Noise coming from Endlinks

k67p67 · 02-21-2021, 05:28 PM

The conical aluminum spacers belong on the sway bar end of the endlink.

From SPL site:

ZoomZ · 02-21-2021, 05:50 PM

Quote:

Originally Posted by k67p67

The conical aluminum spacers belong on the sway bar end of the endlink.

From SPL site:

Interesting. 2018 SPL install seems to contradict itself in steps 3 and 4. Looking at your image, seems that the angle at the control arm end is not Perpendicular, and is in fact putting an unwanted twist to rod-end. Would make sense to put spacer there to alleviate that. According to image.

IMG_2084 (1).JPG

k67p67 · 02-22-2021, 05:14 PM

Hard to say without seeing the end of that sway bar. There may be some preload causing the endlink to rotate off center.

Quicksilvers · 02-23-2021, 09:16 AM

Quote:

Originally Posted by Rusty

Get them to wrap the teflon thread tape around the swaybar.

If you are adding grease to your sway bar make sure if is synthetic grease and not regular grease. I too had a noise coming from my front sway bar and since grease would not work I applied the teflon threaded tape and it can work and take the unwanted noise away if done right.

Quicksilvers · 02-23-2021, 09:19 AM

Use a synthetic grease like this.

02-21-2021, 05:28 PM	#16 (permalink)
k67p67 Enthusiast Member Join Date: Oct 2016 Location: Rancho Cucamonga, CA Posts: 303 Drives: 2017 Nismo Tech 6MT Rep Power: 3937	The conical aluminum spacers belong on the sway bar end of the endlink. From SPL site: ZoomZ likes this. __________________ 2017 370Z Nismo Tech 6MT PART OUT IN PROGRESS Work \| Motordyne \| Powertrix \| Swift \| Michelin \| Takeda \| Hotchkis \| RJM \| Voodoo13 \| SPL \| SPC \| Z1 Motorsports \| ZSpeed \| Morimoto \| Craft Square

02-22-2021, 05:14 PM	#18 (permalink)
k67p67 Enthusiast Member Join Date: Oct 2016 Location: Rancho Cucamonga, CA Posts: 303 Drives: 2017 Nismo Tech 6MT Rep Power: 3937	Hard to say without seeing the end of that sway bar. There may be some preload causing the endlink to rotate off center. __________________ 2017 370Z Nismo Tech 6MT PART OUT IN PROGRESS Work \| Motordyne \| Powertrix \| Swift \| Michelin \| Takeda \| Hotchkis \| RJM \| Voodoo13 \| SPL \| SPC \| Z1 Motorsports \| ZSpeed \| Morimoto \| Craft Square

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
noise when coming to a stop	Limeybastard	Engine & Drivetrain	8	10-29-2014 06:13 PM
Noise coming from exhaust pipes?	zefaulter	Intake/Exhaust	10	09-19-2014 12:23 AM
Noise coming from Transmission and rear	limited733	Engine & Drivetrain	1	03-04-2014 11:53 AM
High pitched noise coming from speakers	invader19	Audio & Video	11	11-12-2012 06:24 PM
Rattle noise coming from real after ark CBE and NOn T/P installed!!	370zjames	Intake/Exhaust	5	08-31-2011 11:24 PM