Camber help!

edzilla123 · 10-13-2015, 01:50 PM

I will be running close to -1.5 in front and -1 in the rear. Has anyone run into problems getting to those numbers without camber and toe arms?

synolimit · 10-13-2015, 04:16 PM

Yes. Front will be whatever it wants to be. On springs you're looking at -2+.

Zauskycop · 10-13-2015, 04:23 PM

What spring setup? Trying to do this stock, or aftermarket? That makes your difference...

Tracy Ramsey

MAMotorsports · 10-13-2015, 04:41 PM

If you are set on a specific number, you will need parts to make sure you can adjust to that.

Rusty · 10-13-2015, 06:17 PM

OP, do you have the stock front upper control arm?

NoHyperbole · 10-13-2015, 10:10 PM

Quote:

Originally Posted by edzilla123

I will be running close to -1.5 in front and -1 in the rear. Has anyone run into problems getting to those numbers without camber and toe arms?

You most likely will not be able to achieve those numbers without aftermarket parts.

edzilla123 · 10-13-2015, 11:41 PM

should specify what i already have stance coils with spc camber arms in the rear but i think tie will be an issue

edzilla123 · 10-13-2015, 11:42 PM

i will be running a 305 and a 345 tire so more contact the better -1.5 and -1

Rusty · 10-14-2015, 12:41 AM

Quote:

Originally Posted by edzilla123

i will be running a 305 and a 345 tire so more contact the better -1.5 and -1

What's the spec on the rims?

edzilla123 · 10-14-2015, 01:21 AM

well i just changed them 19x11 with a 275/35/19 and a 19x13.5 with a 335/30/19

Zbrah · 10-14-2015, 01:23 AM

19x11 in front? Wow!

Rusty · 10-14-2015, 01:45 AM

Quote:

Originally Posted by edzilla123

well i just changed them 19x11 with a 275/35/19 and a 19x13.5 with a 335/30/19

What's the offsets?

edzilla123 · 10-14-2015, 01:58 AM

Quote:

Originally Posted by Rusty

What's the offsets?

yeah im going with the aimgain flairs im doing an rwb inspired build so i have to go backwards, so flairs, tires, then wheels cant get offset till i determine the offset
will probly be around 0 offset in front maybe -10 and the rear i have noooo idea close to 0 again -10

edzilla123 · 10-14-2015, 02:00 AM

Wheel Fit Videos

this is how i will find my offset

Zbrah · 10-14-2015, 02:07 AM

Ahh, fender flares. I thought you were gong to run that set up on a stock body! Lol

You got a build thread? Would love to follow your progress.

10-13-2015, 01:50 PM	#1 (permalink)
edzilla123 Enthusiast Member Join Date: Aug 2014 Location: Darien, IL Posts: 280 Drives: 09,370z, red Rep Power: 11	Camber help! I will be running close to -1.5 in front and -1 in the rear. Has anyone run into problems getting to those numbers without camber and toe arms?

10-13-2015, 04:16 PM	#2 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	Yes. Front will be whatever it wants to be. On springs you're looking at -2+. __________________ 13 370z-

10-13-2015, 04:41 PM	#4 (permalink)
MAMotorsports Track Member Join Date: Jul 2015 Location: Glen Arm, MD Posts: 872 Drives: 370Z Rep Power: 17	If you are set on a specific number, you will need parts to make sure you can adjust to that. Hotrodz and Zbrah like this. __________________ Daelen @ MA Motorsports MA-Motorsports.com https://www.facebook.com/pages/MA-Mo...C/125379858828

10-13-2015, 06:17 PM	#5 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,171 Drives: 2011 Nismo GM 6M Rep Power: 2684437	OP, do you have the stock front upper control arm? __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

10-14-2015, 01:21 AM	#10 (permalink)
edzilla123 Enthusiast Member Join Date: Aug 2014 Location: Darien, IL Posts: 280 Drives: 09,370z, red Rep Power: 11	well i just changed them 19x11 with a 275/35/19 and a 19x13.5 with a 335/30/19 Zbrah likes this.

10-13-2015, 04:23 PM	#3 (permalink)
Zauskycop Base Member Join Date: May 2011 Location: Hinckley IL Posts: 228 Drives: 2012 370Z, '16 Miata Rep Power: 14	What spring setup? Trying to do this stock, or aftermarket? That makes your difference... Tracy Ramsey

10-13-2015, 11:41 PM	#7 (permalink)
edzilla123 Enthusiast Member Join Date: Aug 2014 Location: Darien, IL Posts: 280 Drives: 09,370z, red Rep Power: 11	should specify what i already have stance coils with spc camber arms in the rear but i think tie will be an issue

10-13-2015, 11:42 PM	#8 (permalink)
edzilla123 Enthusiast Member Join Date: Aug 2014 Location: Darien, IL Posts: 280 Drives: 09,370z, red Rep Power: 11	i will be running a 305 and a 345 tire so more contact the better -1.5 and -1

10-14-2015, 01:23 AM	#11 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	19x11 in front? Wow! __________________

10-14-2015, 02:00 AM	#14 (permalink)
edzilla123 Enthusiast Member Join Date: Aug 2014 Location: Darien, IL Posts: 280 Drives: 09,370z, red Rep Power: 11	Wheel Fit Videos this is how i will find my offset

10-14-2015, 02:07 AM	#15 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	Ahh, fender flares. I thought you were gong to run that set up on a stock body! Lol You got a build thread? Would love to follow your progress. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] USED: SPL Front and Rear Camber, SPC FRont Camber	martin82	Parts for sale (Private Classifieds)	15	12-30-2015 01:01 PM
Coilovers + Camber Kit-$1099, Tein + Camber Kit-$349 & More!	Marti	Suspension/Brakes	16	03-22-2013 12:39 PM
Front Camber vs. Rear Camber	osbornsm	Brakes & Suspension	2	02-21-2012 05:12 PM
will i need a camber kit?	zuperman 370	Brakes & Suspension	3	06-14-2011 04:20 PM