How to remove subframe cross brace?

gshort24

I got the brackets welded on etc, the location of the bracket and the bolt holes appear to be the same as the OEM sample part that I have which has the brackets. It sounds like you have a Nismo that came with these performance dampeners. Can you do me a favor and check the clearance between the performance damper bracket and the lower control arm?

Mine is not touching, but it's pretty close, I can't stick a finger tip in between the bracket and the suspension arm. Is this OK or do I need more clearance in case I hit a large bump etc. It's hard to get a clear pic of the gap because of the shadows and the camera has to be at the perfect angle etc.

Attached Images

	1.jpg (65.4 KB, 12 views)
	2.jpg (63.4 KB, 11 views)
	3.jpg (62.0 KB, 11 views)
	4.jpg (65.3 KB, 9 views)

Rusty

Left side, I have about 5/8" clearance. The right side is about 1/2" clearance.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html