Whiteline Rear Diff Bushing Install

bkngo · 02-10-2019, 03:59 PM

Here's another video... Hope it helps... If you have wheel hops, loud thunks noise during shifts, hard shifts, and traction problem... this will eliminate the wheel hops, no more hard shifts or thunk noises, and better traction!!! Please watch, like, and subscribe for more videos!

https://www.youtube.com/watch?v=Hna7...ature=youtu.be

Rusty · 02-11-2019, 10:01 PM

You doing the hard way. I've done 3 of these. 2 SPL's and a Z1 poly. Instead of drilling the inner rubber of the bushing. Use a deep 2" hole saw to cut the center out. Once you cut the outer shell in 2 places. Use a muffler cutting tool at the 2 cuts. I can pop a diff bushing out in 20 minutes. Once removed. Use a flapper wheel to clean up and smooth out the bore. Then coat the bore with anti-seize. The bore is not perfectly round. It's egg shaped from welding.

02-10-2019, 03:59 PM	#1 (permalink)
bkngo Track Member Join Date: Jan 2015 Location: San Antonio Posts: 653 Drives: 09 370Z K51 M6 Rep Power: 39	Whiteline Rear Diff Bushing Install Here's another video... Hope it helps... If you have wheel hops, loud thunks noise during shifts, hard shifts, and traction problem... this will eliminate the wheel hops, no more hard shifts or thunk noises, and better traction!!! Please watch, like, and subscribe for more videos! https://www.youtube.com/watch?v=Hna7...ature=youtu.be __________________ Fly1 Zele\|Stillen G3\|FI CBE 18" RES w/quad tips\|FI RTP\|UpRev\|IJDM LED Halos\|6k HIDs\|LEDs\|JDM PW Shifter\|NAVTOOL V2

02-11-2019, 10:01 PM	#2 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,361 Drives: 2011 Nismo GM 6M Rep Power: 2684438	You doing the hard way. I've done 3 of these. 2 SPL's and a Z1 poly. Instead of drilling the inner rubber of the bushing. Use a deep 2" hole saw to cut the center out. Once you cut the outer shell in 2 places. Use a muffler cutting tool at the 2 cuts. I can pop a diff bushing out in 20 minutes. Once removed. Use a flapper wheel to clean up and smooth out the bore. Then coat the bore with anti-seize. The bore is not perfectly round. It's egg shaped from welding. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Whiteline rear Diff bushing kit in stock at B2autodesigns	b2autodesigns	Drivetrain/Engine	298	07-04-2019 07:09 AM
[FOR SALE] Z1 UCA's, Whiteline Rear Diff Bushing Set	Boost_lee	Parts for sale (Private Classifieds)	4	11-22-2017 05:08 PM
whiteline diff bushing gear noise	secondnissan	Engine & Drivetrain	41	08-08-2016 04:13 PM
Rear Diff bushing, which on top?	YzGyz	Engine & Drivetrain	6	01-29-2015 08:50 PM
350z Whiteline Diff bushing install	go7roo7	DIY Section (Do-It-Yourself)	0	05-20-2014 07:39 AM