Hey i got my car aligned a few months ago, relatively weak toe and caster with 5* negative camber. I am now two sets of front tires down with wear
|
|
LinkBack | Thread Tools | Display Modes |
06-20-2020, 02:45 AM | #1 (permalink) |
Base Member
Join Date: May 2018
Location: Quebec, Canada
Posts: 22
Drives: 2019 370Z M6 Sport
Rep Power: 7 |
Excessive front tire wear
Hey
i got my car aligned a few months ago, relatively weak toe and caster with 5* negative camber. I am now two sets of front tires down with wear on the inside side wall, which ive never seen on "high" camber alignements. I dot quite a lot of drift, i was wondering if front tire wear like this is common due to a weird geometry thing our cars could have under load?
__________________
IG @trigger.tm Last edited by Triggy; 06-20-2020 at 02:49 AM. |
06-20-2020, 01:22 PM | #2 (permalink) |
Ronin Samurai - Assassin
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 35,219
Drives: 2011 Nismo GM 6M
Rep Power: 2684438 |
If you are running camber at -5. YES you will have tire wear on the inside. The outside edge isn't even on the ground. If your toe is off. It will wear even faster. Most don't go past -3 on camber. Do you have adjustable upper control arms?
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
06-20-2020, 01:29 PM | #3 (permalink) |
A True Z Fanatic
Join Date: Mar 2011
Location: Austin, TX
Age: 43
Posts: 36,450
Drives: 11 Z34, 98 E36 M3
Rep Power: 2684440 |
lol -5 degrees camber and you're complaining about tire wear? with that shět
__________________
2011 370Z 6MT Sport Gun Metallic | ARC | CJM | Ecutek | FI | Fujimura | R2C | SPL | Stillen | TWM | Z1 | ZSpeed | |
06-20-2020, 02:05 PM | #4 (permalink) |
A True Z Fanatic
Join Date: Apr 2011
Location: Sacramento
Posts: 3,235
Drives: 15 370Z Nismo 6MT
Rep Power: 214100 |
not only that, but he's driving the car at drift events
so high camber + hard driving . . . why surprise at uneven and high wear?
__________________
OptionZero Build Thread |
06-20-2020, 11:48 PM | #5 (permalink) |
Track Member
Join Date: Apr 2015
Location: Columbus OH
Posts: 612
Drives: Z34|C4LT4|C6Z06|V25
Rep Power: 3366 |
Damn, -5° camber. I run only -3° on my Z06 when running soft compound slicks. Caster is, however, set at +8°. Is there a reason why initial camber was that low? I'd rather run a higher number (probably around -2°) for camber and much higher positive caster (over +7°).
|
06-21-2020, 12:22 AM | #6 (permalink) | |
A True Z Fanatic
Join Date: Apr 2011
Location: Sacramento
Posts: 3,235
Drives: 15 370Z Nismo 6MT
Rep Power: 214100 |
for wheel fitment
found this pic of his car from another thread: Quote:
__________________
OptionZero Build Thread |
|
06-21-2020, 01:58 AM | #7 (permalink) | |
Base Member
Join Date: May 2018
Location: Quebec, Canada
Posts: 22
Drives: 2019 370Z M6 Sport
Rep Power: 7 |
Quote:
Here are my specs: Camber 5* Caster 3.5* Toe 10 in
__________________
IG @trigger.tm |
|
06-21-2020, 03:16 AM | #8 (permalink) | |
A True Z Fanatic
Join Date: Dec 2009
Location: 03350 Australia
Posts: 1,514
Drives: 09 Nissan 370Z M6
Rep Power: 39974 |
Quote:
The toe setting also looks dodgy. 10 "what" in ..... 10 degrees, 0.10 inch, 10mm ........... is that total toe-in or each side. |
|
06-21-2020, 11:16 AM | #10 (permalink) |
A True Z Fanatic
Join Date: Apr 2011
Location: Sacramento
Posts: 3,235
Drives: 15 370Z Nismo 6MT
Rep Power: 214100 |
Are you saying 10 DEGREES?
I think we found the problem Look in the drivers seat
__________________
OptionZero Build Thread |
06-21-2020, 01:33 PM | #12 (permalink) |
Ronin Samurai - Assassin
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 35,219
Drives: 2011 Nismo GM 6M
Rep Power: 2684438 |
He is his own worst enemy.
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
06-21-2020, 01:36 PM | #13 (permalink) |
Ronin Samurai - Assassin
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 35,219
Drives: 2011 Nismo GM 6M
Rep Power: 2684438 |
With your spec's. 1000 miles IS normal.
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
06-22-2020, 01:46 PM | #15 (permalink) |
A True Z Fanatic
Join Date: Apr 2011
Location: Sacramento
Posts: 3,235
Drives: 15 370Z Nismo 6MT
Rep Power: 214100 |
dont get mad at us
you want us to give you a diagnosis that DOESN'T acknowledge the obvious problem? go to a proper alignment shop that deals with race cars, including drift cars, and see if they spot anything beyond the glaring issues of your camber and insane toe specs you also didn't give us your tire compound, which is also a factor tire wear is always gonna come down to: - camber - toe - compound - driver everything you gave us is that your camber is high, your toe is NUTS, and your driving is hard. wtf u expect us to say? we aren't looking under your car, we aren't gonna point out a magical gremlin thats eating your tires at night
__________________
OptionZero Build Thread |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Excessive inner rear tire wear | NHare10 | Wheels & Tires | 5 | 06-17-2019 10:35 PM |
Uneven tire tread wear LR tire? | AstatenateZ | Brakes & Suspension | 36 | 11-08-2017 10:52 AM |
Tire wear | RiCharlie | Wheels & Tires | 8 | 10-31-2012 01:01 AM |
Excessive water from RH side front | scottIN | Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs | 2 | 10-05-2012 10:18 AM |
Excessive Rear Tire Wear | joshwilly | Wheels & Tires | 2 | 10-18-2011 02:08 AM |