Coilover cup kits

ufoz8mycow · 05-29-2017, 12:39 AM

How many of you are running some kind of air cup setup on your coilovers? Are you running them on a daily driver? How long have you had them? Please share your setup and experience!

Thanks

OptionZero · 05-29-2017, 12:58 AM

I believe North Style has some

Liquid G used to have the Umbrella VRH kit before he went full air, he had a thread about them

I've also heard good things about the Aragosta kit, made by Roberuta

NorthStyle · 05-29-2017, 07:34 AM

That's correct... I have the Stance USA cup kit (fronts only). I only drive my car during the Spring and Summer so I don't really consider it a "daily driver", but I put about 4-5k miles on it annually during those months.

I've had the kit installed for a little over a year, and have mostly positive things to say about it: extremely useful for steep inclines and/or speedbumps, I haven't had to mess with the compressor/tank/lines since finishing install, and the tank is small enough to fit in most tight spaces.

However, I did have issues with initial setup (everything was wired incorrectly, so I had to contact Stance and have them send me a diagram of how it "should" have been and I fixed it based off of that). Also, I believe my air solenoid is on its way out as lately on days above +/- 60 degrees it will stick open and not want to raise the car unless I toggle the switch back/forth a few times. Beyond that, the sway bar will need to be greased more often, making sure the tank is emptied every now and then, and I've had to replace my endlinks already (I'll be switching to SPL eventually).

05-29-2017, 12:39 AM	#1 (permalink)
ufoz8mycow Track Member Join Date: Mar 2012 Location: Vegas Posts: 536 Drives: Black Cherry '12 Z Rep Power: 16	Coilover cup kits How many of you are running some kind of air cup setup on your coilovers? Are you running them on a daily driver? How long have you had them? Please share your setup and experience! Thanks

05-29-2017, 12:58 AM	#2 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,235 Drives: 15 370Z Nismo 6MT Rep Power: 214100	I believe North Style has some Liquid G used to have the Umbrella VRH kit before he went full air, he had a thread about them I've also heard good things about the Aragosta kit, made by Roberuta __________________ OptionZero Build Thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Get your Coilover Kits, Springs & Shocks Nissan for 370z @JCEAutoParts,Free Shipping!	JCEAutoParts	Suspension/Brakes	108	08-10-2015 02:46 PM
M7 Coilover, BC Coilover, KW Coilover, Tein Coilover (We got what you need!)	Source,LLC	Suspension/Brakes	380	07-02-2014 05:28 PM
KW Variant 1 and 3 Coilover Kits INSTOCK and on SALE at Imported Performance	Imported Performance	Suspension/Brakes	388	10-25-2011 05:56 PM
Official 370z Body Kits/Lip Kits Thread	Notsud 13	Exterior & Interior	9	10-21-2011 01:58 PM

05-29-2017, 07:34 AM	#3 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,259 Drives: 2011 370Z Nismo Rep Power: 24277	That's correct... I have the Stance USA cup kit (fronts only). I only drive my car during the Spring and Summer so I don't really consider it a "daily driver", but I put about 4-5k miles on it annually during those months. I've had the kit installed for a little over a year, and have mostly positive things to say about it: extremely useful for steep inclines and/or speedbumps, I haven't had to mess with the compressor/tank/lines since finishing install, and the tank is small enough to fit in most tight spaces. However, I did have issues with initial setup (everything was wired incorrectly, so I had to contact Stance and have them send me a diagram of how it "should" have been and I fixed it based off of that). Also, I believe my air solenoid is on its way out as lately on days above +/- 60 degrees it will stick open and not want to raise the car unless I toggle the switch back/forth a few times. Beyond that, the sway bar will need to be greased more often, making sure the tank is emptied every now and then, and I've had to replace my endlinks already (I'll be switching to SPL eventually).