Nissan 370Z Forum
Page 4 of 5 « First 23 4 5
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Brakes & Suspension (http://www.the370z.com/brakes-suspension/)
-   -   Help with rear toe!! (http://www.the370z.com/brakes-suspension/126801-help-rear-toe.html)

Hotrodz 06-04-2020 06:23 PM
Quote:
Originally Posted by shadow85 (Post 3939314)
Lol I listened to your advice on getting good suspension arms and going to good aligment tech referred to by a motorsport shop.



Am I still the culprit?
Only time will tell!

Sent from my SM-G965U using Tapatalk

Rusty 06-04-2020 07:10 PM
OZ personality is like 00 grit sandpaper. When he rubs up against you. You know you will be missing some skin. He means well. :rofl2:

AlWakRa 06-04-2020 07:36 PM
Quote:
Originally Posted by shadow85 (Post 3939131)
So I ended up ordering Voodoo13 FUCA, rear camber and rear toe arms, SPL Adjustable bumpteer front outer tie rod ends, Spl eccentric lockout kit.

Will take all this to a good alignment tech I was refered to by a motorsport wheel shop here and see if this all fixes my stability issues. Otherwise I have just wasted a **** ton of money.

Do you have a true type coilovers?

shadow85 06-04-2020 09:03 PM
Quote:
Originally Posted by Hotrodz (Post 3939316)
Only time will tell!

Sent from my SM-G965U using Tapatalk
Lol
But I am your apprentice. I may fail you!

Quote:
Originally Posted by AlWakRa (Post 3939338)
Do you have a true type coilovers?
Yes. MCA Grey (Street Ultimate)

AlWakRa 06-05-2020 04:05 PM
Okay MCA, they don't make oem style at all, I have red series on my car, so no bad news about the parts you bought as toe arms works with true type only.

shadow85 06-06-2020 07:59 AM
Quote:
Originally Posted by AlWakRa (Post 3939549)
Okay MCA, they don't make oem style at all, I have red series on my car, so no bad news about the parts you bought as toe arms works with true type only.
Yup, i asked them before i bought it. They said they were true coilovers

BettyZ 06-06-2020 10:36 PM
Quote:
Originally Posted by shadow85 (Post 3939131)
So I ended up ordering Voodoo13 FUCA, rear camber and rear toe arms, SPL Adjustable bumpteer front outer tie rod ends, Spl eccentric lockout kit.

Will take all this to a good alignment tech I was refered to by a motorsport wheel shop here and see if this all fixes my stability issues. Otherwise I have just wasted a **** ton of money.
Voodoo FUCA is a ripoff of the SPC FUCA which themselves are second-tier.

Truly hope you have an aftermarket parts rider on your insurance.

Sent from my SM-G955U using Tapatalk

OptionZero 06-06-2020 11:12 PM
I don't think the Voodoo13 rears are SPC knockoffs tho

Example of rear camber arms:

Voodoo13
https://274048-850599-raikfcquaxqnco...CNS-0400HC.jpg

SPC:
https://www.z1motorsports.com/includ...x903_72260.jpg

For reference, SPL:
https://www.z1motorsports.com/includ...0-9c07d484.JPG

Obviously the SPL is the beefiest, with their patented triple adjuster thats easy work for alignment techs.

Curious why the Voodoo13 is straight while OEM, SPL, and SPC are all kinked.

madwi 06-06-2020 11:16 PM
Voodoo has a good rep. from what I've heard.

Rusty 06-07-2020 12:54 AM
Quote:
Originally Posted by madwi (Post 3939844)
Voodoo has a good rep. from what I've heard.
:iagree:

k67p67 06-07-2020 02:20 AM
Quote:
Originally Posted by BettyZ (Post 3939841)
Voodoo FUCA is a ripoff of the SPC FUCA which themselves are second-tier.
That's incorrect. Voodoo13 FUCAs are a solid alternative to SPL. They use heim joints rather than the OEM style used by SPC.

shadow85 06-08-2020 06:59 PM
Quote:
Originally Posted by OptionZero (Post 3939843)
Curious why the Voodoo13 is straight while OEM, SPL, and SPC are all kinked.
I think was just for clearance purpose correct? The straight arms will only clear OEM sway bars and not be able to clear the beefier aftermarket sway bars, whilst the kinked arms will clear them.

Voodoo13 offers a high clearance version of this arm which has the kink in it.


Quote:
Originally Posted by k67p67 (Post 3939857)
That's incorrect. Voodoo13 FUCAs are a solid alternative to SPL. They use heim joints rather than the OEM style used by SPC.
Well I hope so because I already have the SPC FUCA instslled, V1 though. So I am hoping these Voodoo13 are a solid upgrade when I go get a much needed alignment done next.

OptionZero 06-08-2020 10:03 PM
After every ******* person told you to go SPL, you STILL ignored us and went another route.
If anything goes wrong, I don’t wanna see another fuckin post from you unless it’s about selling the car to someone with some goddamn sense. Or a video of something breaking, so we can laugh

Rusty 06-08-2020 10:10 PM
Quote:
Originally Posted by OptionZero (Post 3940361)
After every ******* person told you to go SPL, you STILL ignored us and went another route.
If anything goes wrong, I don’t wanna see another fuckin post from you unless it’s about selling the car to someone with some goddamn sense. Or a video of something breaking, so we can laugh
:rofl2:

shadow85 06-09-2020 02:14 AM
Quote:
Originally Posted by OptionZero (Post 3940361)
After every ******* person told you to go SPL, you STILL ignored us and went another route.
If anything goes wrong, I don’t wanna see another fuckin post from you unless it’s about selling the car to someone with some goddamn sense. Or a video of something breaking, so we can laugh
Hahahaha, i expected this reaction from you. <3 <3 <3

Nah honestly, Voodoo13 isn't that much of a different route, it's probably almost identical in performance and strength. I did get SPL adj. Bumpsteer kit, doesn't that make you happy? :)

Btw if the car blows up soon, which I feel like it may, I will personally PM you first the video lol.

Peace bro.
<3


All times are GMT -5. The time now is 06:41 AM.
Page 4 of 5 « First 23 4 5
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2