fastbrakes 2 piece slotted rotors

LateralG'z · 03-17-2010, 09:33 PM

do they offer drilled & slotted 2-piece?

NYBladeZ · 03-18-2010, 01:45 PM

I'm going to hold out, a great piece though, 24lbs off the front is a good savings

FuszNissan · 03-18-2010, 10:26 PM

J hook FTW

RCZ · 03-19-2010, 11:19 AM

Yes, I would be interested in some fixed 2 piece rotors.

dude5000 · 04-20-2010, 12:01 AM

Quote:

Originally Posted by RCZ

Yes, I would be interested in some fixed 2 piece rotors.

me too, both front and rear to save on unsprung mass. I personally have no use for racing calipers nor can I afford a BBK.

Wasn't Stillen planning on releasing a 2-piece rotor sometime?

PS: I hope the rear hat is made from aluminum.

Scott @ RA · 04-20-2010, 03:24 AM

Quote:

Originally Posted by dude5000

me too, both front and rear to save on unsprung mass. I personally have no use for racing calipers nor can I afford a BBK.

Wasn't Stillen planning on releasing a 2-piece rotor sometime?

PS: I hope the rear hat is made from aluminum.

Yes, we offer both the front AND rear light weight two piece rotors as a package, or even just the rears or just the fronts separately a well....

...And yes, our front AND rear rotor hats are both made of aircraft grade forged billet aluminum

Endgame · 03-19-2010, 02:27 PM

i would be interested in this.... As long as I could use the stock caliphers.... if i wanted to...

Valentino · 03-19-2010, 10:47 PM

AP - Chris_B, check your PM.

AP - Chris_B · 03-20-2010, 12:44 PM

Quote:

Originally Posted by Valentino

AP - Chris_B, check your PM.

Got it -- replied!

Chris

Equinox · 03-20-2010, 07:25 PM

<3

Scott @ RA · 03-28-2010, 09:47 AM

Interesting posts in here, and interest in Akebono two piece rotors.

A quality front AND REAR two piece rotor kit will be available very soon...

Endgame · 04-01-2010, 07:19 PM

Is there a website we can go to look at??

Scott @ RA · 04-01-2010, 08:22 PM

We have a solution that addresses all four (front and rear) 2 piece light weight rotors, heat treated, full floating, gas vented (slotted), directionally and rotationally pillar veined, with aircraft grade billlet aluminum rotor hats. Nothing but the best quality, the complete kit is also 100% made here by us in America, and rigorously street and track tested..

Let me know if anyone is interested....

1slow370 · 04-01-2010, 11:54 PM

Quote:

Originally Posted by Scott @ RA

We have a solution that addresses all four (front and rear) 2 piece light weight rotors, heat treated, full floating, gas vented (slotted), directionally and rotationally pillar veined, with aircraft grade billlet aluminum rotor hats. Nothing but the best quality, the complete kit is also 100% made here by us in America, and rigorously street and track tested..

Let me know if anyone is interested....

I'm interested but is it just me or do those rear hats have the E-brake pads riding on aluminum? Thats like something the Russians would do (watch more Top Gear if you find anything wrong with this comment). Any possibility of fitting a steel sleeve in that bore?

Brazilbro · 04-01-2010, 10:39 PM

pm pricing please, and weights

03-17-2010, 09:33 PM	#1 (permalink)
LateralG'z Track Member Join Date: Nov 2009 Location: Oklahoma Posts: 876 Drives: 370z Rep Power: 17	do they offer drilled & slotted 2-piece? __________________ 2010 Mag Black, 6MT,

03-18-2010, 01:45 PM	#2 (permalink)
NYBladeZ A True Z Fanatic Join Date: Apr 2009 Location: New York Posts: 2,158 Drives: Lotus Exige S Rep Power: 20	I'm going to hold out, a great piece though, 24lbs off the front is a good savings __________________ 2009 Carbon Fiber/Red 370z aka Trish: Sports Package, Meisterschaft full catback, Fast Intentions Longtube Headers, Injen Long Tube Intakes, UpRev Tune: Sold 2008 Lotus Exige S Club Racer aka Bella, always leaves me smiling

03-18-2010, 10:26 PM	#3 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 542	J hook FTW __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

03-19-2010, 10:47 PM	#8 (permalink)
Valentino Enthusiast Member Join Date: Jan 2009 Location: RaceTrack Posts: 349 Drives: SOLD 09,370z,M6 Rep Power: 306	AP - Chris_B, check your PM. __________________ Lou Fusz Nissan \| KW V3 \| SPL rear camber and toe bolt \| OS Giken LSD \| Nismo Diff cover \| Engine Oil cooler \| F.I. TDX Cat Back 18" Resonators \| F.I. Resonated Test Pipes \| Injen cold air intake \| COBB AccessPORT \| JWT Clutch Flywheel \|

03-20-2010, 07:25 PM	#10 (permalink)
Equinox Track Member Join Date: Jul 2009 Location: Beaumont, TX Posts: 685 Drives: 06 Porsche Carrera S Rep Power: 18	<3 __________________ Check out my Albums '13 Subaru WRX STi \| '06 Porsche 911 Carrera S (SOLD) \| '96 Mazda RX-7 6.0L V8 RHD (SOLD) \| '09 Nissan Nismo #0058 (SOLD)

03-19-2010, 11:19 AM	#4 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	Yes, I would be interested in some fixed 2 piece rotors.

03-19-2010, 02:27 PM	#7 (permalink)
Endgame A True Z Fanatic Join Date: Nov 2008 Location: Phoenix Posts: 1,613 Drives: Nothing Now! Rep Power: 224	i would be interested in this.... As long as I could use the stock caliphers.... if i wanted to...

03-28-2010, 09:47 AM	#11 (permalink)
Scott @ RA Enthusiast Member Join Date: Feb 2010 Location: So Cal Posts: 410 Drives: Ridiculously Fast Rep Power: 16	Interesting posts in here, and interest in Akebono two piece rotors. A quality front AND REAR two piece rotor kit will be available very soon...

04-01-2010, 07:19 PM	#12 (permalink)
Endgame A True Z Fanatic Join Date: Nov 2008 Location: Phoenix Posts: 1,613 Drives: Nothing Now! Rep Power: 224	Is there a website we can go to look at??

04-01-2010, 08:22 PM	#13 (permalink)
Scott @ RA Enthusiast Member Join Date: Feb 2010 Location: So Cal Posts: 410 Drives: Ridiculously Fast Rep Power: 16	We have a solution that addresses all four (front and rear) 2 piece light weight rotors, heat treated, full floating, gas vented (slotted), directionally and rotationally pillar veined, with aircraft grade billlet aluminum rotor hats. Nothing but the best quality, the complete kit is also 100% made here by us in America, and rigorously street and track tested.. Let me know if anyone is interested.... Last edited by Scott @ RA; 04-01-2010 at 09:07 PM.

04-01-2010, 10:39 PM	#15 (permalink)
Brazilbro A True Z Fanatic Join Date: Mar 2009 Location: Indianapolis, IN Posts: 1,131 Drives: Juke/240Z Rep Power: 849	pm pricing please, and weights __________________ Juke AWD/240Z SR20 08 Evo 10(Stage 2) SOLD Fastest Sport 6spd 370Z 11.8 @126.5SOLD

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ROTORA CROSS DRILLED AND SLOTTED ROTORS for 370z Sport now available at AMPLIFIED	LOU@AMPLIFIED	Suspension/Brakes	11	06-23-2013 01:18 PM
2-piece slotted rotor.	ZforMe	Brakes & Suspension	101	01-23-2011 04:37 PM
Cross-Drilled/Slotted Rotors for Non-Sport?	bowenmedia	Brakes & Suspension	5	12-14-2009 12:14 PM
Advantages to slotted or drilled rotors? I don't think so.	Acepro	Brakes & Suspension	27	11-19-2009 12:35 PM
Question pertaining to Cross Drilled/slotted rotors	nq23	Suspension/Brakes	0	07-31-2009 07:18 PM