HELP caliper

lhinojos · 07-18-2015, 02:30 PM

Default
HELP!!!

So got my calipers powder coated by a local shop(will start another thread about them later) and today while re assembling the calipers, I felt a grind when replacing the bolts that hold the caliper halfs together. So I instantly reversed the ratchet to pull the bolt out to see what was going on, and it locked the bolt. Now it won't turn any way I try to turn it. I checked the other calipers(the unassembeld ones) and found that there is dust trapped where the bolt threads into. My question is how do I loosen the bolt that is seized, also is there a way I can clean the threads for the calipers myself?

JWillis72 · 07-18-2015, 03:04 PM

Use a tap to clean the threads, if it gets tight back up a little and go again.

lhinojos · 07-18-2015, 03:11 PM

Please elaborate on what a tap is?

Trips · 07-18-2015, 03:38 PM

Taps are thread tools that cleans threads as you tighten the tool.

a example

Craftsman.com

lhinojos · 07-18-2015, 04:21 PM

ok but how do I get the bolt that is stuck out?

Trips · 07-18-2015, 04:25 PM

Use some WD-40 on the threads, And let it sit a bit.

lhinojos · 07-18-2015, 04:43 PM

Got the bolt out. Thanks trips. Heading to sears this afternoon for a thread tap

JWillis72 · 07-18-2015, 10:09 PM

Be careful with the tap! Don't force it, let it do the work. Like I said before if it gets tight back it up and go again.

Sent from my iPhone using Tapatalk

lhinojos · 07-18-2015, 10:18 PM

Ended up speaking to the shop the powder coated the calipers, they said to bring it by and that they'd take care of them as it was their mistake. So I'm going that route instead of risking the damage to the calipers seeing as I'd have to tap every thread if I went with that option.

Mike · 07-19-2015, 12:38 AM

they should just have to use compressed air to clean the junk out. Don't know what method they used to strip them though. If it was chemical, it might be a little more involved.

lhinojos · 07-19-2015, 12:43 AM

I tried compressed air but it seems to be stuck in there. He said It might be sand from the bead blast

Quote:

Originally Posted by Mike

they should just have to use compressed air to clean the junk out. Don't know what method they used to strip them though. If it was chemical, it might be a little more involved.

lhinojos · 07-21-2015, 01:08 AM

Soo I went to the shop this morning and they got all the dust out but when I asked for some bolts that I was missing(see pictures) he told me that he didnt have them but that he thinks they were just plugs.

Now Im about ready to redesign this guys face, so can anyone tell me What goes in those threads? Im really trying to avoid going back there.

Also when I got the bolt out it, it was stripped at the end. Should I still get that tap and go at the bolt and thread with it?

axmea? · 07-21-2015, 02:38 AM

Just tell us CA guys where you went so we can avoid this place. How they screwed this up is inexplicable.

lhinojos · 07-21-2015, 10:39 AM

Apmd powder coating in Ontario.

Can anyone answer me?

JARblue · 07-21-2015, 10:54 AM

Quote:

Originally Posted by lhinojos

Soo I went to the shop this morning and they got all the dust out but when I asked for some bolts that I was missing(see pictures) he told me that he didnt have them but that he thinks they were just plugs.

Now Im about ready to redesign this guys face, so can anyone tell me What goes in those threads? Im really trying to avoid going back there.

Yes there are supposed to be bolts in those holes.

07-18-2015, 02:30 PM	#1 (permalink)
lhinojos Track Member Join Date: Apr 2012 Location: Riverside, CA Posts: 559 Drives: 12 370z GM M6 Rep Power: 14	HELP caliper Default HELP!!! So got my calipers powder coated by a local shop(will start another thread about them later) and today while re assembling the calipers, I felt a grind when replacing the bolts that hold the caliper halfs together. So I instantly reversed the ratchet to pull the bolt out to see what was going on, and it locked the bolt. Now it won't turn any way I try to turn it. I checked the other calipers(the unassembeld ones) and found that there is dust trapped where the bolt threads into. My question is how do I loosen the bolt that is seized, also is there a way I can clean the threads for the calipers myself?

07-18-2015, 03:38 PM	#4 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,730 Drives: 🔰 Rep Power: 10	Taps are thread tools that cleans threads as you tighten the tool. a example Craftsman.com __________________

07-18-2015, 04:25 PM	#6 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,730 Drives: 🔰 Rep Power: 10	Use some WD-40 on the threads, And let it sit a bit. __________________

07-18-2015, 10:09 PM	#8 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Be careful with the tap! Don't force it, let it do the work. Like I said before if it gets tight back it up and go again. Sent from my iPhone using Tapatalk JARblue likes this.

07-18-2015, 10:18 PM	#9 (permalink)
lhinojos Track Member Join Date: Apr 2012 Location: Riverside, CA Posts: 559 Drives: 12 370z GM M6 Rep Power: 14	Ended up speaking to the shop the powder coated the calipers, they said to bring it by and that they'd take care of them as it was their mistake. So I'm going that route instead of risking the damage to the calipers seeing as I'd have to tap every thread if I went with that option. JWillis72 likes this.

07-18-2015, 03:04 PM	#2 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 45	Use a tap to clean the threads, if it gets tight back up a little and go again.

07-18-2015, 03:11 PM	#3 (permalink)
lhinojos Track Member Join Date: Apr 2012 Location: Riverside, CA Posts: 559 Drives: 12 370z GM M6 Rep Power: 14	Please elaborate on what a tap is?

07-18-2015, 04:21 PM	#5 (permalink)
lhinojos Track Member Join Date: Apr 2012 Location: Riverside, CA Posts: 559 Drives: 12 370z GM M6 Rep Power: 14	ok but how do I get the bolt that is stuck out?

07-18-2015, 04:43 PM	#7 (permalink)
lhinojos Track Member Join Date: Apr 2012 Location: Riverside, CA Posts: 559 Drives: 12 370z GM M6 Rep Power: 14	Got the bolt out. Thanks trips. Heading to sears this afternoon for a thread tap

07-19-2015, 12:38 AM	#10 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	they should just have to use compressed air to clean the junk out. Don't know what method they used to strip them though. If it was chemical, it might be a little more involved. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

07-21-2015, 02:38 AM	#13 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,235 Drives: WELL ZED PW 6MT Rep Power: 53241	Just tell us CA guys where you went so we can avoid this place. How they screwed this up is inexplicable. Hotrodz likes this. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

07-21-2015, 10:39 AM	#14 (permalink)
lhinojos Track Member Join Date: Apr 2012 Location: Riverside, CA Posts: 559 Drives: 12 370z GM M6 Rep Power: 14	Apmd powder coating in Ontario. Can anyone answer me?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Caliper color????	wildmark	Brakes & Suspension	5	08-24-2014 09:04 PM
Caliper color	Ill	Exterior & Interior	8	08-13-2012 03:55 PM
Caliper Covers	mengel	Brakes & Suspension	52	06-06-2012 11:28 AM
MGP caliper covers?	Investr	Nissan 370Z General Discussions	45	04-20-2012 04:09 PM
caliper replacement	Z eliminator	Brakes & Suspension	10	04-01-2011 06:26 PM