Wheel Hop

jpit · 11-04-2009, 01:58 PM

Is anyone experiencing wheel hop under very brisk acceleration? Has this been a problem with the 350zs and 370zs?

280z/300zx · 11-04-2009, 02:26 PM

Only time I noticed it was at the track when launching the car. Couldn't get the damn thing to not wheel hop. Then again the Vegas speedway isn't known for having good track prep. On the street with "brisk acceleration" I get mild tire spin (doesn't make a noise at all, just feel the slip).

Mergnthwirker · 11-04-2009, 02:28 PM

Quote:

Originally Posted by jpit

Is anyone experiencing wheel hop under very brisk acceleration? Has this been a problem with the 350zs and 370zs?

No problem here. Do you have the LSD rear? Oh yeah, I see by your sig that you do.

What revs are you running when you drop the clutch?

kannibul · 11-04-2009, 02:45 PM

Quote:

Originally Posted by 280z/300zx

Only time I noticed it was at the track when launching the car. Couldn't get the damn thing to not wheel hop. Then again the Vegas speedway isn't known for having good track prep. On the street with "brisk acceleration" I get mild tire spin (doesn't make a noise at all, just feel the slip).

I get noise and slip, but no marks.

RARELY I'll get marks, like 1 out of however many times I've done it...lol

jpit · 11-04-2009, 02:56 PM

Let the clutch out at about 3500

kannibul · 11-04-2009, 03:03 PM

Quote:

Originally Posted by jpit

Let the clutch out at about 3500

Kind of hard to do that without a clutch.

280z/300zx · 11-04-2009, 04:41 PM

Quote:

Originally Posted by kannibul

I get noise and slip, but no marks.

RARELY I'll get marks, like 1 out of however many times I've done it...lol

See, I can't get my rear to make the infamous tire squeal unless on slippery cement. On nml back top it won't squeal; it either slips with brisk acceleration and if I try to launch it hard it will wheel hop (though not nearly as bad as at the track). The funny thing is that it's the same with our 2000 T/A V8 and our C6 Vette. Yet with my 280z I can squeal all day long if I want. Both my 280z and 370z have limited slips. Oh well, no noise means less attention.

earwicker7 · 11-04-2009, 06:55 PM

Quote:

Originally Posted by 280z/300zx

See, I can't get my rear to make the infamous tire squeal unless on slippery cement. On nml back top it won't squeal; it either slips with brisk acceleration and if I try to launch it hard it will wheel hop (though not nearly as bad as at the track). The funny thing is that it's the same with our 2000 T/A V8 and our C6 Vette. Yet with my 280z I can squeal all day long if I want. Both my 280z and 370z have limited slips. Oh well, no noise means less attention.

I look at it this way... my old 911 wheel hopped, my crappy late 70s Z28 spun the tires like mad.

I can live with wheel hop

ChrisSlicks · 11-04-2009, 09:23 PM

The 350Z and Infiniti's have a wheel hop problem as well when they break traction. The key is to not let wheel spin get out of control.

This is the technique I use at auto-x.

Hold revs at around 3500
Drop clutch
Feather throttle at between 50-75% such that the revs stay between 3-4.5K until you feel the rear hook up.
Floor it!

If the revs get too high while you don't have traction you'll just get monster wheel hop.

mspeasl · 11-04-2009, 09:46 PM

Quote:

Originally Posted by jpit

Is anyone experiencing wheel hop under very brisk acceleration? Has this been a problem with the 350zs and 370zs?

4000 to 4500 rpm's will work wonders...........................

spearfish25 · 11-05-2009, 10:45 AM

If the tires are cold, they spin without noise. Get them heated up a bit and drop the clutch at 3500 = squeal.

JoeyD · 11-05-2009, 02:23 PM

I get wheel hop fairly regularly when pulling out of my drive on cool mornings. It's not really a "problem" more so a compromise you make when having an independent rear suspension and higher HP.

tranceformer · 11-05-2009, 02:37 PM

I've experienced wheel hop in my 350z and a little bit in the 370z. It only seems to happen when I don't give it enough gas, somewhere in that grey area between bogging and spinning the wheels. Sometimes it happens launching at the track, NOT a good feeling.

SPL makes a diff bushing set for the 350z, and according to them the kit also works on the 370z.

John@Z1 · 11-10-2009, 01:00 PM

I had wheel hop on the 1/4 track in Montgomery. We will take care of that soon.

jpit · 11-11-2009, 01:17 AM

Let us know how you do it.

11-04-2009, 01:58 PM	#1 (permalink)
jpit Enthusiast Member Join Date: Feb 2009 Location: Washington State Posts: 440 Drives: 370Z Tour MT w/Spt Rep Power: 16	Wheel Hop Is anyone experiencing wheel hop under very brisk acceleration? Has this been a problem with the 350zs and 370zs?

11-05-2009, 10:45 AM	#11 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1856	If the tires are cold, they spin without noise. Get them heated up a bit and drop the clutch at 3500 = squeal. __________________ 2013 Cadillac V-Wagon, RIP Z

11-05-2009, 02:23 PM	#12 (permalink)
JoeyD Enthusiast Member Join Date: Jan 2009 Location: Raeford, NC Posts: 305 Drives: 09 NISMO 370Z Rep Power: 186	I get wheel hop fairly regularly when pulling out of my drive on cool mornings. It's not really a "problem" more so a compromise you make when having an independent rear suspension and higher HP. __________________ When was the last time you did 230MPH in something with 4 seats?

11-10-2009, 01:00 PM	#14 (permalink)
John@Z1 The370Z.com Sponsor Join Date: Nov 2008 Location: GA Posts: 1,589 Drives: Turbos Rep Power: 20	I had wheel hop on the 1/4 track in Montgomery. We will take care of that soon. __________________ Z1 Motorsports will beat any advertised price on Nissan OEM Parts! 770-838-7777 ext 311 AIM: JohnatZ1 email: John@Z1motorsports.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheel hop	m4a1mustang	Brakes & Suspension	20	09-10-2009 02:31 AM
WTB in NY: 18" oem wheel	yoozef	Parts for sale (Private Classifieds)	0	07-08-2009 07:11 PM
SSR Wheel weights.	The_Zed_car	Wheels & Tires	2	06-05-2009 01:49 PM
wheel gallery??	zcoupe09	Wheels & Tires	20	05-26-2009 12:11 PM
Wheel fitment..	zeebra	Wheels & Tires	4	04-03-2009 12:08 PM

11-04-2009, 02:26 PM	#2 (permalink)
280z/300zx Track Member Join Date: Feb 2009 Location: Nevada Posts: 689 Drives: 280z, 300zx, Vette Rep Power: 272	Only time I noticed it was at the track when launching the car. Couldn't get the damn thing to not wheel hop. Then again the Vegas speedway isn't known for having good track prep. On the street with "brisk acceleration" I get mild tire spin (doesn't make a noise at all, just feel the slip).

11-04-2009, 02:56 PM	#5 (permalink)
jpit Enthusiast Member Join Date: Feb 2009 Location: Washington State Posts: 440 Drives: 370Z Tour MT w/Spt Rep Power: 16	Let the clutch out at about 3500

11-04-2009, 09:23 PM	#9 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	The 350Z and Infiniti's have a wheel hop problem as well when they break traction. The key is to not let wheel spin get out of control. This is the technique I use at auto-x. Hold revs at around 3500 Drop clutch Feather throttle at between 50-75% such that the revs stay between 3-4.5K until you feel the rear hook up. Floor it! If the revs get too high while you don't have traction you'll just get monster wheel hop.

11-05-2009, 02:37 PM	#13 (permalink)
tranceformer A True Z Fanatic Join Date: Nov 2008 Location: Palm Beach, FL Posts: 1,213 Drives: 2009 370Z PW 6MT Rep Power: 268	I've experienced wheel hop in my 350z and a little bit in the 370z. It only seems to happen when I don't give it enough gas, somewhere in that grey area between bogging and spinning the wheels. Sometimes it happens launching at the track, NOT a good feeling. SPL makes a diff bushing set for the 350z, and according to them the kit also works on the 370z.

11-11-2009, 01:17 AM	#15 (permalink)
jpit Enthusiast Member Join Date: Feb 2009 Location: Washington State Posts: 440 Drives: 370Z Tour MT w/Spt Rep Power: 16	Let us know how you do it.