atatime

I did also order the z1 collars a while back that I'm planning on installing at the same time. Are those as good as just flat out replacement of the sub-frame bushings? Probably going to hold off on the front lower since I've already spent a chunk of cash unless you think it's really needed?

The Z1 collars do not replace the bushings. They slide into the void in the bushing. You will still have some movement in the sub-frame after install.

The front lowers. You already did the rear. Why leave the front have done.

Don't drive too far until you get an alignment.

redondoaveb · 03-24-2021, 10:16 AM

Quote:

Originally Posted by Spooler

If you corner balance the car they are needed to make sure you don't preload the rear suspension. I was watching the scale when my car was corner balanced the first time. The endlinks had to be set properly so to not disturb the corner balance.

Mine was corner balanced without the rear end links and this shop specializes in race cars so I assume they knew what they were doing

1/4atatime · 03-24-2021, 10:30 AM

Quote:

Originally Posted by Rusty

The Z1 collars do not replace the bushings. They slide into the void in the bushing. You will still have some movement in the sub-frame after install.

The front lowers. You already did the rear. Why leave the front have done.

Don't drive too far until you get an alignment.

Alright alright you convinced me I'll do the front what's another few hundred at this point am I right

Are the Z1 collars still acceptable? I don't really want to get something else if those will get me most of the way there but at this point my wallet is up in flames and I'm following your lead even if it's off a cliff at this point

1/4atatime · 03-24-2021, 10:32 AM

Quote:

Originally Posted by Rusty

Pretty much got everything covered. Since you're going this far. Get the front lower control arm bushings too. The big change is when you do the rear sub-frame bushings.

The rear sway bar is dependent on your rear tire size.

Is this the part I need? https://conceptzperformance.com/spl-...34_p_63686.php

03-23-2021, 06:41 PM	#1 (permalink)
1/4atatime Base Member Join Date: Sep 2019 Location: VA Posts: 179 Drives: Silver 2018 370z Rep Power: 6716	Sanity check please did I get everything I need for my suspension upgrade? Parts SPL SPL WRENCH Adjustment Wrench Part #: SPL WRENCH $53.00 Qty: 1 SPL PRO Eccentric Lockout Kit - Nissan 370Z / Infiniti G35 G37 Q40 Q60 Part #: SPL EL Z34 $79.00 Qty: 1 SPL PRO Titanium Rear Adjustable Camber Control Arms, Billet Version - Nissan 370Z / Infiniti G35 G37 Q40 Q60 Part #: SPL RLL Z34B $359.00 Qty: 1 SPL PRO Titanium Rear Adjustable Traction Rod Arms - Nissan 370Z / Infiniti G35 G37 Q40 Q60 Part #: SPL RTR Z34 $359.00 Qty: 1 SPL PRO Titanium Rear Adjustable Toe Arm Links for True Coilover, Billet Version - Nissan 370Z / Infiniti G35 G37 Q40 Q60 Part #: SPL RTA Z34B $395.00 Qty: 1 SPL PRO Front Adjustable Upper Control Camber Arms - Nissan 370Z / Infiniti G35 G37 Q40 Q50 Q60 Part #: SPL FUA Z34 Hotchkis Sport Adjustable Stabilizer Sway Bar Front Set - Nissan 370Z / Infiniti G35 G37 Q40 Q60 RWD Part #: 22441F $231.00 Qty: 1 DSG Special Limited Edition Fortune Auto Generation 7 500 Series Coilover - Nissan Z34 370Z SKUFA500-DSGEDITIONZ34 - True type SPL FE Z34 SPL Pro Front Sway Bar Endlinks - NIssan 370Z / Infiniti G35 G37 Q40 Q50 Q60 Q70 M37 M56 RWD Am I missing anything other than money from my bank? JARblue likes this. __________________ Did any of my post help you or just feeling nice?Give Rep\|Add me to your friends list\|View My Build "The real you is who you are when ain't nobody watchin" - NF Last edited by 1/4atatime; 03-23-2021 at 07:40 PM.

03-23-2021, 07:59 PM	#2 (permalink)
k67p67 Enthusiast Member Join Date: Oct 2016 Location: Rancho Cucamonga, CA Posts: 304 Drives: 2017 Nismo Tech 6MT Rep Power: 3937	Looks good. While you're under there, you should consider replacing your rear diff bushing. 1/4atatime likes this. __________________ 2017 370Z Nismo Tech 6MT PART OUT IN PROGRESS Work \| Motordyne \| Powertrix \| Swift \| Michelin \| Takeda \| Hotchkis \| RJM \| Voodoo13 \| SPL \| SPC \| Z1 Motorsports \| ZSpeed \| Morimoto \| Craft Square

03-23-2021, 10:22 PM	#4 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Rear Swaybar endlinks only if you are going to run a rear swaybar. If you are going square setup, you may not need it. You will need them if you go with coilovers and corner balance the car. JARblue and 1/4atatime like this.

03-24-2021, 12:12 AM	#8 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,219 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Pretty much got everything covered. Since you're going this far. Get the front lower control arm bushings too. The big change is when you do the rear sub-frame bushings. The rear sway bar is dependent on your rear tire size. JARblue, Hotrodz and 1/4atatime like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

03-24-2021, 04:06 AM	#10 (permalink)
1/4atatime Base Member Join Date: Sep 2019 Location: VA Posts: 179 Drives: Silver 2018 370z Rep Power: 6716	Edit: double post __________________ Did any of my post help you or just feeling nice?Give Rep\|Add me to your friends list\|View My Build "The real you is who you are when ain't nobody watchin" - NF

03-24-2021, 08:54 AM	#11 (permalink)
1/4atatime Base Member Join Date: Sep 2019 Location: VA Posts: 179 Drives: Silver 2018 370z Rep Power: 6716	Also another question is it going to cause too much wear on my tires if I drive around for like a week before getting an alignment? If it is that's fine I can drive my other car I just wasn't sure since I have heard you want to drive them some so the shocks settled but I wasn't sure show much was too much. I'm planning on doing the install one weekend and then the alignment and corner balancing the next. __________________ Did any of my post help you or just feeling nice?Give Rep\|Add me to your friends list\|View My Build "The real you is who you are when ain't nobody watchin" - NF

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Suspension Upgrade for DD	chopin_guy88	Brakes & Suspension	43	02-27-2016 02:12 PM
Seat Sanity Check	osbornsm	Nissan 370Z General Discussions	57	11-19-2014 09:18 AM
HPDE Time and I need someone to check my sanity...	osbornsm	Nissan 370Z General Discussions	4	05-16-2012 08:49 PM
[FOR SALE] Nismo Suspension Upgrade	Daishi	Parts for sale (Private Classifieds)	15	09-15-2011 07:03 PM
Reluctant to upgrade suspension	spearfish25	Brakes & Suspension	26	12-24-2009 09:16 AM