SPC toe bolts

FLUJOKE · 09-14-2015, 08:13 PM

so i was able to get SPC toe bolts in a package deal but the box says 350z, the guy said they'll work on a 370z bc the numbers on the box match up. Anyone else have any insight on this or should i just buy 370z toe bolts.

NORAIN · 09-15-2015, 05:32 AM

I think mine said the same thing. You should be fine.

Zipper 104 · 09-16-2015, 05:15 AM

I have a spare pair of SPC toe bolts sitting right here.
The label on the bag says Part # 72055 and # 72265, 350Z/G35 Camber/Toe Kit, however the 4 washers inside are marked 72056, so I'm thinking the 72265 is a typo. (?)
These are the same as the ones I used and on the label any reference to a 370 is nowhere to be seen.
I recall I tossed the boxes they came in so I can't say what the writing on them said.

104

Joey o · 09-20-2015, 09:17 AM

Make sure you have the right part # for our cars...I'm going thru this now. Here's what SPC Told me.

"You are correct; the 72050 kit is not the correct kit for your 370Z. Not only are the toe bolts different, the arms are not the same too. Even though you believe the arms fit, the recommended response is to return the 72050 kits and replace them with the correct parts. SPC cannot recommend using parts on an application when others are listed.

For your 370Z, you have two choice for rear arms: 72260 are the equivalent of the 72050 with rubber bushings, while 72262 has X-Axis joints instead of rubber bushings. These joints have greatly reduced deflection under load but may introduce a little more noise and/or vibration into the car.

Because you have the incorrect parts (even though they are obviously quite similar), I believe there is not a mislabeling issue her. Those are actually quite rare. We would be much more likely to think of a mislabeling issue if you had the correct part number and those parts did not fit correctly.

So, please switch out ALL the 72050 parts for either the 72260 or 72262."

Zipper 104 · 09-20-2015, 07:20 PM

Quote:

Originally Posted by Joey o

Make sure you have the right part # for our cars...I'm going thru this now. Here's what SPC Told me.

"You are correct; the 72050 kit is not the correct kit for your 370Z. Not only are the toe bolts different, the arms are not the same too. Even though you believe the arms fit, the recommended response is to return the 72050 kits and replace them with the correct parts. SPC cannot recommend using parts on an application when others are listed.

For your 370Z, you have two choice for rear arms: 72260 are the equivalent of the 72050 with rubber bushings, while 72262 has X-Axis joints instead of rubber bushings. These joints have greatly reduced deflection under load but may introduce a little more noise and/or vibration into the car.

Because you have the incorrect parts (even though they are obviously quite similar), I believe there is not a mislabeling issue her. Those are actually quite rare. We would be much more likely to think of a mislabeling issue if you had the correct part number and those parts did not fit correctly.

So, please switch out ALL the 72050 parts for either the 72260 or 72262."

Uh.....I think the OP has SPL arms, so he's just looking for which SPC toe bolts to use with them. I figure any reference to numbers for SPC arms is irrelevant.

104

104

FLUJOKE · 09-21-2015, 09:20 PM

Ended up being too short and wouldn't even fit.

Joey o · 09-26-2015, 03:02 PM

Quote:

Originally Posted by Zipper 104

Uh.....I think the OP has SPL arms, so he's just looking for which SPC toe bolts to use with them. I figure any reference to numbers for SPC arms is irrelevant.

104

104

The spc arms come with the toe bolts Johnson...just showing my mistake so he gets the right toe bolts...which he didn't cuz they're too short.

09-14-2015, 08:13 PM	#1 (permalink)
FLUJOKE Track Member Join Date: Apr 2012 Location: earth Posts: 770 Drives: car Rep Power: 2067	SPC toe bolts so i was able to get SPC toe bolts in a package deal but the box says 350z, the guy said they'll work on a 370z bc the numbers on the box match up. Anyone else have any insight on this or should i just buy 370z toe bolts.

09-15-2015, 05:32 AM	#2 (permalink)
NORAIN Enthusiast Member Join Date: Jun 2013 Location: Wilmington, NC Age: 57 Posts: 323 Drives: 2011 370Z 6M SP Rep Power: 12	I think mine said the same thing. You should be fine. __________________ Swift Springs\|265-305 RE-11\|Forgestar F14\|F.I. TDX S.S. 12" Res."Milled Out"\|K&N\|SPL\|Z1(34 row)oil cooler\|Z1 brake upgrade\|Hotchkis Zspeed\|Team Voodoo\|HPDEjunkie.com

09-16-2015, 05:15 AM	#3 (permalink)
Zipper 104 Enthusiast Member Join Date: Aug 2014 Location: Canada's Wet Coast Posts: 480 Drives: '13 PW/Frost/Spt/AT Rep Power: 11	Toe bolts I have a spare pair of SPC toe bolts sitting right here. The label on the bag says Part # 72055 and # 72265, 350Z/G35 Camber/Toe Kit, however the 4 washers inside are marked 72056, so I'm thinking the 72265 is a typo. (?) These are the same as the ones I used and on the label any reference to a 370 is nowhere to be seen. I recall I tossed the boxes they came in so I can't say what the writing on them said. 104 Last edited by Zipper 104; 09-16-2015 at 05:18 AM. Reason: addition

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Toe bolts necessary?	vqpower	Brakes & Suspension	12	10-01-2014 02:39 AM
[FOR SALE] SPC Toe bolts	JAYNO20	Parts for sale (Private Classifieds)	4	05-11-2014 08:52 PM
Toe bolts	NORAIN	Brakes & Suspension	0	03-28-2014 05:26 PM
[FOR SALE] Spc toe bolts, new	BrandonSS	Parts for sale (Private Classifieds)	6	07-11-2013 12:58 PM
WTB Toe Bolts	corbin09	Texas	0	03-16-2012 02:24 PM

09-20-2015, 09:17 AM	#4 (permalink)
Joey o Base Member Join Date: Jun 2012 Location: Ny Posts: 89 Drives: 12-PW-6MT Rep Power: 13	Make sure you have the right part # for our cars...I'm going thru this now. Here's what SPC Told me. "You are correct; the 72050 kit is not the correct kit for your 370Z. Not only are the toe bolts different, the arms are not the same too. Even though you believe the arms fit, the recommended response is to return the 72050 kits and replace them with the correct parts. SPC cannot recommend using parts on an application when others are listed. For your 370Z, you have two choice for rear arms: 72260 are the equivalent of the 72050 with rubber bushings, while 72262 has X-Axis joints instead of rubber bushings. These joints have greatly reduced deflection under load but may introduce a little more noise and/or vibration into the car. Because you have the incorrect parts (even though they are obviously quite similar), I believe there is not a mislabeling issue her. Those are actually quite rare. We would be much more likely to think of a mislabeling issue if you had the correct part number and those parts did not fit correctly. So, please switch out ALL the 72050 parts for either the 72260 or 72262."

09-21-2015, 09:20 PM	#6 (permalink)
FLUJOKE Track Member Join Date: Apr 2012 Location: earth Posts: 770 Drives: car Rep Power: 2067	Ended up being too short and wouldn't even fit.