HID Replacement Low Beam Bulbs @ JWM- Free shipping!

JWMotoring · 03-13-2012, 08:19 AM

Thanks for the order. Those will be shipping later today.

JWMotoring · 03-13-2012, 11:44 AM

Quote:

Originally Posted by Mr_Cann

cool any pix?? btw how long did it take for your bulbs to come in??

You're not too far from here. I would guess they will be there before the weekend.

pty370z · 03-13-2012, 12:08 PM

Hi guys, question for JWM or others who have bought these bulbs..

Have any of you ran into the "flickering" issue that some people experienced with other brands..??

By flickering I mean, sometimes you turn off the lights, and when you turn them back on immediately, bulbs don't light up... Sometimes they needed to be switched off and on several times before they lit up again...

I ran into an issue like this with a different brand of bulbs and it ended up melting the harness on the right headlight.. Had to purchase a new harness..

People were recommending a japanese brand called RIGG (hard to get) and also Philips Ultinon bulbs (expensive)..

Appreciate the input...

nmjaxx9 · 03-13-2012, 12:18 PM

Quote:

Originally Posted by pty370z

Hi guys, question for JWM or others who have bought these bulbs..

Have any of you ran into the "flickering" issue that some people experienced with other brands..??

By flickering I mean, sometimes you turn off the lights, and when you turn them back on immediately, bulbs don't light up... Sometimes they needed to be switched off and on several times before they lit up again...

I ran into an issue like this with a different brand of bulbs and it ended up melting the harness on the right headlight.. Had to purchase a new harness..

People were recommending a japanese brand called RIGG (hard to get) and also Philips Ultinon bulbs (expensive)..

Appreciate the input...

Hey pty...I had a similar problem, however I didn't melt the harness. I don't think its a problem with the bulb, rather for me it was properly securing the bulb in slot, and making sure the pins were aligned and tight. Also, the main thing is to make sure the bulb pad is making proper contact with the bulb end. This ensures that there is no flickering or loose connection. I know when I first installed some bulbs, my bulb case was not properly secured around the bulb, and when I turned it on, it flickered and turned off, it took a couple tries to get it to work. So I went back in, and I unhooked the bulb pad, took out the bulb, then carefully put it back in, secured it and made sure the bulb pad was back on tight (you should feel some resistance when you turn it). It solved my problem.

JWMotoring · 03-13-2012, 12:43 PM

Quote:

Originally Posted by pty370z

Hi guys, question for JWM or others who have bought these bulbs..

Have any of you ran into the "flickering" issue that some people experienced with other brands..??

By flickering I mean, sometimes you turn off the lights, and when you turn them back on immediately, bulbs don't light up... Sometimes they needed to be switched off and on several times before they lit up again...

I ran into an issue like this with a different brand of bulbs and it ended up melting the harness on the right headlight.. Had to purchase a new harness..

People were recommending a japanese brand called RIGG (hard to get) and also Philips Ultinon bulbs (expensive)..

Appreciate the input...

Nothing like that has been reported to me.

pty370z · 03-13-2012, 01:11 PM

Quote:

Originally Posted by nmjaxx9

Hey pty...I had a similar problem, however I didn't melt the harness. I don't think its a problem with the bulb, rather for me it was properly securing the bulb in slot, and making sure the pins were aligned and tight. Also, the main thing is to make sure the bulb pad is making proper contact with the bulb end. This ensures that there is no flickering or loose connection. I know when I first installed some bulbs, my bulb case was not properly secured around the bulb, and when I turned it on, it flickered and turned off, it took a couple tries to get it to work. So I went back in, and I unhooked the bulb pad, took out the bulb, then carefully put it back in, secured it and made sure the bulb pad was back on tight (you should feel some resistance when you turn it). It solved my problem.

I had it happen and in my case it was the bulbs.. Put the stock bulbs back in, problem solved.. No issues... Changed bulbs, problems... Stock bulbs again, no issues...

Quote:

Originally Posted by JWMotoring

Nothing like that has been reported to me.

Thanks! I may order a set of 6K soon..

Mr_Cann · 03-13-2012, 04:48 PM

sweet can't wait!!

370ZilverZ · 03-13-2012, 07:06 PM

Before I tested these bulbs, I read all of the DIY threads on bulb replacements and noted the flickering problem. I cycled the lights several times to make sure we didn't have this issue before they were released.
Jhonathan, let me know if you can think of anything I can check out for you on this if needed.

nmjaxx9 · 03-13-2012, 10:37 PM

Quote:

Originally Posted by pty370z

I had it happen and in my case it was the bulbs.. Put the stock bulbs back in, problem solved.. No issues... Changed bulbs, problems... Stock bulbs again, no issues...

hmm well def the bulbs then, ive had a good 6 months with my bulbs and no issues after what I corrected what I said before.

370ZilverZ · 03-13-2012, 10:43 PM

Jhonathan, If you get any sent back that had this problem with flickering, I'd be glad to see if I get the same issue with them.

JWMotoring · 03-13-2012, 11:33 PM

Thanks Daemon.

I've sold a ton already with no issues so I don't see it happening.

Romulus1 · 03-14-2012, 10:28 AM

I had that problem too once before, gotta make sure that bulbs all the way in and properly secured with the clips, harness needs the be on there tight and flush, just like it was said earlier. That's all it turned out to be.

MightyZ34 · 03-14-2012, 12:08 PM

JWMotoring Order placed!! Woot, Woot! can't wait. Although i had this question about lumens!

So the more lumens you have the brighter or more light the bulb projects??! Or if you get a good balance between 3k & 2k lumens the brighter your light is? Thanks

JWMotoring · 03-14-2012, 12:49 PM

Quote:

Originally Posted by MightyZ34

JWMotoring Order placed!! Woot, Woot! can't wait. Although i had this question about lumens!

So the more lumens you have the brighter or more light the bulb projects??! Or if you get a good balance between 3k & 2k lumens the brighter your light is? Thanks

Thanks

You're just up the interstate so you should have them really quick.

Oh yeah sorry I don't have any of the items you asked about in the notes. Maybe I should get some made.

nmjaxx9 · 03-16-2012, 11:06 AM

Quote:

Originally Posted by Romulus1

I had that problem too once before, gotta make sure that bulbs all the way in and properly secured with the clips, harness needs the be on there tight and flush, just like it was said earlier. That's all it turned out to be.

Yeah usually this is the problem, and in most cases its how you put it in versus the bulb itself being bad. However, there are exceptions, especially if you buy the cheap bulbs online, from a company that is not well known.

03-13-2012, 08:19 AM	#46 (permalink)
JWMotoring Track Member Join Date: Jan 2012 Location: Oklahoma City Posts: 746 Drives: 370Z Rep Power: 14	Thanks for the order. Those will be shipping later today. __________________ Check out our Z selection Amsoil Ind. Dealer- Sign up to save 25% off fluids

03-13-2012, 12:08 PM	#48 (permalink)
pty370z Track Member Join Date: Apr 2009 Location: Panama City, Panama Posts: 654 Drives: over the speed limit Rep Power: 17	Hi guys, question for JWM or others who have bought these bulbs.. Have any of you ran into the "flickering" issue that some people experienced with other brands..?? By flickering I mean, sometimes you turn off the lights, and when you turn them back on immediately, bulbs don't light up... Sometimes they needed to be switched off and on several times before they lit up again... I ran into an issue like this with a different brand of bulbs and it ended up melting the harness on the right headlight.. Had to purchase a new harness.. People were recommending a japanese brand called RIGG (hard to get) and also Philips Ultinon bulbs (expensive).. Appreciate the input... __________________ 2010 Solid Red 370Z * *Touring-Sport-6MT Black Interior Performance:** STILLEN * BERK * UR * MISHIMOTO * K&N * Z1 * ZSPEED * UPREV * DBA Interior: GT-R Red Start/Stop Button * MSA Floor Mats * PW:JDM Exterior: INGS+1 * SEIBON * FUJIMURA * PW:JDM * UAM * KICS * VOLK

03-13-2012, 07:06 PM	#53 (permalink)
370ZilverZ A True Z Fanatic Join Date: Dec 2011 Location: DFW, TX Age: 67 Posts: 2,321 Drives: '11 BMW Z4 Rep Power: 18	Before I tested these bulbs, I read all of the DIY threads on bulb replacements and noted the flickering problem. I cycled the lights several times to make sure we didn't have this issue before they were released. Jhonathan, let me know if you can think of anything I can check out for you on this if needed. __________________ 370ZilverZ Journal BMW Z4

03-13-2012, 10:43 PM	#55 (permalink)
370ZilverZ A True Z Fanatic Join Date: Dec 2011 Location: DFW, TX Age: 67 Posts: 2,321 Drives: '11 BMW Z4 Rep Power: 18	Jhonathan, If you get any sent back that had this problem with flickering, I'd be glad to see if I get the same issue with them. __________________ 370ZilverZ Journal BMW Z4

03-14-2012, 10:28 AM	#57 (permalink)
Romulus1 Track Member Join Date: May 2011 Location: Long Island, NY Posts: 691 Drives: '11 370Z Sport 6MT Rep Power: 15	I had that problem too once before, gotta make sure that bulbs all the way in and properly secured with the clips, harness needs the be on there tight and flush, just like it was said earlier. That's all it turned out to be. __________________ 11 SR 370Z Sport 6MT - Sold 03 Escalade AWD - Sold 13 Silverado LTZ Z71 Crew Cab

03-13-2012, 04:48 PM	#52 (permalink)
Mr_Cann Base Member Join Date: Nov 2011 Location: In My Skin Posts: 164 Drives: 4-Wheels Rep Power: 13	sweet can't wait!!

03-13-2012, 11:33 PM	#56 (permalink)
JWMotoring Track Member Join Date: Jan 2012 Location: Oklahoma City Posts: 746 Drives: 370Z Rep Power: 14	Thanks Daemon. I've sold a ton already with no issues so I don't see it happening.

03-14-2012, 12:08 PM	#58 (permalink)
MightyZ34 Base Member Join Date: May 2011 Location: Wichita, KS Posts: 13 Drives: 10 PW Nissan 370Z M6 Rep Power: 14	JWMotoring Order placed!! Woot, Woot! can't wait. Although i had this question about lumens! So the more lumens you have the brighter or more light the bulb projects??! Or if you get a good balance between 3k & 2k lumens the brighter your light is? Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
*Intro Pricing on 370Z LED License Plate Bulbs + Free Shipping!	JWMotoring	Body Interior/Exterior	308	05-13-2016 12:13 AM
** ULTIMATE Brake Replacement Thread \| Free Shipping \| Stoptech Centric Power	THMotorsports	Suspension/Brakes	906	04-20-2015 05:35 PM
Free Lugs, Free Center Caps, and Free Shipping	KamiSpeed	Tires/Wheels	2	11-26-2011 05:29 PM
\|\| SpeedElement OEM Replacement D2S HID bulbs- $39 SHIPPED!!! \|\|	SE	Body Interior/Exterior	13	01-19-2011 02:01 AM
Interior Map light ( replacement bulbs )	355890	Exterior & Interior	26	04-23-2009 06:27 PM