305 rear tire camber?

TBatt · 02-19-2016, 03:58 PM

After doing tons of research I'm planning on new wheels and tires and have decided to go with 19x9.5 +20 with 265/35/19 tires on the front and 19x11 +18 with 305/30/19 on the rear. I've seen several cars with this setup and it looks killer. I do not plan on lowering the car because I have already had encounters with dips in the roads at stock height.

With that wide of a rear tire should I also change the camber setting to get a little flatter stance to reduce inside tire wear?

If so, will the stock suspension allow enough adjustment range or will I also need rear camber arms?

Thanks for your opinion. Great forum!

FPenvy · 02-19-2016, 04:16 PM

Quote:

Originally Posted by TBatt

After doing tons of research I'm planning on new wheels and tires and have decided to go with 19x9.5 +20 with 265/35/19 tires on the front and 19x11 +18 with 305/30/19 on the rear. I've seen several cars with this setup and it looks killer. I do not plan on lowering the car because I have already had encounters with dips in the roads at stock height.

With that wide of a rear tire should I also change the camber setting to get a little flatter stance to reduce inside tire wear?

If so, will the stock suspension allow enough adjustment range or will I also need rear camber arms?

Thanks for your opinion. Great forum!

not sure how the offset will change it but on my car with stock sport rays and stock suspension i run 305's without change to alignment. that alone took out probably 75% or more of the awful inside tire wear that i saw on my 275 tires.

Rusty · 02-19-2016, 06:37 PM

My camber is -1.75 with the 345's. you could do -1.25 to -1.5 and be fine.

DEpointfive0 · 02-19-2016, 11:02 PM

You could do 0 camber and be fine, you ideally want to be around .5-1.5

I'm at 0, I love it

TBatt · 02-22-2016, 03:02 PM

Thanks for the info!

Gotta' love this forum!

osbornsm · 02-22-2016, 04:37 PM

Quote:

Originally Posted by DEpointfive0

You could do 0 camber and be fine, you ideally want to be around .5-1.5

I'm at 0, I love it

You have NO rear camber???

- How's that corner??

DEpointfive0 · 02-22-2016, 10:20 PM

Quote:

Originally Posted by osbornsm

You have NO rear camber???

- How's that corner??

Fantastic, have you seen how much the 370Z squats while on the power?

DEpointfive0 · 02-22-2016, 10:37 PM

And truthfully I'm at -.5

FPenvy · 02-23-2016, 12:16 AM

Quote:

Originally Posted by DEpointfive0

Fantastic, have you seen how much the 370Z squats while on the power?

I have a pic somewhere of mine at the drag strip. Bitch gets low on launch lol

FPenvy · 02-23-2016, 12:17 AM

Found it lol

DEpointfive0 · 02-23-2016, 12:22 AM

****, that's a 2" drop at least

DEpointfive0 · 02-23-2016, 12:23 AM

And look, half your tire is off the ground, lol

FPenvy · 02-23-2016, 12:28 AM

Quote:

Originally Posted by DEpointfive0

****, that's a 2" drop at least

That is stock suspension/alignment and 275 rears. Need a new pic with the 305s and see the difference.

DEpointfive0 · 02-23-2016, 12:33 AM

Quote:

Originally Posted by FPenvy

That is stock suspension/alignment and 275 rears. Need a new pic with the 305s and see the difference.

305 will make it worse, lol

I think the car handles just fine with my 7.5 degrees of caster and close to no rear camber, lol

FPenvy · 02-23-2016, 08:44 AM

Quote:

Originally Posted by DEpointfive0

305 will make it worse, lol

I think the car handles just fine with my 7.5 degrees of caster and close to no rear camber, lol

but..........305s are so much better lol

02-19-2016, 03:58 PM	#1 (permalink)
TBatt Track Member Join Date: Apr 2013 Location: Huntsville, AL Posts: 832 Drives: 2019 GT-R Rep Power: 20168	305 rear tire camber? After doing tons of research I'm planning on new wheels and tires and have decided to go with 19x9.5 +20 with 265/35/19 tires on the front and 19x11 +18 with 305/30/19 on the rear. I've seen several cars with this setup and it looks killer. I do not plan on lowering the car because I have already had encounters with dips in the roads at stock height. With that wide of a rear tire should I also change the camber setting to get a little flatter stance to reduce inside tire wear? If so, will the stock suspension allow enough adjustment range or will I also need rear camber arms? Thanks for your opinion. Great forum! __________________ RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

02-19-2016, 06:37 PM	#3 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,190 Drives: 2011 Nismo GM 6M Rep Power: 2684437	My camber is -1.75 with the 345's. you could do -1.25 to -1.5 and be fine. 09'370z likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

02-19-2016, 11:02 PM	#4 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	You could do 0 camber and be fine, you ideally want to be around .5-1.5 I'm at 0, I love it __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

02-22-2016, 03:02 PM	#5 (permalink)
TBatt Track Member Join Date: Apr 2013 Location: Huntsville, AL Posts: 832 Drives: 2019 GT-R Rep Power: 20168	Thanks for the info! Gotta' love this forum! DEpointfive0 likes this. __________________ RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

02-22-2016, 10:37 PM	#8 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	And truthfully I'm at -.5 __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

02-23-2016, 12:22 AM	#11 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	**, that's a 2" drop at least __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide )** NSFW due to language:

02-23-2016, 12:23 AM	#12 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	And look, half your tire is off the ground, lol __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camber and tire wear question	JCarter	Wheels & Tires	8	11-10-2014 01:42 AM
[FOR SALE] Spl rear camber arms, with toe bolts and ams rear traction bars	TOPHER9425	Parts for sale (Private Classifieds)	1	08-19-2014 07:59 AM
[FOR SALE] SPC Front and Rear Camber Arms With Rear Toe Bolts G37/370Z	Akrobatik	Parts for sale (Private Classifieds)	13	07-05-2013 05:30 PM
[WTB] SPC Front and Rear Camber Arms Package With Rear Toe Bolts	scruffydog	Parts for sale (Private Classifieds)	2	07-12-2012 06:10 PM
Front Camber vs. Rear Camber	osbornsm	Brakes & Suspension	2	02-21-2012 05:12 PM