R35 GTR Brakes on Z34

Spooler · 11-25-2019, 10:52 PM

Quote:

Originally Posted by andy_meng1024

They did it because Nissan is paying.

iPhoneTapatalk

That is just speculation. This is going to be Z1's time attack car. If it was Nissan's, they would hand it over after SEMA.

cv129 · 11-26-2019, 12:47 AM

The 350z guys did it, may wanna research my350z forum.

Didn’t read through it myself, but here is a thread

https://my350z.com/forum/brakes-and-...ff-an-r35.html

FL 4Motion · 11-26-2019, 02:15 AM

Quote:

Originally Posted by DaveZ03

Is this for purely show purposes? Or is this for performance purposes? My two cents....If this is just for a street car, it's not worth the time and effort it will take to find and install everything respectively.
If track car only, I feel there are better options that won't require as much time/$$$ investment (spit balling here on the $$$, but I'm willing to bet that anything with GTR attached to it will be elevated in cost), that will perform on par or better.
If it's a mix of street/track driving, not worth it.

Finally if this is being done purely for car resume purposes and for show conversation pieces, I feel the desired effect may be achieved, but the return on investment wouldn't be worth it to me. Good luck and if you are stuck on doing this, make sure to do it right the first time and don't try cutting corners.

/\. This. The only good reason to do this is for the “cool, unique” factor. If this for a performance upgrade, it makes no sense. The r35 brownbos aren’t the best calipers for hpde or road course racing anyway, caliper flex and melting seal issues and non castellated pistons etc, most gtr guys upgrade them to pro 5000r ap competition radical caliper bbk or something else equivalently better. The gtr calipers are still street brakes at the end of the day. For the z34, imo, the best track bbk out there is the stoptech trophy race bbk.

As for z1 apparently doing it, they’re doing it for the cool unique factor guaranteed since it’ll bring their shop attention and then hopefully $$$. Also, if it’s a shop car, they can expense the “investment”.

2011 Nismo#91 · 11-26-2019, 08:33 AM

Quote:

Originally Posted by milmast

You guys make it seem like brakes are super complicated.

JARblue · 11-26-2019, 09:09 AM

Money is not the deterring factor...

OP in this thread:

vtec to vvel · 11-26-2019, 11:09 AM

Quote:

Originally Posted by milmast

I strongly disagree with that. How many people have access to very cheap R35 parts..? Probably not a lot, hence why it either hasn't been documented, or hasn't been attempted. The spindles alone from the R35s are $1000 each. It very well may be easy and simple, but if its stupid expensive, that single part will deter people from attempting it as it could be money down the drain whereas BBKs like AP racing have been tested ample times on the Z platform.

You do understand there are many members here that have and will continue to drop large amounts of $$ to upgrade their Z right? Some members to which they could have completed the GTR brake conversion a few times. There are many members on here that won't even blink at a $1000+ price tag for a single part.

You claim to have access to cheap R35 parts. Congrats and good for you. With the money you are saving with access to such parts, go through with your conversion and keep us posted.

vtec to vvel · 11-26-2019, 07:41 PM

OP, since you have access to cheap R35 parts, why not just build your own from scratch?

OptionZero · 11-28-2019, 11:34 PM

What is the purpose of the swap?

From a performance standpoint, there are options that are better for the track (Brembo GT or GT-R, Stoptech). Essex Performance will build you whatever you need with Brembo parts and it bolt right up.

Before going there, though, you need to ask if you've actually exceeding the capacity of OEM brakes. If you're on street tires and bumming around the street you will never touch the limits. If you haven't maxed out the braking power of whatever tires you're on, you don't need new brakes anyways

For "cool" factor, i guess its fine to be able to say you have GTR brakes, but they do not bolt up. Omori Factory makes adapters, but good luck getting those. Z1 strongly implied that are working on a mass production adapter, so you should probably just ask them

11-26-2019, 12:47 AM	#17 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,237 Drives: 09 Nismo, 16 Nismo Rep Power: 163995	The 350z guys did it, may wanna research my350z forum. Didn’t read through it myself, but here is a thread https://my350z.com/forum/brakes-and-...ff-an-r35.html milmast likes this. __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield

11-26-2019, 09:09 AM	#20 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Money is not the deterring factor... OP in this thread: Rusty, Hotrodz, Optimiser and 2 others like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

11-26-2019, 07:41 PM	#22 (permalink)
vtec to vvel A True Z Fanatic Join Date: Feb 2015 Location: 813 Posts: 3,915 Drives: 13 Z Rep Power: 502909	OP, since you have access to cheap R35 parts, why not just build your own from scratch? __________________ Don't like what I post? Too bad. I really don't give a sh!t

11-28-2019, 11:34 PM	#23 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,235 Drives: 15 370Z Nismo 6MT Rep Power: 214100	What is the purpose of the swap? From a performance standpoint, there are options that are better for the track (Brembo GT or GT-R, Stoptech). Essex Performance will build you whatever you need with Brembo parts and it bolt right up. Before going there, though, you need to ask if you've actually exceeding the capacity of OEM brakes. If you're on street tires and bumming around the street you will never touch the limits. If you haven't maxed out the braking power of whatever tires you're on, you don't need new brakes anyways For "cool" factor, i guess its fine to be able to say you have GTR brakes, but they do not bolt up. Omori Factory makes adapters, but good luck getting those. Z1 strongly implied that are working on a mass production adapter, so you should probably just ask them __________________ OptionZero Build Thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] WTB: looking sport brakes or anni red brakes	Z-Roc	Parts for sale (Private Classifieds)	0	03-21-2014 03:37 PM
Brakes, brakes, any deals on brakes?	zFire	Wanted	9	03-11-2011 09:40 PM
sport brakes painted akebono brakes	kensin0429	Exterior & Interior	6	08-23-2009 11:06 PM
Touring Brakes vs Base Brakes	hey32g	Brakes & Suspension	7	07-19-2009 12:55 PM