Rear Sub-Frame Bushings

B&W_Evader · 01-19-2018, 10:20 AM

Quote:

Originally Posted by Hotrodz

You got to realize that it is metal on metal and that will cause some squeaking. I spray my fittings down with lithium grease and that keeps the noise to a minimum!

Seems like you could add a thin film of teflon or other slick plastic to get rid of the squeeking.

sirnixalot · 01-19-2018, 10:26 AM

Quote:

Originally Posted by B&W_Evader

Seems like you could add a thin film of teflon or other slick plastic to get rid of the squeeking.

Anti seize is your friend

Rusty · 01-19-2018, 09:45 PM

SPL is now shipping 4 pieces of rubber with the bushings to install between the bushing and body to stop the squeaking, and transfer of noise if you want to.

Hotrodz · 01-19-2018, 10:28 PM

Quote:

Originally Posted by Rusty

SPL is now shipping 4 pieces of rubber with the bushings to install between the bushing and body to stop the squeaking, and transfer of noise if you want to.

To late for me!

Rusty · 01-20-2018, 12:06 AM

Quote:

Originally Posted by Hotrodz

To late for me!

I'm thinking on going au naturale myself.

jchammond · 01-20-2018, 06:51 AM

Quote:

Originally Posted by sirnixalot

Anti seize is your friend

Sent from my iPhone using Tapatalk

sirnixalot · 01-20-2018, 07:37 AM

Quote:

Originally Posted by jchammond

Sent from my iPhone using Tapatalk

Truth

Jayhovah · 01-20-2018, 10:37 AM

Quote:

Originally Posted by sirnixalot

Truth

For sure. I have that exact bottle on the shelf and it gets like everywhere.

B&W_Evader · 01-23-2018, 03:16 PM

So I went ahead and got the collars. Only $150 and supposedly not to big of a job to drop them in. You guys with them experience any squeaking? I'm debating on whether to grease them up or not.

JLarson · 01-23-2018, 03:22 PM

Quote:

Originally Posted by B&W_Evader

So I went ahead and got the collars. Only $150 and supposedly not to big of a job to drop them in. You guys with them experience any squeaking? I'm debating on whether to grease them up or not.

I put these in last week. No squeaking so far, noticeable improvement in rigidity. I'd never dropped the rear sub-frame, so it was a bit of a learning curve, but if you already know how to do that, it's probably a 30 minute job. Took me more like 2 hours, most of which was me staring blankly at the underside of my car

The bushing collars go in pretty easily.

Rusty · 01-23-2018, 05:00 PM

Quote:

Originally Posted by JLarson

I put these in last week. No squeaking so far, noticeable improvement in rigidity. I'd never dropped the rear sub-frame, so it was a bit of a learning curve, but if you already know how to do that, it's probably a 30 minute job. Took me more like 2 hours, most of which was me staring blankly at the underside of my car

The bushing collars go in pretty easily.

Know that feeling. Staring at it and wondering if I REALLY want to do this.

El Zombo · 01-26-2018, 08:15 PM

https://www.youtube.com/watch?v=ToGqZ_ZVd1I

Z1 Collar Bushing video (5 minute video).

JLarson · 02-12-2018, 11:08 AM

Video is fine, but not helpful for doing the actual work, besides giving you a general idea of what you'll be working on.

01-19-2018, 09:45 PM	#18 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,220 Drives: 2011 Nismo GM 6M Rep Power: 2684438	SPL is now shipping 4 pieces of rubber with the bushings to install between the bushing and body to stop the squeaking, and transfer of noise if you want to. JARblue likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-23-2018, 03:16 PM	#24 (permalink)
B&W_Evader Track Member Join Date: Aug 2011 Location: CA Posts: 972 Drives: slower than before Rep Power: 387	So I went ahead and got the collars. Only $150 and supposedly not to big of a job to drop them in. You guys with them experience any squeaking? I'm debating on whether to grease them up or not. __________________ \|RIP\|6spd-sport\|OSG-LSD\|XP8\|RBF600\|Eibach Sways\|RE-71R\|FI-34Row\|Gen3-CAI\|Yaw P.S.\|

02-12-2018, 11:08 AM	#28 (permalink)
JLarson A True Z Fanatic Join Date: Jun 2017 Location: Media, PA Posts: 4,074 Drives: 14 Nissan 370z MR M6 Rep Power: 2684370	Video is fine, but not helpful for doing the actual work, besides giving you a general idea of what you'll be working on. Rusty and Tractionless like this. __________________ 2014 370z Touring Sport Magma Red MT // BP Single Turbo 6467 // 63mm TB's // Z1 Ported Upper Mani // RJM Pedal // Zspeed Stage 3 Clutch // 526 WHP, 451 WTQ 2006 350z (Sold) // 1990 300zx (Sold) // 1985 300zx 2+2 (Sold)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Whiteline rear differential bushings	FortuneLSX-TT	DIY Section (Do-It-Yourself)	53	04-18-2024 12:04 PM
Any one use Z1 rear diff bushings tool	wideglideleon	Brakes & Suspension	9	07-31-2017 03:28 PM
[FOR SALE] SPL rear UCA bushings	Vrg37s	Parts for sale (Private Classifieds)	6	03-12-2015 10:21 AM
Just scored SPL rear knuckle bushings!	synolimit	Brakes & Suspension	17	01-31-2015 09:44 AM
SPL Rear knuckle monoball bushings	binary0x01	Brakes & Suspension	11	09-04-2014 03:11 AM

01-26-2018, 08:15 PM	#27 (permalink)
El Zombo Base Member Join Date: Nov 2017 Location: VA Posts: 21 Drives: 2014 370 White MT Rep Power: 8	https://www.youtube.com/watch?v=ToGqZ_ZVd1I Z1 Collar Bushing video (5 minute video).