01-25-2015, 09:59 AM
|
#1 (permalink)
|
|
Track Member
Join Date: Jul 2012
Location: New Jersey
Posts: 997
Drives: 11 Nissan 370Z BS M6
Rep Power: 14
|
Quote:
Originally Posted by Rusty
I'm tracking with the Akebono's with no problems. I also run a Hard Brake heat shield between the pads and pistons.
Another thing too. Might have one piston hanging up in a caliper. But you could see that in pad wear.
|
And pad wear does seem even/fine as I have changed the pads (and rebed them) often in the past. Been riding consistently on my EBC yellows lately though. I'll get my camber specs - I know they're around here somewhere. Also, since I had the corner balance/alignment done last year I wonder if it's still in spec now. I have SPC front arms and the eibach rear camber arms. I know they're not SPL, and I do put them through some abuse. I guess we'll see what it shows in March when I go for my re-alignment. I'll try a few of these things in the meantime. Thanks again for the input guys. If anyone has any other thoughts please let me know!
|
|
|
Similar Threads
1Likes
Hybrid Mode
