Supporting mods with coilovers

redondoaveb · 05-24-2020, 06:52 PM

Quote:

Originally Posted by GooglyMoogly

Honestly the weight of the rims and price was too hard to pass on. Just gotta start saving money for some good coil overs. Any recommendations? I was thinking kw1 or rs-r.

I've got KW V3's and really like them. Everyone has their own personal preference though.

Also, are you going to do a front sway bar?

GooglyMoogly · 05-24-2020, 06:57 PM

Already got one on the way with SPL endlinks. Got the front hotschik..... 100% spelt it wrong.

redondoaveb · 05-24-2020, 07:00 PM

Quote:

Originally Posted by GooglyMoogly

Already got one on the way with SPL endlinks. Got the front hotschik..... 100% spelt it wrong.

Good choice on both.

OptionZero · 05-24-2020, 07:41 PM

Folks seem satisfied with the kw v3’s build quality and greet comfort but they are not up to snuff for performance oriented driving. Also, limited lowering capability, no top mounts and no pillowballs anywhere

Heard very little of the rs-r but the specs indicate similar limitations

Fortune Auto and PowerTrix are in the same price range and give you pillow balls more adjustment with rebuild ability stateside and customization if you want. I think BC does too.

Hotrodz here tracks his car on fortunes effectively. Jarblue as well

Rusty · 05-24-2020, 07:52 PM

Quote:

Originally Posted by OptionZero

Folks seem satisfied with the kw v3’s build quality and greet comfort but they are not up to snuff for performance oriented driving. Also, limited lowering capability, no top mounts and no pillowballs anywhere

Heard very little of the rs-r but the specs indicate similar limitations

Fortune Auto and PowerTrix are in the same price range and give you pillow balls more adjustment with rebuild ability stateside and customization if you want. I think BC does too.

Hotrodz here tracks his car on fortunes effectively. Jarblue as well

Jar's a parts collector/hoarder.

redondoaveb · 05-24-2020, 08:18 PM

KW V3's are more than capable for spirited street/canyon driving. They also have 2" front and 1.7" rear lowering capabilities. My current car came with BC ER's and they were so bad, I removed them and replaced them with the KW's. Not an expense I wanted at the time but the BC's were complete junk.

cv129 · 05-24-2020, 08:37 PM

V3 is very capable. The only thing I’ve heard is spring rate isn’t high enough to use with full slicks.

I forgot his username...a known track guy, he tracked a motoiq 370z with V3

Rusty · 05-24-2020, 09:23 PM

Quote:

Originally Posted by cv129

V3 is very capable. The only thing I’ve heard is spring rate isn’t high enough to use with full slicks.

I forgot his username...a known track guy, he tracked a motoiq 370z with V3

Clintfocus

GooglyMoogly · 05-24-2020, 10:33 PM

What do you guys think of tein flex z?

Mike_O_Nite · 05-24-2020, 11:13 PM

Quote:

Originally Posted by OptionZero

You can easily fit these (not mine):
SSR Professor SP1 - in custom Satin Black

Thanks for the referral brother! (Can’t believe there has been no interest...guessing people prefer Work Meisters over SSR Professors *)

OptionZero · 05-25-2020, 03:05 AM

I prefer professors over meisters myself

justin_boy · 05-25-2020, 07:16 PM

I run the V3's along with spl front and rear billet arms. going back I wish i wouldve went with fortune 500's cause the KW's squeak like a mofo

if youre going all out with suspension youd be a fool not to run crazy specs in my stupid opinion.

good luck with everything!!

redondoaveb · 05-25-2020, 07:57 PM

Quote:

Originally Posted by justin_boy

I run the V3's along with spl front and rear billet arms. going back I wish i wouldve went with fortune 500's cause the KW's squeak like a mofo

if youre going all out with suspension youd be a fool not to run crazy specs in my stupid opinion.

good luck with everything!!

Are you running a Hotchkis front sway bar? The only squeak I ever had came from the the sway bar and I've had KW's on both my z's.

OptionZero · 05-25-2020, 10:50 PM

I prefer monoball mounts on the coilovers

Jhill · 05-27-2020, 12:56 AM

I went the powertrix route because of Charles support and I’ve been happy with them but like most I don’t have anything to compare them against. The thing that turned me off to the V3’s were they don’t give the coil spring rate and then when I called and got someone to give me the rate they seemed rather soft compared to other options and then also they are progressive rate springs which I’m just not a fan of. I tested them in my buddies m3 (he likes em) and I know it is not apples to apples at all but it still had that unsure lean over in turns that I feel is largely due to the progressive spring since every car I’ve driven that has progressive springs has that same sensation. Also his make noise as well. An option that is now available that was not when I got mine is the Greddy coil overs which are using KW single adj. dampers but with linear springs. Otherwise the powertrix have held up well and I believe they are on a big sale again so great time to buy if your looking that route.

05-24-2020, 06:57 PM	#17 (permalink)
GooglyMoogly Base Member Join Date: Aug 2018 Location: Vancouver Posts: 27 Drives: 2014 370z 6MT Rep Power: 7	Already got one on the way with SPL endlinks. Got the front hotschik..... 100% spelt it wrong. redondoaveb likes this.

05-24-2020, 07:41 PM	#19 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,235 Drives: 15 370Z Nismo 6MT Rep Power: 214100	Folks seem satisfied with the kw v3’s build quality and greet comfort but they are not up to snuff for performance oriented driving. Also, limited lowering capability, no top mounts and no pillowballs anywhere Heard very little of the rs-r but the specs indicate similar limitations Fortune Auto and PowerTrix are in the same price range and give you pillow balls more adjustment with rebuild ability stateside and customization if you want. I think BC does too. Hotrodz here tracks his car on fortunes effectively. Jarblue as well JARblue and ZontheRocks like this. __________________ OptionZero Build Thread

05-24-2020, 08:18 PM	#21 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,366 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	KW V3's are more than capable for spirited street/canyon driving. They also have 2" front and 1.7" rear lowering capabilities. My current car came with BC ER's and they were so bad, I removed them and replaced them with the KW's. Not an expense I wanted at the time but the BC's were complete junk. __________________ Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 700+whp

05-24-2020, 08:37 PM	#22 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,236 Drives: 09 Nismo, 16 Nismo Rep Power: 163995	V3 is very capable. The only thing I’ve heard is spring rate isn’t high enough to use with full slicks. I forgot his username...a known track guy, he tracked a motoiq 370z with V3 Rusty and redondoaveb like this. __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield

05-25-2020, 03:05 AM	#26 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,235 Drives: 15 370Z Nismo 6MT Rep Power: 214100	I prefer professors over meisters myself Spooler and Mike_O_Nite like this. __________________ OptionZero Build Thread

05-24-2020, 10:33 PM	#24 (permalink)
GooglyMoogly Base Member Join Date: Aug 2018 Location: Vancouver Posts: 27 Drives: 2014 370z 6MT Rep Power: 7	What do you guys think of tein flex z?

05-25-2020, 07:16 PM	#27 (permalink)
justin_boy Track Member Join Date: May 2015 Location: woodland hills Posts: 600 Drives: z34 Rep Power: 8367	I run the V3's along with spl front and rear billet arms. going back I wish i wouldve went with fortune 500's cause the KW's squeak like a mofo if youre going all out with suspension youd be a fool not to run crazy specs in my stupid opinion. good luck with everything!!

05-25-2020, 10:50 PM	#29 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,235 Drives: 15 370Z Nismo 6MT Rep Power: 214100	I prefer monoball mounts on the coilovers Spooler likes this. __________________ OptionZero Build Thread

05-27-2020, 12:56 AM	#30 (permalink)
Jhill Track Member Join Date: Mar 2016 Location: San jose Posts: 854 Drives: 2013 370z sport Rep Power: 3384	I went the powertrix route because of Charles support and I’ve been happy with them but like most I don’t have anything to compare them against. The thing that turned me off to the V3’s were they don’t give the coil spring rate and then when I called and got someone to give me the rate they seemed rather soft compared to other options and then also they are progressive rate springs which I’m just not a fan of. I tested them in my buddies m3 (he likes em) and I know it is not apples to apples at all but it still had that unsure lean over in turns that I feel is largely due to the progressive spring since every car I’ve driven that has progressive springs has that same sensation. Also his make noise as well. An option that is now available that was not when I got mine is the Greddy coil overs which are using KW single adj. dampers but with linear springs. Otherwise the powertrix have held up well and I believe they are on a big sale again so great time to buy if your looking that route. cv129 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Am I choosing the right coilovers, and what supporting mods do I need?	broZ	Brakes & Suspension	12	04-26-2018 10:12 AM
AAM Twin Turbo Build supporting mods?	370z46	Forced Induction	29	04-29-2017 01:24 PM
[WTB] Supporting mods for turbo (Oil cooler, Injectors, etc)	squid267	Parts for sale (Private Classifieds)	2	05-13-2016 06:56 PM
TT supporting mods and suggestions.	2011 Nismo#91	Forced Induction	18	10-09-2013 10:12 AM