DBA Rotors

2string1

Does anyone have an opinion on these rotors?
https://conceptzperformance.com/dba-...-kt_p_9488.php

wanker

An opinion? Sure... They look nice and are very expensive unless you live down under.

For that kind of money, I'd go with two-piece rotors.

2string1

What are the benefits of a 2 piece rotor for street use? No racing.

BGTV8

I've used these for 10 years of daily driving and regular track usage and never had a problem

2string1

Are you talking about the ones I posted or the DBA 2 piece ones?

Optimiser

I've had them on for some years now including track days and no problems.

cv129

Fine product. Personally though...

Your link specifically refer to the rear rotors. For the rears, and being 1 pc, I don't see any reason to pay this amount.

Heat paint marking is a nice touch, but again, the rears aren't the concern as far as heat dissipation. All else equal, rotor by itself isn't going to provide higher friction. Weight wise, these provide no or negligible (if any) reduction in weight over any other 1 pc rear rotors. So functionally, there isn't any advantage for most.

Asthetically, if distinct slot patterns is of your interest, maybe check out the below?

https://stillen.com/collections/brak...-sku-inf3501cs

__________________
Setrab | RE-71 | SPL | JRZ | Nismo | ARK | Whiteline | RacingBrake | CJM Oil Pan | Ti shield

madwi

I am currently running them and they work well for me.

Jhill

I think I’m with cv129. I can’t see why you’d spend that much on single piece rears. Save a little more and get 2 piece or just do his link.

BGTV8

The ones you have I have on the rear an I use my own rotor hats and a similar size 5000 rotor off the Ford Australia Falcon GT .. also fits a Jag XK-R from memory.

Careful inspection of the catalogue often throws up equivalents

2011 Nismo#91

Opinion, waste of money.

__________________
GTR TT 493Whp/431lbft, Ecutek, Southbend 6puck,Quaife, RPM RollBar 4Point, R888R, JRZ RSPro F(10R/10C) R(10R/6C) 1000f500r inlbs+150inlbs Tender, SPL everywhere.Full Specs

2string1

Please explain why. What do you use?

wanker

These rotors are quite expensive for what you get. There are equivalent alternatives for half the price.

If you want to spend the money, 2 piece rotors have the benefit of being much lighter and reducing the rotational wheel of the wheel, thereby, improving acceleration.

JARblue

Because you can buy a set of rear rotors that will completely fulfill your braking needs for less than $150.

Please explain why you need every single decision validated by randos on the interwebs


A rotor is a basic piece of metal. Some are heavier and dissipate heat better. Some are lighter and do not dissipate heat as well. For performance purposes, people have to compromise between those two factors.

For everyone else, IT DOES NOT MATTER.
Clearly, you have no need for those rotors. So you don't need to spend that much. If you want to spend the money, go for it. But don't expect to be congratulated on your decision.

__________________

cv129

I literally explained to him in terms of weight, heat, and friction. And he’s still asking why...

__________________
Setrab | RE-71 | SPL | JRZ | Nismo | ARK | Whiteline | RacingBrake | CJM Oil Pan | Ti shield