JDM Fairlady Z Reverse Fog Light

Z1motorsports · 06-27-2011, 04:29 PM

Straight from Japan, this JDM Reverse Fog Light removes the factory blank that was installed from the factory.

This piece is simple to install on its own. However, it will require some wiring knowledge in order to wire up the light so that it is operational. Originally this light is activated by a separate switch during Foggy conditions.

This is another great little piece to add a bit of JDM style to your 370Z.

$59.95

You may also choose to add a Z1 Motorsports JDM Reverse Fog Light Installation Harness that allows you to plug directly into the JDM Reverse Fog Lamp without the need of cutting up your 370Z's harness. The kit includes all necessary connectors and instructions to make your JDM Reverse Fog Light functional.
You may choose from the following options:

Short Length Harness - Designed to wire the Fog Light so that it functions whenever the Running or Head lights are functional. $15.00
Long Length Harness - Designed to wire the Fog Light so that it functions with either the Brake, Turn Signal or Running/Head Lights. $18.00
Basic Pigtail Connector - Used for people looking to create their own custom wiring harness. (Does NOT include instructions.) $12.00

Ordering information can be found HERE.

Z1motorsports · 07-13-2011, 04:12 PM

Light and harnesses are in stock and ready to ship.

Z1motorsports · 08-04-2011, 06:31 PM

Kits are in stock.

ihatepotholes · 10-04-2011, 07:47 PM

can this be converted to brake light? does bumper need to be removed for the installation?

The Dimer · 10-04-2011, 08:41 PM

I believe you could wire it to the brake lights if you had long enough wires. I wired mine up to the license plate lights so it just comes on when the rest of my lights do.

And no, you do not have to remove the bumper. There is a diy on here somewhere on how to do it.

The Dimer · 10-04-2011, 08:45 PM

Here's a couple DIYs I found real quick. I used AK's when I did mine just to figure how to get the plug off. Figured the wiring part out on my own.

DIY:REAR Fog Light install with New harness for US spec 370Z + Radar hardwire w/pics

DIY: Rear Fog Light Wire Via BCM and Stock Wiring

DIY: of complete FOG LAMP install

Z1motorsports · 10-05-2011, 10:45 AM

Fog lights and harnesses are in stock and ready to ship.

ihatepotholes · 10-05-2011, 02:43 PM

Quote:

Originally Posted by The Dimer

Here's a couple DIYs I found real quick. I used AK's when I did mine just to figure how to get the plug off. Figured the wiring part out on my own.

DIY:REAR Fog Light install with New harness for US spec 370Z + Radar hardwire w/pics

DIY: Rear Fog Light Wire Via BCM and Stock Wiring

DIY: of complete FOG LAMP install

thanks man i appreciated!

svmtbman · 10-05-2011, 03:55 PM

I bought the kit from Z1 that included the longer harness to wire to the brake lights. It's a pretty easy job and no you do not need to remove the rear bumper. You do remove some of the interior pieces in the rear hatch area in order to get to the wiring on the driver's side rear tail light.

ihatepotholes · 10-06-2011, 02:08 PM

payment sent for the fog lights with long length harness and stillen front lip.

ihatepotholes · 10-06-2011, 02:12 PM

Quote:

Originally Posted by svmtbman

I bought the kit from Z1 that included the longer harness to wire to the brake lights. It's a pretty easy job and no you do not need to remove the rear bumper. You do remove some of the interior pieces in the rear hatch area in order to get to the wiring on the driver's side rear tail light.

sorry for my stupid questions. because im not sure how this light works.

does the fog light turn on everytime i turn on my headlights? or does it only light up when i brake?

im looking for something that works like a taillight. it lights up when i turn on the headlights and lights up brighter when i brake. am i making sense?

thank you

MattP725 · 10-06-2011, 02:14 PM

This is not a dual fillament setup which would be required to wire it the way you'd like. Someone correct me if I am wrong.

svmtbman · 10-06-2011, 08:56 PM

Quote:

Originally Posted by MattP725

This is not a dual fillament setup which would be required to wire it the way you'd like. Someone correct me if I am wrong.

Correct, you can set it up either way but not both.

John@Z1 · 10-21-2011, 08:42 AM

bump.

dAvenue · 11-01-2011, 09:09 PM

I'm a repeat customer and just placed an order for this fog lamp/short harness. With the 3 Day express, will I get it by this weekend?

06-27-2011, 04:29 PM	#1 (permalink)
Z1motorsports The370Z.com Sponsor Join Date: Jan 2009 Location: Georgia Posts: 530 Drives: Silver Z32 Rep Power: 17	JDM Fairlady Z Reverse Fog Light Straight from Japan, this JDM Reverse Fog Light removes the factory blank that was installed from the factory. This piece is simple to install on its own. However, it will require some wiring knowledge in order to wire up the light so that it is operational. Originally this light is activated by a separate switch during Foggy conditions. This is another great little piece to add a bit of JDM style to your 370Z. $59.95 You may also choose to add a Z1 Motorsports JDM Reverse Fog Light Installation Harness that allows you to plug directly into the JDM Reverse Fog Lamp without the need of cutting up your 370Z's harness. The kit includes all necessary connectors and instructions to make your JDM Reverse Fog Light functional. You may choose from the following options: Short Length Harness - Designed to wire the Fog Light so that it functions whenever the Running or Head lights are functional. $15.00 Long Length Harness - Designed to wire the Fog Light so that it functions with either the Brake, Turn Signal or Running/Head Lights. $18.00 Basic Pigtail Connector - Used for people looking to create their own custom wiring harness. (Does NOT include instructions.) $12.00 Ordering information can be found HERE. __________________ Z1 Motorsports is THE 370Z Parts Specialist www.370Zparts.com Last edited by Z1motorsports; 06-27-2011 at 04:57 PM.

07-13-2011, 04:12 PM	#2 (permalink)
Z1motorsports The370Z.com Sponsor Join Date: Jan 2009 Location: Georgia Posts: 530 Drives: Silver Z32 Rep Power: 17	Light and harnesses are in stock and ready to ship. __________________ Z1 Motorsports is THE 370Z Parts Specialist www.370Zparts.com

08-04-2011, 06:31 PM	#3 (permalink)
Z1motorsports The370Z.com Sponsor Join Date: Jan 2009 Location: Georgia Posts: 530 Drives: Silver Z32 Rep Power: 17	Kits are in stock. __________________ Z1 Motorsports is THE 370Z Parts Specialist www.370Zparts.com

10-05-2011, 10:45 AM	#7 (permalink)
Z1motorsports The370Z.com Sponsor Join Date: Jan 2009 Location: Georgia Posts: 530 Drives: Silver Z32 Rep Power: 17	Fog lights and harnesses are in stock and ready to ship. __________________ Z1 Motorsports is THE 370Z Parts Specialist www.370Zparts.com

10-05-2011, 03:55 PM	#9 (permalink)
svmtbman Base Member Join Date: Mar 2011 Location: Macon, GA Age: 53 Posts: 219 Drives: 2011 370Z PW M6 Rep Power: 14	I bought the kit from Z1 that included the longer harness to wire to the brake lights. It's a pretty easy job and no you do not need to remove the rear bumper. You do remove some of the interior pieces in the rear hatch area in order to get to the wiring on the driver's side rear tail light. __________________ 2011 Pearl White, Persimmon, Touring, Sport, Navigation, 6sp - PW JDM shift knob, Invidia Gemini CBE, aFe dry filters, HPS intake tubes, JDM fog light, Redline shift boot, LED interior lights, Z1 hood struts, and 30% tint.

10-04-2011, 07:47 PM	#4 (permalink)
ihatepotholes Base Member Join Date: Jan 2010 Location: nj Posts: 129 Drives: 2012 Boss 302 Rep Power: 15	can this be converted to brake light? does bumper need to be removed for the installation?

10-04-2011, 08:41 PM	#5 (permalink)
The Dimer Track Member Join Date: Mar 2011 Location: Bolingbrook, IL Posts: 632 Drives: 2010 PW 370z Rep Power: 15	I believe you could wire it to the brake lights if you had long enough wires. I wired mine up to the license plate lights so it just comes on when the rest of my lights do. And no, you do not have to remove the bumper. There is a diy on here somewhere on how to do it.

10-04-2011, 08:45 PM	#6 (permalink)
The Dimer Track Member Join Date: Mar 2011 Location: Bolingbrook, IL Posts: 632 Drives: 2010 PW 370z Rep Power: 15	Here's a couple DIYs I found real quick. I used AK's when I did mine just to figure how to get the plug off. Figured the wiring part out on my own. DIY:REAR Fog Light install with New harness for US spec 370Z + Radar hardwire w/pics DIY: Rear Fog Light Wire Via BCM and Stock Wiring DIY: of complete FOG LAMP install

10-06-2011, 02:08 PM	#10 (permalink)
ihatepotholes Base Member Join Date: Jan 2010 Location: nj Posts: 129 Drives: 2012 Boss 302 Rep Power: 15	payment sent for the fog lights with long length harness and stillen front lip.

10-06-2011, 02:14 PM	#12 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 17	This is not a dual fillament setup which would be required to wire it the way you'd like. Someone correct me if I am wrong.

10-21-2011, 08:42 AM	#14 (permalink)
John@Z1 The370Z.com Sponsor Join Date: Nov 2008 Location: GA Posts: 1,589 Drives: Turbos Rep Power: 19	bump. __________________ Z1 Motorsports will beat any advertised price on Nissan OEM Parts! 770-838-7777 ext 311 AIM: JohnatZ1 email: John@Z1motorsports.com

11-01-2011, 09:09 PM	#15 (permalink)
dAvenue A True Z Fanatic Join Date: Aug 2010 Location: present Posts: 1,971 Drives: angry Rep Power: 49	I'm a repeat customer and just placed an order for this fog lamp/short harness. With the 3 Day express, will I get it by this weekend? __________________ Takeda \| Stillen \| Z1 \| Invidia \| Mishimoto \| CSF \| Megan Racing \| Koni \| Eibach \| SPC \| Forgestar \| Seibon

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
reverse fog light with white LEDs?	Dark Sarcasm	Exterior & Interior	7	03-09-2011 06:29 PM
BRAND NEW JDM Fairlady Z Reverse Fog Light with long length harness	ilostmypill	Parts for sale (Private Classifieds)	11	09-23-2010 05:40 AM
Backup camera and Reverse light	Trolling222	Audio & Video	8	05-10-2010 11:31 AM
Does anyone know how to change the reverse light?	JNguyen	DIY Section (Do-It-Yourself)	5	01-27-2010 03:28 PM
Reverse/Backup Light Signals	pty370z	Exterior & Interior	5	10-09-2009 01:09 PM