BC Coilovers Question

teggy · 12-02-2016, 06:44 PM

or nm i think i figured it out.. someone confirm this for me. so the actual shock is what holds the preload and the adjustment it done by the spring in the rear so you can make adjustment in the rear without losing the preload.

Jhill · 12-03-2016, 12:15 AM

Quote:

Originally Posted by teggy

simple question so you can adjust the front without having too touch the preload again, but the back anytime you make an adjustment the preload has too be adjusted again?

Right. The rear you have to adjust the spring seat and then the shock length after you set your spring, that's the downside of oem type.

Fairlady_Zeto · 12-03-2016, 12:55 PM

Quote:

Originally Posted by Jhill

Hmm looks like I need to add a little preload to my rear on my powertrix. Been feeling good but just a slight bit of noise over speed bumps. I just threaded the shock bodies up until all spring play was gone but didn't actually preload it and I too am a bit lower than I had anticipated for how high I set the collars (also not exactly even side to side). Going to do one more final adjustment Sunday before track event on Monday. Going to be a little harder to measure my exact spring compression since it still uses the oem seat but I'll get it close.

Yeah it made a world of difference after everything was done. I measured from where the spring seat comes in contact with the perch up to the top of the spring then preloaded up 8mm using the jack (BC recommends 7-10)

Fairlady_Zeto · 12-03-2016, 12:59 PM

Quote:

Originally Posted by teggy

or nm i think i figured it out.. someone confirm this for me. so the actual shock is what holds the preload and the adjustment it done by the spring in the rear so you can make adjustment in the rear without losing the preload.

Yes exactly and the pita part is that each and every time you make an adjustment to the spring in either direction you also have to go back in and reset the preload. It took me three or four tries to get everything where i wanted in the rear. Fronts are easy because they are indeed preloaded from the factory youre just adjusting the lower locking rings and twisting the shock body up or down.

teggy · 12-03-2016, 01:35 PM

that does sound like a pain then, hope i get it first try was just going too go half way in the rear then hope that low enough lol

Fairlady_Zeto · 12-03-2016, 02:25 PM

Quote:

Originally Posted by teggy

that does sound like a pain then, hope i get it first try was just going too go half way in the rear then hope that low enough lol

Its not hard it just takes time. I personally would start by lowering it a quarter then seeing where it is. Mine was quite low already at a quarter of the way and then i raised it from there. Good luck

teggy · 12-03-2016, 06:44 PM

yea i was going too start of by lowering half way but maybe that too much too start lol i just want too lose the wheel gap

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Question about Ohlins DFV Coilovers	leonz5	Brakes & Suspension	39	09-06-2017 12:40 PM
Coilovers Question	SoCalZ34	Brakes & Suspension	2	10-05-2016 01:56 PM
Super stupid question about coilovers	Ryan998	Brakes & Suspension	5	09-06-2016 02:25 PM
[FOR SALE] Aragosta Type S Coilovers, Koni Coilovers, Trans Cooler, Hotchkis Sways, Stillen HFC	dimsler	Parts for sale (Private Classifieds)	37	05-13-2014 11:34 AM
Question about KW V3 Coilovers	VolcanoG07	Brakes & Suspension	8	01-03-2012 12:32 PM

12-02-2016, 06:44 PM	#16 (permalink)
teggy Base Member Join Date: Mar 2012 Location: canada Posts: 126 Drives: 06 350z track Rep Power: 13	or nm i think i figured it out.. someone confirm this for me. so the actual shock is what holds the preload and the adjustment it done by the spring in the rear so you can make adjustment in the rear without losing the preload.

12-03-2016, 01:35 PM	#20 (permalink)
teggy Base Member Join Date: Mar 2012 Location: canada Posts: 126 Drives: 06 350z track Rep Power: 13	that does sound like a pain then, hope i get it first try was just going too go half way in the rear then hope that low enough lol

12-03-2016, 06:44 PM	#22 (permalink)
teggy Base Member Join Date: Mar 2012 Location: canada Posts: 126 Drives: 06 350z track Rep Power: 13	yea i was going too start of by lowering half way but maybe that too much too start lol i just want too lose the wheel gap