Lower Control Arm Question
 

Hey guys!

So I was told today by my tire/suspension people that my lower control arm on the driver side is pretty much bust.

I already knew that there was a problem on that side of the car due to the results of my last alignment, in which the front driver wheel could only be adjusted to the following specs:

Camber -0.1*
Caster 2.7* (this is the worst one, specified range is 4.4*-5.9*)
Toe was fine

Should I purchase an OEM arm, or go for some aftermarket ones for both sides? Any insight will be welcomed, thanks!

i dont think there's any aftermarket LCA's for our car. you'd pretty much have to buy OEM

:iagree:

you could replace bushings with solid ones while you are in there if you wanted to upgrade. IIRC the set runs about $400-500, made by SPL. I think there is a Delrin option out there too. Maybe others have more info.

so what happened to your lower arm to make it bust?

If your caster is out that much. I don't know. Something's wrong.


My thread on the front end. :D

http://www.the370z.com/brakes-suspen...uspension.html