Dragging/rubbing noise, help!!!

somedude · 06-10-2020, 09:14 PM

Hey fellows, I own a 16 Nismo V2. A couple of weeks ago I pulled my handbrake hard doing about 3mph. The car stops, but I hear a clunk. Like something shifted. Immediately after that, I am getting a "rubbing" or some contact noise coming from the rear. I put the car on a lift, nothing looks abnormal. Took the rotors off. Nothing looks abnormal. Put OEM rotors back on. Same noise. Maybe a tad louder. Change pads. Same ****. Calipers are properly torqued to the knuckle. All my SPL components look fine. I haven't adjusted the rear shoes since the hand brake DOES work. I take it to Nissan. Their "master Tech" is a moron and tells me my aftermarket rotor is warped and that's the cause. ********. I change it just for ***** and giggles. Of course that's not he cause. Nissan charges me 76$ for their time. I move the Hub with the wheels off. Good rotation. No noise. The spindle nut and cotter pins are intact. The car seems to shift fine. The clutch seems to be grabbing fine. I have no idea what I have done. I have looked at the e brake cables. Seem fine. I have no idea what to do. Is there a chance the whole e brake assembly has shifted and now is rubbing the rotor? Could the clutch be making this noise due to the sudden back and forth created by the e brake pull? I am lost. I'm worried I'll take it to Nissan again and they'll tell me some ******** and it wont be the case. Anyone have anything similar happened to them? Please help.

cv129 · 06-10-2020, 10:31 PM

Maybe shoot a video?

Does it sound like rubber on rubber/plastic...metal on metal...rubber on metal...?

somedude · 06-10-2020, 10:40 PM

Doesnt sound like plastic. I'm not sure if there is any plastic around the hand brake assy or rear axle? Not a grinding noise either.

somedude · 06-10-2020, 10:52 PM

I'm going g to try to shoot a video but I'm not sure the noise will come through with all the other noises? Tire noise, exhaust, etc ...

Rusty · 06-10-2020, 11:15 PM

So the noise started after you pulled the handbrake. At low speed with the windows down. Drive forward and then back up to see if the noise does it in both directions. Helps if you have someone standing near the rear when you do this.

You had the rear rotors off. Are the e-brake shoes still intact?

somedude · 06-10-2020, 11:19 PM

@Rusty yes. I believe so. The noise does not start until I'm doing about 30nph or higher. The car is not my daily. It only has 26000 miles on it. Everything looks very clean inside the rotor.

somedude · 06-10-2020, 11:22 PM

The shoe assy looks very clean as well. Is here a chance the whole assy has shifted? Is it even a brake issue really. It has to be though.

Rusty · 06-10-2020, 11:37 PM

The noise is in the rear?

somedude · 06-11-2020, 01:26 AM

@Rusty yes sir. It is coming from somewhere around the back I believe. When I drive, it seems to be behind my seat. Noise can travel a bit but it seems to be coming from the back.

06-10-2020, 09:14 PM	#1 (permalink)
somedude Base Member Join Date: Sep 2016 Location: WA Posts: 16 Drives: 16 370z Nismo Tech M Rep Power: 9	Dragging/rubbing noise, help!!! Hey fellows, I own a 16 Nismo V2. A couple of weeks ago I pulled my handbrake hard doing about 3mph. The car stops, but I hear a clunk. Like something shifted. Immediately after that, I am getting a "rubbing" or some contact noise coming from the rear. I put the car on a lift, nothing looks abnormal. Took the rotors off. Nothing looks abnormal. Put OEM rotors back on. Same noise. Maybe a tad louder. Change pads. Same **. Calipers are properly torqued to the knuckle. All my SPL components look fine. I haven't adjusted the rear shoes since the hand brake DOES work. I take it to Nissan. Their "master Tech" is a moron and tells me my aftermarket rotor is warped and that's the cause. ****. I change it just for * and giggles. Of course that's not he cause. Nissan charges me 76$ for their time. I move the Hub with the wheels off. Good rotation. No noise. The spindle nut and cotter pins are intact. The car seems to shift fine. The clutch seems to be grabbing fine. I have no idea what I have done. I have looked at the e brake cables. Seem fine. I have no idea what to do. Is there a chance the whole e brake assembly has shifted and now is rubbing the rotor? Could the clutch be making this noise due to the sudden back and forth created by the e brake pull? I am lost. I'm worried I'll take it to Nissan again and they'll tell me some ****** and it wont be the case. Anyone have anything similar happened to them? Please help.

06-10-2020, 10:31 PM	#2 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,236 Drives: 09 Nismo, 16 Nismo Rep Power: 163995	Maybe shoot a video? Does it sound like rubber on rubber/plastic...metal on metal...rubber on metal...? __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield

06-10-2020, 11:15 PM	#5 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,218 Drives: 2011 Nismo GM 6M Rep Power: 2684438	So the noise started after you pulled the handbrake. At low speed with the windows down. Drive forward and then back up to see if the noise does it in both directions. Helps if you have someone standing near the rear when you do this. You had the rear rotors off. Are the e-brake shoes still intact? __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

06-10-2020, 11:37 PM	#8 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,218 Drives: 2011 Nismo GM 6M Rep Power: 2684438	The noise is in the rear? __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
rubbing noise at high speeds	fairlady_z34	Brakes & Suspension	1	03-29-2015 08:42 PM
rear brakes dragging?	chops	Brakes & Suspension	2	03-08-2015 10:55 PM
Sound of metal dragging on concrete.	Limeybastard	Engine & Drivetrain	18	03-04-2015 01:34 PM
Nissan warranty and feet dragging at dealer	mr_sk	Nissan 370Z General Discussions	43	09-12-2011 09:41 PM
Remove spare and trunk junk for dragging?	Nismo221	Track / Autocross / Drifting / Dragstrip	10	05-14-2011 11:31 PM

06-10-2020, 10:40 PM	#3 (permalink)
somedude Base Member Join Date: Sep 2016 Location: WA Posts: 16 Drives: 16 370z Nismo Tech M Rep Power: 9	Doesnt sound like plastic. I'm not sure if there is any plastic around the hand brake assy or rear axle? Not a grinding noise either.

06-10-2020, 10:52 PM	#4 (permalink)
somedude Base Member Join Date: Sep 2016 Location: WA Posts: 16 Drives: 16 370z Nismo Tech M Rep Power: 9	I'm going g to try to shoot a video but I'm not sure the noise will come through with all the other noises? Tire noise, exhaust, etc ...

06-10-2020, 11:19 PM	#6 (permalink)
somedude Base Member Join Date: Sep 2016 Location: WA Posts: 16 Drives: 16 370z Nismo Tech M Rep Power: 9	@Rusty yes. I believe so. The noise does not start until I'm doing about 30nph or higher. The car is not my daily. It only has 26000 miles on it. Everything looks very clean inside the rotor.

06-10-2020, 11:22 PM	#7 (permalink)
somedude Base Member Join Date: Sep 2016 Location: WA Posts: 16 Drives: 16 370z Nismo Tech M Rep Power: 9	The shoe assy looks very clean as well. Is here a chance the whole assy has shifted? Is it even a brake issue really. It has to be though.

06-11-2020, 01:26 AM	#9 (permalink)
somedude Base Member Join Date: Sep 2016 Location: WA Posts: 16 Drives: 16 370z Nismo Tech M Rep Power: 9	@Rusty yes sir. It is coming from somewhere around the back I believe. When I drive, it seems to be behind my seat. Noise can travel a bit but it seems to be coming from the back.