Nissan 370Z Forum - Stripped caliper bleed hole

Page 2 of 2

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Brakes & Suspension (http://www.the370z.com/brakes-suspension/)

- - Stripped caliper bleed hole (http://www.the370z.com/brakes-suspension/131604-stripped-caliper-bleed-hole.html)

g96818

07-29-2019 05:24 PM

I think bleeder screws are about 10 ft-lbs. Don't quote me, should always check the manual

Rusty

07-29-2019 06:26 PM

Quote:

Originally Posted by g96818 (Post 3869998)

I think bleeder screws are about 10 ft-lbs. Don't quote me, should always check the manual

7.9 N-m, 0.81 Kg-m, 70 in lbs or 5.8 ft lbs.

dts3	07-29-2019 09:02 PM

I ended up ordering these:
Bleeder screw hole repair

Doorman's own website says they'll work with 10mm bleed screws, and the amazon listing says the outer sleeve is 1/4 NPT, which is larger than the 7/16 I bored out too. Hopefully this will work. I'll take pics and report back.

All times are GMT -5. The time now is 09:13 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page