After installing lowering springs ---

TipsZ · 12-15-2009, 03:42 PM

After installing Eibach lowering springs, should I get an all wheel alignment again? Also, are their any adjustments that are needed, such as toe-in or toe-out required?

Thanks in advance for sharing your expert knowledge.

ChrisSlicks · 12-15-2009, 04:07 PM

Quote:

Originally Posted by TipsZ

After installing Eibach lowering springs, should I get an all wheel alignment again? Also, are their any adjustments that are needed, such as toe-in or toe-out required?

Thanks in advance for sharing your expert knowledge.

Yes, lowering the car will effect camber and toe. The front camber is not adjustable, so either accept and enjoy, or get the adjustable upper control arms from SPC. The rear is fully adjustable but you may run out of toe adjustment. There is plenty of toe adjustment on the front.

GT Motoring · 12-15-2009, 04:36 PM

Yes, definitely get an alignment to correct the toe. Unless you dropped like 3" the added camber should be just fine and make the car handle better.

TipsZ · 12-15-2009, 04:48 PM

Thanks for the advice. So should an all wheel alignment from the shop get things in order? I have the Eibach kit that lowers the front by .9 inches and the rear by .8 inches. I've heard that I should wait a month or two for it to "settle" before getting the alignment. Lastly, should I look into getting adjustable upper control arms? I do not plan to track the car on a regular basis. Maybe once or twice a year at most. If I do decide to pick up the control arms, how much should that set me back?

Thanks again for the quick response / advice.

ChrisSlicks · 12-15-2009, 04:58 PM

The arms aren't cheap, somewhere under $400 shipped. Installation should be $60-$100 at a suspension shop.

With a 1" drop the camber shouldn't be too wacked. Get a 4-wheel alignment and if the front is beyond -1.6 then you can consider getting the camber adjustable arms if you do a lot of miles. I have -2.5 dialed into mine and love it, but then again I only get about 6-8k miles out of my front tires as they see lots of auto-x.

TipsZ · 12-16-2009, 09:16 AM

So should I let the springs "settle" for a month or so prior to getting the alignment, or can I have the alignment done the minute they are installed?

bigaudiofanat · 12-16-2009, 09:43 AM

The longer you wait the more unnecessary wear on the tires.

Modshack · 12-16-2009, 12:28 PM

Quote:

Originally Posted by TipsZ

So should I let the springs "settle" for a month or so prior to getting the alignment, or can I have the alignment done the minute they are installed?

A few hundred miles oughta do it.

chuckd05 · 12-16-2009, 02:16 PM

i installed those springs in my car, and my rear camber is def out more than i would like it to be...

do you think there is enough adjustment to not get rear camber arms ? Or should i pick up a set of Ichiba Camber Arms ?

ctzn · 12-16-2009, 02:30 PM

I am having mine installed as I type this, I am having them align and slightly tweak the camber in back right as they install so I hope the "settling" doesn't throw things out of whack.

ctzn · 12-16-2009, 05:24 PM

on a side note...

How many hours should it take a competent mechanic to install the set of springs? I was quoted at 6 hours which sounded a bit high to me (especially at over $100/hr)

Josh@STILLEN · 12-16-2009, 05:31 PM

We charge 2.5hrs for a full set of springs.. Keep looking..

EDIT: Sounds like you agreed to that.. That's way too much.. Coilovers are 4 hrs..

ctzn · 12-16-2009, 05:40 PM

Quote:

Originally Posted by Josh@STILLEN

We charge 2.5hrs for a full set of springs.. Keep looking..

EDIT: Sounds like you agreed to that.. That's way too much.. Coilovers are 4 hrs..

Holy sh*t thanks for the heads up, I am going to walk down there right now and mention this to them...

*After walking down there they guy didn't seem to believe that it could take less than 3hrs, though he said if it takes less time he will not bill me for the extra time. So hopefully it will only take them 3hrs once they start...

Josh@STILLEN · 12-16-2009, 05:56 PM

3 hrs.. Ok, maybe if they don't do them a lot I get it, but that's not your fault either if that's the case. This is as standard as it gets.

ctzn · 12-16-2009, 06:23 PM

Quote:

Originally Posted by Josh@STILLEN

3 hrs.. Ok, maybe if they don't do them a lot I get it, but that's not your fault either if that's the case. This is as standard as it gets.

That's good to know, thanks much Josh. Too bad I'm not in SoCal, I would drop my car off with you for a week...

12-15-2009, 03:42 PM	#1 (permalink)
TipsZ Track Member Join Date: Mar 2009 Location: Lithia, FL Age: 51 Posts: 552 Drives: 09 Nissan 370z CS M6 Rep Power: 186	After installing lowering springs --- After installing Eibach lowering springs, should I get an all wheel alignment again? Also, are their any adjustments that are needed, such as toe-in or toe-out required? Thanks in advance for sharing your expert knowledge. __________________ Dynojet 285 HP/245 TQ (pre CBE)// Agency Power CBE // GTM Test Pipes // JWT Pop Chargers // B&M Short Shifter // Eibach Springs // Powder-coated Akebono's // Powder-coated Strut Bar // Black Chromed 19" Rays // // Redline Designs Graphics TipsZ journal

12-15-2009, 04:36 PM	#3 (permalink)
GT Motoring Enthusiast Member Join Date: Nov 2008 Location: Chicago Burbs Posts: 489 Drives: R35 Rep Power: 840	Yes, definitely get an alignment to correct the toe. Unless you dropped like 3" the added camber should be just fine and make the car handle better. __________________ http://www.gtmotoring.com/images/for...r-nagtroc1.gif Zele Authorized USA Dealer Amuse Authorized Distributor 370Z Purchasing Special through GT Motoring www.gtmotoring.com

12-15-2009, 04:48 PM	#4 (permalink)
TipsZ Track Member Join Date: Mar 2009 Location: Lithia, FL Age: 51 Posts: 552 Drives: 09 Nissan 370z CS M6 Rep Power: 186	Thanks for the advice. So should an all wheel alignment from the shop get things in order? I have the Eibach kit that lowers the front by .9 inches and the rear by .8 inches. I've heard that I should wait a month or two for it to "settle" before getting the alignment. Lastly, should I look into getting adjustable upper control arms? I do not plan to track the car on a regular basis. Maybe once or twice a year at most. If I do decide to pick up the control arms, how much should that set me back? Thanks again for the quick response / advice. __________________ Dynojet 285 HP/245 TQ (pre CBE)// Agency Power CBE // GTM Test Pipes // JWT Pop Chargers // B&M Short Shifter // Eibach Springs // Powder-coated Akebono's // Powder-coated Strut Bar // Black Chromed 19" Rays // // Redline Designs Graphics TipsZ journal

12-16-2009, 09:16 AM	#6 (permalink)
TipsZ Track Member Join Date: Mar 2009 Location: Lithia, FL Age: 51 Posts: 552 Drives: 09 Nissan 370z CS M6 Rep Power: 186	So should I let the springs "settle" for a month or so prior to getting the alignment, or can I have the alignment done the minute they are installed? __________________ Dynojet 285 HP/245 TQ (pre CBE)// Agency Power CBE // GTM Test Pipes // JWT Pop Chargers // B&M Short Shifter // Eibach Springs // Powder-coated Akebono's // Powder-coated Strut Bar // Black Chromed 19" Rays // // Redline Designs Graphics TipsZ journal

12-16-2009, 09:43 AM	#7 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	The longer you wait the more unnecessary wear on the tires. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

12-15-2009, 04:58 PM	#5 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	The arms aren't cheap, somewhere under $400 shipped. Installation should be $60-$100 at a suspension shop. With a 1" drop the camber shouldn't be too wacked. Get a 4-wheel alignment and if the front is beyond -1.6 then you can consider getting the camber adjustable arms if you do a lot of miles. I have -2.5 dialed into mine and love it, but then again I only get about 6-8k miles out of my front tires as they see lots of auto-x.

12-16-2009, 02:16 PM	#9 (permalink)
chuckd05 A True Z Fanatic Join Date: Oct 2009 Location: NY Posts: 2,391 Drives: No longer a Z Rep Power: 20	i installed those springs in my car, and my rear camber is def out more than i would like it to be... do you think there is enough adjustment to not get rear camber arms ? Or should i pick up a set of Ichiba Camber Arms ? __________________ 09 370Z 6M PW - FBO Best 1/4 mile = 12.926 @ 109 SOLD -- 08 BMW 135i - FBO 12.1@120mph SOLD -- white 09 e92 335 Coupe Mtech - 11.9 @ 119 :-)

12-16-2009, 02:30 PM	#10 (permalink)
ctzn inquisitive Join Date: Nov 2008 Location: Back in Midwest, StL Posts: 384 Drives: G35 Rep Power: 17	I am having mine installed as I type this, I am having them align and slightly tweak the camber in back right as they install so I hope the "settling" doesn't throw things out of whack.

12-16-2009, 05:24 PM	#11 (permalink)
ctzn inquisitive Join Date: Nov 2008 Location: Back in Midwest, StL Posts: 384 Drives: G35 Rep Power: 17	on a side note... How many hours should it take a competent mechanic to install the set of springs? I was quoted at 6 hours which sounded a bit high to me (especially at over $100/hr)

12-16-2009, 05:31 PM	#12 (permalink)
Josh@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Costa Mesa, CA Posts: 1,197 Drives: 2004 G35 Coupe 6MT Rep Power: 533	We charge 2.5hrs for a full set of springs.. Keep looking.. EDIT: Sounds like you agreed to that.. That's way too much.. Coilovers are 4 hrs..

12-16-2009, 05:56 PM	#14 (permalink)
Josh@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Costa Mesa, CA Posts: 1,197 Drives: 2004 G35 Coupe 6MT Rep Power: 533	3 hrs.. Ok, maybe if they don't do them a lot I get it, but that's not your fault either if that's the case. This is as standard as it gets.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TEIN S TECH Lowering Springs Now Available from ECS Motorsports \| FREE S&H!	AJ@ECSMotorsports	Suspension/Brakes	57	03-10-2014 12:30 PM
I need Help installing springs	Dreamin'Z	Brakes & Suspension	11	10-15-2009 01:25 PM
370z lowering springs on sale now	ERZperformance	ERZperformance	0	06-25-2009 05:18 AM
Update pics of Eibach lowering springs	DJcuetip	Brakes & Suspension	38	04-25-2009 12:59 AM