Suspension Upgrade for DD

TerribleONE · 01-26-2016, 12:38 PM

Quote:

Originally Posted by littlejuanito

Seems that the general consensus is to run a front sway bar only. Would a Whiteline bar set on stiffest setting be good enough for a street car?

That's what I am running and it made a huge difference

kenchan · 01-26-2016, 12:42 PM

Quote:

Originally Posted by Hotrodz

I only use the front bar set to full stiff, cause that's the way she like it and my stock Nismo bar in the rear.

Sent from my SM-N910P using Tapatalk

do u run aftermarket endlinks on the front?

kenchan · 01-26-2016, 12:43 PM

Quote:

Originally Posted by TerribleONE

That's what I am running and it made a huge difference

or do u run aftermarket endlinks on the front?

Hotrodz · 01-26-2016, 12:44 PM

Yup...SPL

Sent from my SM-N910P using Tapatalk

littlejuanito · 01-26-2016, 12:46 PM

Quote:

Originally Posted by kenchan

or do u run aftermarket endlinks on the front?

Are those recommended as well on that specific setup?

chopin_guy88 · 01-26-2016, 12:46 PM

Holy smokes that took off quick -- so, if I may, why the recommendations against struts/springs/coilovers? Just interested to understand the motivation in recommending them over the two options I'm considering?

kenchan · 01-26-2016, 12:47 PM

Quote:

Originally Posted by Hotrodz

Yup...SPL

Sent from my SM-N910P using Tapatalk

cool, thanks.

Quote:

Originally Posted by littlejuanito

Are those recommended as well on that specific setup?

yah, the factory ones can only handle so much. no issue on my kangaroo bar in the softer setting though (approx 30%+ stiffer vs stock)

kenchan · 01-26-2016, 12:49 PM

Quote:

Originally Posted by chopin_guy88

Holy smokes that took off quick -- so, if I may, why the recommendations against struts/springs/coilovers? Just interested to understand the motivation in recommending them over the two options I'm considering?

for me the car drives fine. it just needed a stiffer front stabilizer. rest of my sus is stock, besides the nismo wheels and RE11's. nismo wheels fit the base body perfectly with no lowering or spacers needed.

my dress up car (G35C) runs lowering springs/adjustable dampers/swaybar/endlink/camber arms, works, etc. but she is more for show since she is the prettier of the two.

kenchan · 01-26-2016, 12:52 PM

Quote:

Originally Posted by littlejuanito

Seems that the general consensus is to run a front sway bar only. Would a Whiteline bar set on stiffest setting be good enough for a street car?

whiteline's softer setting is perfectly fine imo if u dont want to get endlinks. datz my current setup. so much better than stock for sure.

littlejuanito · 01-26-2016, 12:52 PM

Quote:

Originally Posted by kenchan

for me the car drives fine. it just needed a stiffer front stabilizer. rest of my sus is stock, besides the nismo wheels and RE11's. nismo wheels fit the base body perfectly with no lowering or spacers needed.

my dress up car (G35C) runs lowering springs/adjustable dampers/swaybar/endlink/camber arms, works, etc. but she is more for show since she is the prettier of the two.

I prefer to keep it as stock as possible and if replacing just the front sway bar, is more than enough, I rather go that route. Thanks for your input.

TerribleONE · 01-26-2016, 12:54 PM

Quote:

Originally Posted by chopin_guy88

Holy smokes that took off quick -- so, if I may, why the recommendations against struts/springs/coilovers? Just interested to understand the motivation in recommending them over the two options I'm considering?

More bang for your buck.

kenchan · 01-26-2016, 12:58 PM

Quote:

Originally Posted by littlejuanito

I prefer to keep it as stock as possible and if replacing just the front sway bar, is more than enough, I rather go that route. Thanks for your input.

yah, if u do decide to go the kangaroo bar, make sure you place the metal lock collars perfectly even left/right and no more than 0.5mm between the collar and bushing on both sides. anything more, it can push the bushing out farther and farther until thing slides off.

dont even bother with the bonehead rubber with hose clamp type collars. those dont work at all. i speak from experience.

kenchan · 01-26-2016, 12:59 PM

or just get the stillen set and run just the front. it has welded collars which is how it shouldve come from the factory.

littlejuanito · 01-26-2016, 01:03 PM

Quote:

Originally Posted by kenchan

yah, if u do decide to go the kangaroo bar, make sure you place the metal lock collars perfectly even left/right and no more than 0.5mm between the collar and bushing on both sides. anything more, it can push the bushing out farther and farther until thing slides off.

dont even bother with the bonehead rubber with hose clamp type collars. those dont work at all. i speak from experience.

Great, thanks again. I'd probably take the car to Specialty Z to get this done.

Hotrodz · 01-26-2016, 01:06 PM

Quote:

Originally Posted by chopin_guy88

Holy smokes that took off quick -- so, if I may, why the recommendations against struts/springs/coilovers? Just interested to understand the motivation in recommending them over the two options I'm considering?

It just depends on what you want, but once you start down the road of springs and coils you may need camber arms and other supporting mods. It's all about how much you want to spend and the outcome you are looking for.

Sent from my SM-N910P using Tapatalk

01-26-2016, 12:44 PM	#19 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	Yup...SPL Sent from my SM-N910P using Tapatalk kenchan and hjo1078 like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

01-26-2016, 12:46 PM	#21 (permalink)
chopin_guy88 Base Member Join Date: Aug 2014 Location: Houston Posts: 117 Drives: 2015 Base MagmaRed Rep Power: 11	Holy smokes that took off quick -- so, if I may, why the recommendations against struts/springs/coilovers? Just interested to understand the motivation in recommending them over the two options I'm considering? littlejuanito likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Suspension upgrade recomendation	Red_Z	Brakes & Suspension	6	11-27-2012 02:00 PM
[FOR SALE] Nismo Suspension Upgrade	Daishi	Parts for sale (Private Classifieds)	15	09-15-2011 07:03 PM
Upgrade to Nismo Suspension?	TrackRat	Brakes & Suspension	17	12-07-2010 03:17 PM
Reluctant to upgrade suspension	spearfish25	Brakes & Suspension	26	12-24-2009 09:16 AM

01-26-2016, 12:59 PM	#28 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	or just get the stillen set and run just the front. it has welded collars which is how it shouldve come from the factory.