Need help swift suspension

Sharpinou · 03-10-2017, 02:53 AM

Hi Everyone

Currently installing my new Swift springs but...got a problem, my front suspension dosent align properly so I can't fit the bottom bolt? Any idea?

Both upper and lower tip of the spring align in the proper groove so I don't know why it dosen't fit???? Is my rubber at the top? Bottom cannot be better align than that. ???

Tks

pitser73 · 03-10-2017, 02:27 PM

You're top hat is not put on in the right orientation. It needs to be offset to 35.4 degrees ...let me find the service manual picture for you, give me a second

pitser73 · 03-10-2017, 02:31 PM

See the attached image

Senna-F1 · 03-10-2017, 09:04 PM

Is the rubber positioned correctly? Indentations for the bolt heads as shown here. IMG_6595.JPG

Sent from my iPhone using Tapatalk

Sharpinou · 03-13-2017, 11:02 AM

I put the spring perflectly in place at the bottom and there gas a gap of 1in at the top in the rubber pad. I have desassemble and reinstalled everything in place with a gap of 1/2in at the top and bottom and the spring took is place. I was not able to have a perfect fit at the top and at the bottom like your picture Senna. The spring I think was cut too short a little bit. :/

03-10-2017, 02:27 PM	#2 (permalink)
pitser73 Base Member Join Date: Feb 2017 Location: WA Posts: 86 Drives: '14 370z Nismo Rep Power: 8	You're top hat is not put on in the right orientation. It needs to be offset to 35.4 degrees ...let me find the service manual picture for you, give me a second Last edited by pitser73; 03-10-2017 at 02:32 PM. Reason: like 0.2 degrees matters

03-10-2017, 09:04 PM	#4 (permalink)
Senna-F1 Enthusiast Member Join Date: Jun 2016 Location: Cary, NC Age: 54 Posts: 425 Drives: 370SC,EliseSC,MR2T Rep Power: 50	Is the rubber positioned correctly? Indentations for the bolt heads as shown here. IMG_6595.JPG Sent from my iPhone using Tapatalk __________________ 618 WHP.452 WTQ.4" Python Intake.15 psi.e50.Topgunz SC.SOHO Tune.S1SE.STG 4 Clutch.Motordyne LTH/Test Pipes/Exhaust.485 Pump.1050x

03-13-2017, 11:02 AM	#5 (permalink)
Sharpinou Base Member Join Date: Feb 2017 Location: Toronto Posts: 15 Drives: 370z monterey blue Rep Power: 8	I put the spring perflectly in place at the bottom and there gas a gap of 1in at the top in the rubber pad. I have desassemble and reinstalled everything in place with a gap of 1/2in at the top and bottom and the spring took is place. I was not able to have a perfect fit at the top and at the bottom like your picture Senna. The spring I think was cut too short a little bit. :/ Last edited by Sharpinou; 03-13-2017 at 11:07 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kami Speeds SUSPENSION SHOP Swift\|SPC\|BCRacing\|SPL\|FA\|Whiteline	KamiSpeed	Suspension/Brakes	280	12-07-2016 05:19 PM
[FOR SALE] Nismo OEM Suspension w/Swift springs	bb370z	Parts for sale (Private Classifieds)	14	09-22-2015 12:58 PM
Your Suspension Source!! Stance\|Swift\|Fortune\|KW\|Tein\|Tanabe\|etc	vividracing	Suspension/Brakes	21	02-13-2015 11:04 AM
*SSSSummer Suspension Sale** BC, KW, Stance, Tein, Swift, H&R and More!!!	NuGen Auto	Suspension/Brakes	116	12-08-2014 12:46 PM
The ultimate suspension package deal!! (incl. Swift Springs, SPC, Koni, & Whiteline)	KamiSpeed	Suspension/Brakes	51	11-03-2014 12:55 PM