GB: EVO-R 370Z Rear Diffuser Free Shipping

HATED1 · 12-02-2010, 05:16 AM

Got mine on tonight, I like it! Thanks! However that center bolt just falls out, so I guess I'll just go without it, unless someone knows the exact size

Csquared · 12-02-2010, 08:10 AM

I'm gonna readjust mine tomorrow over lunch the on the driver side (your passenger side) Keeps slipping off, Gonna add a little more tape to that side.

I'm also gonna try to but a bolt in the center, Hate1 if I figure out one that works i'll let you know what size i used.

XwChriswX · 12-02-2010, 12:43 PM

For the guys that have installed this, did it slip on over the exhaust tips, or did you need to remove them to install it? Specifically F.I. Exhaust Tips??

That's my only hesitation with this. And confirm it just slips over the Fog Light, I don't need to remove the foglight prior to putting this on?

Thanks!

HATED1 · 12-02-2010, 01:45 PM

Alright guys here some tips for the rear diffuser:
When you put the 3m tape on the rear diffuser line it up as close as possible to the outer edges on the top, I would suggest doubling (sticking another piece over the existing exposed piece) around the exhaust areas, where it curves around on both sides. If possible, I would suggest the stronger double sided tape mentioned in another thread, I don't know the part number?
~also heat up the carbon piece with the tape on it as well as the surface of the vehicle, i used a space heater, 15 mins before, 20 mins after It was put on with me applying pressure.
~there are 2 screws that need to be hand screwed in, for those of you worried about the damage done to the body, DON'T, these holes are located way inside and are unnoticeable, as well as very small, in fact if you don't like the diffuser for some reason, I don't see a problem taking it off, there will be no visible evidence that it once was there. As long as you can get the tape residue off.
~still waiting on the info for the center bolt, however it does feel secure enough to leave it off
~if you have exhaust tips that are close to the rear bumper, do not get this as it will most likely touch and ruin the diffuser, possibly cause vibrations as well. I do have a berk cbe which fits perfectly around.

Hope these tips help

HATED1 · 12-02-2010, 01:47 PM

Oh and it slips over both the fog light and exhausts, no need to remove any pieces.

XwChriswX · 12-02-2010, 01:49 PM

Quote:

Originally Posted by HATED1

Oh and it slips over both the fog light and exhausts, no need to remove any pieces.

I'm wondering since I have the F.I. exhaust will it bump/rub/melt

But you said the Berks cleared no prob? cool cool

HATED1 · 12-02-2010, 07:47 PM

some pics of mine, and a shot for you XwchriswX you be the judge if it will fit or not

AllForTheCash · 12-02-2010, 08:37 PM

Quote:

Originally Posted by HATED1

Got mine on tonight, I like it! Thanks! However that center bolt just falls out, so I guess I'll just go without it, unless someone knows the exact size

The bolt is suppose to screw into a nut on top and then you tighten it!

XwChriswX · 12-03-2010, 12:00 PM

Thanks Hated1, looks like it will have enough clearance. I'm crossin my fingers! lol

HATED1 · 12-04-2010, 02:33 AM

I got the bolt but no nut, found a nut, now life is good!

God-Speed · 12-04-2010, 12:57 PM

Very Nice, once I get my wheel & tire package taken care of, this will be the next mod!!

atx370z · 12-04-2010, 01:50 PM

im a little hesitant whether i should pull the trigger on this or not. Can anyone post some shots from the side and angles from farther back from the car.

EVOR · 02-24-2011, 01:41 PM

Free shipping is still good to go. In stock!

karotZ · 04-10-2011, 08:45 PM

I know it is mentioned somewhere on the thread about fitment with FI TDX. But has anyone actually tried if it fits? And is shipping still free Jay?

EVOR · 04-11-2011, 05:46 AM

Yes, it is. Still have few spots left. Totally forgot about this sale.

12-02-2010, 05:16 AM	#46 (permalink)
HATED1 Track Member Join Date: Jan 2009 Location: WA Posts: 504 Drives: 2010-370z-Red-6 SPD Rep Power: 17	Got mine on tonight, I like it! Thanks! However that center bolt just falls out, so I guess I'll just go without it, unless someone knows the exact size __________________ If i can't be loved I might as well be hated... Last edited by HATED1; 12-02-2010 at 05:42 AM.

12-02-2010, 12:43 PM	#48 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	For the guys that have installed this, did it slip on over the exhaust tips, or did you need to remove them to install it? Specifically F.I. Exhaust Tips?? That's my only hesitation with this. And confirm it just slips over the Fog Light, I don't need to remove the foglight prior to putting this on? Thanks! __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

12-02-2010, 01:45 PM	#49 (permalink)
HATED1 Track Member Join Date: Jan 2009 Location: WA Posts: 504 Drives: 2010-370z-Red-6 SPD Rep Power: 17	Alright guys here some tips for the rear diffuser: When you put the 3m tape on the rear diffuser line it up as close as possible to the outer edges on the top, I would suggest doubling (sticking another piece over the existing exposed piece) around the exhaust areas, where it curves around on both sides. If possible, I would suggest the stronger double sided tape mentioned in another thread, I don't know the part number? ~also heat up the carbon piece with the tape on it as well as the surface of the vehicle, i used a space heater, 15 mins before, 20 mins after It was put on with me applying pressure. ~there are 2 screws that need to be hand screwed in, for those of you worried about the damage done to the body, DON'T, these holes are located way inside and are unnoticeable, as well as very small, in fact if you don't like the diffuser for some reason, I don't see a problem taking it off, there will be no visible evidence that it once was there. As long as you can get the tape residue off. ~still waiting on the info for the center bolt, however it does feel secure enough to leave it off ~if you have exhaust tips that are close to the rear bumper, do not get this as it will most likely touch and ruin the diffuser, possibly cause vibrations as well. I do have a berk cbe which fits perfectly around. Hope these tips help __________________ If i can't be loved I might as well be hated...

12-02-2010, 01:47 PM	#50 (permalink)
HATED1 Track Member Join Date: Jan 2009 Location: WA Posts: 504 Drives: 2010-370z-Red-6 SPD Rep Power: 17	Oh and it slips over both the fog light and exhausts, no need to remove any pieces. __________________ If i can't be loved I might as well be hated...

12-02-2010, 07:47 PM	#52 (permalink)
HATED1 Track Member Join Date: Jan 2009 Location: WA Posts: 504 Drives: 2010-370z-Red-6 SPD Rep Power: 17	some pics of mine, and a shot for you XwchriswX you be the judge if it will fit or not __________________ If i can't be loved I might as well be hated...

12-02-2010, 08:10 AM	#47 (permalink)
Csquared Enthusiast Member Join Date: Mar 2010 Location: Hong Kong Posts: 302 Drives: 09 Nissan 370z Y 7sp Rep Power: 15	I'm gonna readjust mine tomorrow over lunch the on the driver side (your passenger side) Keeps slipping off, Gonna add a little more tape to that side. I'm also gonna try to but a bolt in the center, Hate1 if I figure out one that works i'll let you know what size i used.

12-03-2010, 12:00 PM	#54 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	Thanks Hated1, looks like it will have enough clearance. I'm crossin my fingers! lol __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

12-04-2010, 02:33 AM	#55 (permalink)
HATED1 Track Member Join Date: Jan 2009 Location: WA Posts: 504 Drives: 2010-370z-Red-6 SPD Rep Power: 17	I got the bolt but no nut, found a nut, now life is good! __________________ If i can't be loved I might as well be hated...

12-04-2010, 12:57 PM	#56 (permalink)
God-Speed A True Z Fanatic Join Date: Sep 2010 Location: Austin, Tx. Posts: 4,364 Drives: Prototype Rep Power: 2684377	Very Nice, once I get my wheel & tire package taken care of, this will be the next mod!!

12-04-2010, 01:50 PM	#57 (permalink)
atx370z Track Member Join Date: Aug 2010 Location: Austin, TX Posts: 637 Drives: 10 370Z T/S M6 Rep Power: 16	im a little hesitant whether i should pull the trigger on this or not. Can anyone post some shots from the side and angles from farther back from the car. __________________ Berk HFC & CBE, Stillen G3's, AMS Crank Pulley, JWT Flywheel, 4.08 Gears, UpRev, H&R Springs and 20mm Spacers, JDM Rear Fog, EVO-R Front Lip and CF Upper Cover, 305's

02-24-2011, 01:41 PM	#58 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 45	Free shipping is still good to go. In stock! __________________ WWW.EVO-R.NET

04-10-2011, 08:45 PM	#59 (permalink)
karotZ Track Member Join Date: Dec 2010 Location: not found Posts: 723 Drives: on empty tank of gas Rep Power: 15	I know it is mentioned somewhere on the thread about fitment with FI TDX. But has anyone actually tried if it fits? And is shipping still free Jay? __________________ VERTEX \| SUIVAX \| AMUSE \| SSR \| SPARCO \| STILLEN \| FAST INTENTIONS x HKS \| HANKOOK \| NARDI \| NRG \| EVO-R \| ROBISPEC \| SPC

04-11-2011, 05:46 AM	#60 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 45	Yes, it is. Still have few spots left. Totally forgot about this sale. __________________ WWW.EVO-R.NET

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New HKS Exhausts l 370Z l THMotorsports l Free Shipping!!!	THMotorsports	Exhaust/Intake	1584	08-21-2019 01:58 PM
Jim Wolf Technology Clutch/Flywheel Combo w/ Free Accessories!! FREE 3-DAY SHIPPING!	Mike@Czp	Drivetrain/Engine	1059	06-01-2018 12:25 PM
EVO-R 370Z Rear Diffuser	EVOR	Exterior & Interior	502	12-30-2012 11:11 PM
Rear Diffuser 370Z	355890	Exterior & Interior	9	07-01-2009 09:17 PM

GB: EVO-R 370Z Rear Diffuser *Free Shipping*

GB: EVO-R 370Z Rear Diffuser Free Shipping