ZSpeed Performance Aluminum Engine Undershrouds New Vendor Special!

Zat_Zuma · 04-04-2013, 02:33 PM

Any chance of changing the oil filter access door to the other side for those with oil relocation kits?

I would buy one in second, if that option was available

Joe@ZSpeed · 04-10-2013, 04:10 PM

Bump!

XwChriswX · 04-10-2013, 05:03 PM

Just Installed mine today! Install was super easy.

Tools Required:
10mm Socket for OEM bolt removal
5/32nds Hex Bit for ZSpeed Bolts
Flathead screwdriver for pop rivets

Onto the pics!

Here's my plastic undertray, it's been in need of dire replacement for some time.

ZSpeed Aluminum Undertray

To install, simply remove your plastic undertray with all 16 bolts and 3 pop clips. I ordered my Undertray with the additional stainless steel bolts and they look great. There will be 16 bolts, 16 washers, and 12 receiver clips for the bolts to replace the OEM ones. Seen here:

Old Clip

New Clip

You will be removing and replacing the clips for all of these places on the original undertray.

And make sure you replace all 16 Bolts and 3 Pop Rivets when you're done.

Thanks to AK370Z for those 2 pics.

Make sure to keep the piles of clips separated so you don't re-use an old one. They will also be different colors so that can help differentiate as well.

Side Bolts Installed

Front Bolts Installed

I went ahead and put the 3 plastic pop rivets back in to prevent the panel from rattling against the crossbar. They pop right back in.

And of course, the amazing trap door...

With the door removed, you can see you have plenty of clearance to get to the oil drain plug, and potentially the filter. I have a sandwich plate installed with my oil cooler, I'm not worried about draining, only about getting my arm articulated up in there to get the filter loose and removed. I'll post an update when I do my next oil change.

Isamu · 04-10-2013, 05:06 PM

looks awesome man!

italy3541 · 04-10-2013, 05:22 PM

price shipped to 17055..

Joe@ZSpeed · 04-10-2013, 05:23 PM

Looks Great, If I do say so myself

A few notes, You can re-use the old hardware if its in good shape, All the bolt threads are OEM size. We include the new J-Nuts in case the stock ones have rusted and are stuck or broken.

Only the Stainless hardware kit requires the 5/32" hex bit, Standard hardware we offer that comes with the shields unless you upgrade to the Stainless is 10mm head like the stock stuff.

Thanks for taking time to do this, I'm sure it will be a help to others!

XwChriswX · 04-10-2013, 05:24 PM

Quote:

Originally Posted by Joe@ZSpeed

Looks Great, If I do say so myself

A few notes, You can re-use the old hardware if its in good shape, All the bolt threads are OEM size. We include the new J-Nuts in case the stock ones have rusted and are stuck or broken.

Only the Stainless hardware kit requires the 5/32" hex bit, Standard hardware we offer that comes with the shields unless you upgrade to the Stainless is 10mm head like the stock stuff.

Thanks for taking time to do this, I'm sure it will be a help to others!

Thanks for the super quick shipping and a good sturdy product. I just wish it wasn't up under the car where it can't be seen.

ZMan8 · 04-10-2013, 05:38 PM

looks great!

Urbanracer · 05-11-2013, 04:11 PM

Just ordered one for my nismo, looking forward to getting this installed.

TreeSemdyZee · 05-28-2013, 10:25 PM

How soon will the V2 powdercoat be available? Currently sold out.

speedfreek · 05-28-2013, 10:36 PM

If I am getting Hotchkis or Whiteline sway bars would I need the V2 undershroud?

Isamu · 05-28-2013, 11:18 PM

I need one of these asap... my plastic nismo undershroud was damaged!

GaleForce · 05-29-2013, 07:31 AM

Quote:

Originally Posted by Isamu

I need one of these asap... my plastic nismo undershroud was damaged!

I thought your undershroud was damaged last year? Get that thing fixed already!

GaleForce · 05-29-2013, 07:35 AM

I'm curious on the durability of the black powder coat. I'm wondering how well it handles getting peppered by normal road dust and dirt. My thinking is, if the black one is going to get marked up I may as well start with the silver one.

Isamu · 05-29-2013, 07:36 AM

Quote:

Originally Posted by GaleForce

I thought your undershroud was damaged last year? Get that thing fixed already!

it was redamaged right before I parked it

04-04-2013, 02:33 PM	#151 (permalink)
Zat_Zuma A True Z Fanatic Join Date: Nov 2008 Location: Edmonton, Alberta ...eh Posts: 1,171 Drives: 2017 Touring auto Rep Power: 19	Any chance of changing the oil filter access door to the other side for those with oil relocation kits? I would buy one in second, if that option was available __________________ [B]2009 & 2017 370Z Touring Sport Autos SOLD

04-10-2013, 04:10 PM	#152 (permalink)
Joe@ZSpeed A True Z Fanatic Join Date: Mar 2011 Location: Ohio Posts: 1,304 Drives: Nissan Rep Power: 343000	Bump! __________________ http://photos.zspeedperformance.com/...ardsize=468x60 Phone *937-506-7224* E-Mail Sales@Zspeed.com www.ZSPEED.com

04-10-2013, 05:23 PM	#156 (permalink)
Joe@ZSpeed A True Z Fanatic Join Date: Mar 2011 Location: Ohio Posts: 1,304 Drives: Nissan Rep Power: 343000	Looks Great, If I do say so myself A few notes, You can re-use the old hardware if its in good shape, All the bolt threads are OEM size. We include the new J-Nuts in case the stock ones have rusted and are stuck or broken. Only the Stainless hardware kit requires the 5/32" hex bit, Standard hardware we offer that comes with the shields unless you upgrade to the Stainless is 10mm head like the stock stuff. Thanks for taking time to do this, I'm sure it will be a help to others! __________________ http://photos.zspeedperformance.com/...ardsize=468x60 Phone *937-506-7224* E-Mail Sales@Zspeed.com www.ZSPEED.com

04-10-2013, 05:38 PM	#158 (permalink)
ZMan8 A True Z Fanatic Join Date: Oct 2011 Location: Chicago, IL Posts: 5,844 Drives: 10 370z 40th M6 Rep Power: 659	looks great! __________________ 2010 370Z 40 Anniv., 6 MT \| Fast Intentions \| Swift Springs \| SPC \| Z1Motorsports \| JWM \| Redline Oils \| 35% Window Tint 2015 Mazda6 \| 370ZChicago: Chicago Area Cars & Coffee

05-11-2013, 04:11 PM	#159 (permalink)
Urbanracer Enthusiast Member Join Date: Oct 2009 Location: The mid-west, USA Posts: 266 Drives: God's Chariot Rep Power: 16	Just ordered one for my nismo, looking forward to getting this installed. __________________ 09 Nismo - HKS \| Berk \| HPS \| K&N \| Zspeed 09 Maxima \| 09 CBR 1000RR \| 02 CBR F4i

04-10-2013, 05:22 PM	#155 (permalink)
italy3541 A True Z Fanatic Join Date: Jan 2011 Location: pa Posts: 1,491 Drives: 2014BMW Z4 35isdrive Rep Power: 18	price shipped to 17055..

05-28-2013, 10:25 PM	#160 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 61 Posts: 4,887 Drives: '09 370 & ‘14 Juke Rep Power: 27409	How soon will the V2 powdercoat be available? Currently sold out. __________________ Borla S-Type \| Motordyne \| Z1 (lots) \| South Bend \| K&N \| Nismo/Nismo S-Tune \| Eibach \| Aerojacket \| Fujimara \| Spl \| ZSpeed Performance \| Kenwood-Infinity-Sound Ordnance \| Whiteline \| Ecutek \| Hotchkis \| Clazzio \| VQ Vortex \|Morimoto XB \|Dynosty Tune 329.64hp 265.73 ft/lb

05-28-2013, 10:36 PM	#161 (permalink)
speedfreek A True Z Fanatic Join Date: Feb 2012 Location: Huntsville,AL Posts: 1,724 Drives: '12 370Z PW 6sp Rep Power: 19	If I am getting Hotchkis or Whiteline sway bars would I need the V2 undershroud? __________________ Tomei\|Berk\|Takeda\|ZSpeed\|Fortune Auto\|Swift\|Eibach\|SPL\|Carbotech\|Motul\|Powertrix\|Stillen\|Aerojacket\|Z1\|Forgestar\|Enkei\|Project Kics\|Nismo Ti\|Llumar speedfreek's journal

05-29-2013, 07:35 AM	#164 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	I'm curious on the durability of the black powder coat. I'm wondering how well it handles getting peppered by normal road dust and dirt. My thinking is, if the black one is going to get marked up I may as well start with the silver one. LMBmikeZ likes this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Vendor: G&M Performance	WildBill@G&M	New Forum Member	46	02-09-2011 01:44 PM
370zTUNE.com New Authorized Vendor For ARK PERFORMANCE INC	TeamARK	ARK Performance Inc	0	01-13-2011 03:52 PM
Aluminum Engine Under Shroud	MB370Z	Exterior & Interior	32	12-28-2010 08:20 PM
New Vendor: J-Tune Performance	J-Tune	North East Region	14	02-09-2010 09:45 AM