Loose clutch petal

Zbrah · 11-17-2016, 09:10 AM

You got that warranty in writing? If not, demand for one!

JARblue · 11-17-2016, 09:28 AM

Quote:

Originally Posted by Billibob22

They are replacing everything I elected to stick to Nissan

Why on earth would you do that? Did you not read anything about the CSC on this forum? As Chuck said, OEM crap is what put you in this position in the first place

Quote:

Originally Posted by Billibob22

My hope is that this thread will help anyone who is new to the Z and needs to know what to possibly expect... stay tuned. :-)

Putting OEM garbage back in your car is not the way to do this. There's enough information on this forum already that anyone who has even done a cursory search knows how shitty the OEM CSC is and what to expect: failure at any random time.

Quote:

Originally Posted by Billibob22

Where would I go and how would I do that?

Joe @ ZSpeed ... give him a call, tell him what kind of driving you do and what your priorities are regarding the clutch action, and he will set you up with the best kit for you at a great price (including an aftermarket CSC that won't fail on you).

BehindSpace · 11-17-2016, 01:29 PM

Stick with OEM and the warranty brother. Ignore the noise, you dont need to justify your decision to others.

Chuck33079 · 11-17-2016, 02:26 PM

Quote:

Originally Posted by BehindSpace

Stick with OEM and the warranty brother. Ignore the noise, you dont need to justify your decision to others.

This is terrible advice. We're telling him to use cheaper, less failure prone parts. You're telling him to overpay for garbage.

Given that you told people 320 degree oil temps and 10k oil change intervals are ok, maybe you should not be in the advice business.

Zbrah · 11-17-2016, 04:04 PM

Quote:

Originally Posted by BehindSpace

Stick with OEM and the warranty brother. Ignore the noise, you dont need to justify your decision to others.

The oem parts are what gotten him here in the first place

troll

BehindSpace · 11-17-2016, 05:05 PM

Quote:

Originally Posted by Chuck33079

This is terrible advice. We're telling him to use cheaper, less failure prone parts. You're telling him to overpay for garbage.

Given that you told people 320 degree oil temps and 10k oil change intervals are ok, maybe you should not be in the advice business.

I think i give outstanding advise. oil coolers that dont let the oil get to over 212 do more harm than good and limp mode is too low if its at 280 it shud be raised to 320 like other manufacturers, the car needs to go to 212 to 300 every time or its not evaporating the moysture

BehindSpace · 11-17-2016, 05:07 PM

Quote:

Originally Posted by Zbrah

The oem parts are what gotten him here in the first place

troll

i give excellent advise. the aftermarket parts broke also and then they sayd oh you need to replace the master athe same time, then the elimination kit sayd oh you need to adjust it thruout its life to maintain pressure plate clearance as your clutch wears down. i pick oem with warranty!

BehindSpace · 11-17-2016, 05:09 PM

advice not advise

Billibob22 · 11-17-2016, 05:18 PM

Quote:

Originally Posted by BehindSpace

Stick with OEM and the warranty brother. Ignore the noise, you dont need to justify your decision to others.

Thanks for that
I am in Madera, Ca.
I cannot drive all over this state trying to find someone to do this work
Also, I was just notified today that half of all these repairs will be covered...
Change that to 1,690$
:-)

Zbrah · 11-17-2016, 05:23 PM

Quote:

Originally Posted by Billibob22

Thanks for that
I am in Madera, Ca.
I cannot drive all over this state trying to find someone to do this work
Also, I was just notified today that half of all these repairs will be covered...
Change that to 1,690$
:-)

It's your money. Do as you wish but I highly suggest you get that warranty in writing if not done so already. You're going to need it.

Billibob22 · 11-17-2016, 09:41 PM

I will
I will post it tomorrow
Thanks for the half full glass :-)
I love this 40th and will continue to restore it. The rims are next !

Zbrah · 11-17-2016, 10:21 PM

Quote:

Originally Posted by Billibob22

I will
I will post it tomorrow
Thanks for the half full glass :-)
I love this 40th and will continue to restore it. The rims are next !

Don't bother man. No one care for your little warranty. If you can't see people were trying to help you with sound advice then don't come posting here seeking for help.

Billibob22 · 11-17-2016, 10:55 PM

Such a happy guy... can you please excuse yourself from my thread.... thank you.

Sent from my iPad using Tapatalk

Rusty · 11-17-2016, 11:06 PM

Quote:

Originally Posted by Billibob22

$3,380
I went ahead and replaced the whole thing
Guaranteed 3 years 50,000
I'll have it back Thursday

I took the car to San Fran the first Friday of this month to a meeting...
I got to Pleasanton and it went to the floor.
I was prepared
I continued to pump and pull the clutch off of the floor until I got there...
On the drive home same thing
Repeated the pumping and pulling off of the floor with moments of pressure in between...
Got it home
Replaced fluid
Got through about a week with pressure
Took it to the appointment this last Saturday
Pressure tested no good in both master and slave
Pedal on floor by now, completely failed
We will see Thursday!

Sent from my iPad using Tapatalk

Quote:

Originally Posted by Billibob22

Thanks for that
I am in Madera, Ca.
I cannot drive all over this state trying to find someone to do this work
Also, I was just notified today that half of all these repairs will be covered...
Change that to 1,690$
:-)

Christ. They are butt raping you big time!

You got a warranty that's crap! Shouldn't have to pay another $1690.

You was given good advice, but didn't take it. It's your money.

Jsolo · 11-17-2016, 11:07 PM

The only way I can see replacing these parts with oem is if it's all covered under warranty. Or perhaps a deductible ($100) if covered under the extended warranty. Otherwise, replace the nissan garbage with something else.

11-17-2016, 09:10 AM	#46 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	You got that warranty in writing? If not, demand for one! __________________

11-17-2016, 09:41 PM	#56 (permalink)
Billibob22 Base Member Join Date: Jun 2015 Location: California Posts: 103 Drives: 40th Anniversary#365 Rep Power: 10	I will I will post it tomorrow Thanks for the half full glass :-) I love this 40th and will continue to restore it. The rims are next ! __________________

11-17-2016, 10:55 PM	#58 (permalink)
Billibob22 Base Member Join Date: Jun 2015 Location: California Posts: 103 Drives: 40th Anniversary#365 Rep Power: 10	Such a happy guy... can you please excuse yourself from my thread.... thank you. Sent from my iPad using Tapatalk __________________

11-17-2016, 11:07 PM	#60 (permalink)
Jsolo Track Member Join Date: Dec 2011 Location: chicago Posts: 783 Drives: '12 G37 6MT Rep Power: 14	The only way I can see replacing these parts with oem is if it's all covered under warranty. Or perhaps a deductible ($100) if covered under the extended warranty. Otherwise, replace the nissan garbage with something else. Rusty likes this. __________________ G37S Sedan 6MT, Eibach swaybars, Invidia Exhaust, Weaker Clutch Pedal Spring For sale links

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] RJM Clutch Pedal System for 370Z - Fully Customizable Clutch Feel & Stroke RJM Clutch	law2004	Parts for sale (Private Classifieds)	8	11-15-2015 08:45 PM
GT//Monsters Clutch Kits Flywheel Shop - Clutch Master \|\| Competition Clutch \|\| SPEC	gtmonsters	Drivetrain/Engine	189	10-31-2015 12:41 AM
Clutch engagement for turning car on? And a loose rear bumper lol	NefariousZ34	Nismo 370Z	5	06-17-2015 11:15 AM
[WTB] Wtb: NST pulley kit (+belt), RJM AFP clutch petal, etc.	VQ370ZTT	Parts for sale (Private Classifieds)	0	07-10-2014 10:32 PM
Clutch stuck X1 & Loose of feel in cold weather	Troyz	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	26	02-18-2014 10:37 AM

11-17-2016, 01:29 PM	#48 (permalink)
BehindSpace Base Member Join Date: Feb 2015 Location: Orlando, FL Posts: 83 Drives: 2014 Evo X MR Rep Power: 85	Stick with OEM and the warranty brother. Ignore the noise, you dont need to justify your decision to others.

11-17-2016, 05:09 PM	#53 (permalink)
BehindSpace Base Member Join Date: Feb 2015 Location: Orlando, FL Posts: 83 Drives: 2014 Evo X MR Rep Power: 85	advice not advise