Bell Raceworks Diff Brace Install

Rusty · 06-25-2019, 05:31 PM

Quote:

Originally Posted by BettyZ

Me 5. I'm thinking you need to set up an LLC. Maybe call it RAAM: Rusty's After-Aftermarket.

Sent from my SM-G955U using Tapatalk

My garage has already been called Rusty's Little Shop of Horrors for some of the weird stuff that has come out of it over the years.

fechavez · 06-25-2019, 06:50 PM

So I will completely agree with the fact that I can see why clearance is an issue and that it is the shadiest of shady moves for Z1 to delete reviews, However, my top hole that attached to the sub frame wasn’t an issue. I can see why it sucked for Rusty since he’s running solid bushings but I feel that anecdotally most people are probably running white line or Z1 diff bushings(me) or some sort of poly bushings so at-least that won’t be a problem.

Sent from my iPhone using Tapatalk

Rusty · 06-25-2019, 10:05 PM

Quote:

Originally Posted by fechavez

So I will completely agree with the fact that I can see why clearance is an issue and that it is the shadiest of shady moves for Z1 to delete reviews, However, my top hole that attached to the sub frame wasn’t an issue. I can see why it sucked for Rusty since he’s running solid bushings but I feel that anecdotally most people are probably running white line or Z1 diff bushings(me) or some sort of poly bushings so at-least that won’t be a problem.

Sent from my iPhone using Tapatalk

Since my bitchin'. They may have changed it so it fits now.

You have a pic of the brace installed?

fechavez · 06-25-2019, 11:27 PM

Quote:

Originally Posted by Rusty

Since my bitchin'. They may have changed it so it fits now.

You have a pic of the brace installed?

Sent from my iPhone using Tapatalk

Rusty · 06-25-2019, 11:49 PM

You have a ton of clearance.

Spooler · 06-26-2019, 12:01 AM

That is not clearing a Fast Intentions exhaust. It's the same brace as before.

Rusty · 06-26-2019, 01:13 AM

Quote:

Originally Posted by Spooler

That is not clearing a Fast Intentions exhaust. It's the same brace as before.

They may have moved the bolt hole up top. You can't see it in that pic.

fechavez · 06-26-2019, 01:26 AM

Quote:

Originally Posted by Rusty

They may have moved the bolt hole up top. You can't see it in that pic.

Honestly have no clue if anything has been changed on it.

All I know is that to install it all I did was lift the diff and maybe half way thread the bushing bolts and the brace bolts that go into the diff itself, then halfway thread the brace-bolt into the subframe. Once everything was threaded I torqued down the bushing bolts and the brace-cover bolts. Then I torqued the axles and drive shaft then at the very end i torqued down the brace-subframe bolt.

I can definitely see why it wouldn’t work for some people but it did for me

Sent from my iPhone using Tapatalk

Spooler · 07-23-2019, 09:35 PM

I posted on the YouTube video about these. LOL More than one way to skin a cat.

Hotrodz · 07-24-2019, 12:05 AM

Quote:

Originally Posted by Spooler

I posted on the YouTube video about these. LOL More than one way to skin a cat.

So how come you didn't post it here?

Spooler · 07-24-2019, 12:21 AM

Quote:

Originally Posted by Hotrodz

So how come you didn't post it here?

What, that they don't fit for crap and need modifying or the video. I got that. The part was sand/media blasted
to remove all paint. The B in the part was welded up. The part was then clearance for the FI exhaust. Once the fitment
was good, the part was repainted and installed back on the car after it dried.

Hotrodz · 07-24-2019, 12:55 AM

Quote:

Originally Posted by Spooler

What, that they don't fit for crap and need modifying or the video. I got that. The part was sand/media blasted
to remove all paint. The B in the part was welded up. The part was then clearance for the FI exhaust. Once the fitment
was good, the part was repainted and installed back on the car after it dried.

Yep, no responses to will they fit with an FI exhaust!

Joker_J · 09-15-2019, 11:33 PM

I just had the Motordyne Exhaust installed.
I'm guessing i'll have clearance issues as well ... :/

solidus · 09-16-2019, 04:48 PM

Quote:

Originally Posted by Joker_J

I just had the Motordyne Exhaust installed.
I'm guessing i'll have clearance issues as well ... :/

I was supposed to install mine awhile back and forgot the box. I've looked at it and it's looking like it may fit. I'm thinking that because the damned Motordyne vbands are capable of all kinds of jackassery in that area. It's right where the 45 degree bend out to the hubs is located. On my car the exhaust kinda hangs down there so thats why I think there may be some space. But with my luck I'll dryfit it and it'll look like a go then as soon as I remove the bolts it'll be impossible.

Spooler · 09-16-2019, 11:23 PM

Quote:

Originally Posted by solidus

I was supposed to install mine awhile back and forgot the box. I've looked at it and it's looking like it may fit. I'm thinking that because the damned Motordyne vbands are capable of all kinds of jackassery in that area. It's right where the 45 degree bend out to the hubs is located. On my car the exhaust kinda hangs down there so thats why I think there may be some space. But with my luck I'll dryfit it and it'll look like a go then as soon as I remove the bolts it'll be impossible.

Take a picture of your exhaust and send it to me via text. I can look at it and tell if it will fit or not.

06-25-2019, 11:49 PM	#125 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,173 Drives: 2011 Nismo GM 6M Rep Power: 2684437	You have a ton of clearance. redondoaveb likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

06-26-2019, 12:01 AM	#126 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,792 Drives: 2013 Nismo 370z Rep Power: 2684392	That is not clearing a Fast Intentions exhaust. It's the same brace as before. Hotrodz and redondoaveb like this.

07-23-2019, 09:35 PM	#129 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,792 Drives: 2013 Nismo 370z Rep Power: 2684392	I posted on the YouTube video about these. LOL More than one way to skin a cat. gbrettin, Hotrodz and BettyZ like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2015+ Nismo Rear Chassis Brace Install	nismolucino	DIY Section (Do-It-Yourself)	9	02-22-2021 12:00 PM
Z1 Brake Master Cylinder Brace - Install Help	140BPM	Brakes & Suspension	10	04-22-2019 10:06 PM
Has anyone been able to install a Z1 master cylinder brace?	gshort24	Brakes & Suspension	4	08-11-2016 03:05 PM
Rear brace bar removal/install?	TriNismo	Exterior & Interior	8	08-18-2015 12:02 AM

06-25-2019, 06:50 PM	#122 (permalink)
fechavez Base Member Join Date: Oct 2018 Location: Santa Fe, NM Age: 30 Posts: 27 Drives: 11' Sport 6MT Rep Power: 7	So I will completely agree with the fact that I can see why clearance is an issue and that it is the shadiest of shady moves for Z1 to delete reviews, However, my top hole that attached to the sub frame wasn’t an issue. I can see why it sucked for Rusty since he’s running solid bushings but I feel that anecdotally most people are probably running white line or Z1 diff bushings(me) or some sort of poly bushings so at-least that won’t be a problem. Sent from my iPhone using Tapatalk

09-15-2019, 11:33 PM	#133 (permalink)
Joker_J Track Member Join Date: Aug 2014 Location: The Ville, KY Posts: 580 Drives: 2014 NISSAN 370Z Rep Power: 13	I just had the Motordyne Exhaust installed. I'm guessing i'll have clearance issues as well ... :/