Help 2nd set of new brake pads squeaking

Originally Posted by SouthArk370Z

Bedding Procedure
1) Find someplace where you can do the following safely.
2) Get car up to about 60 mph.
3) Hit the brakes hard (if ABS doesn't kick in, you're probably not doing it hard enough) and slow to about 10 mph. Do not come to a complete stop.
4) Repeat steps 2 and 3 a few times.
5) Drive around until pads and rotors cool off. Slow speed; no stops; use brakes as little as possible.
6) Done.

Edit: Carbotech bedding procedure