GB: Carbonsignal Gauges
 

Ok guys here it is limited time GB

We have two kits one for base/nismo and touring Z

Kit ONE:
Comes with 7' screen, HDMI cable, rotary joystick, control module, and optional extra sensor ports 550$
OBDII reader with cable: 90$

Console comes in three finishes and design is simple but without airlift module as in DEMO pics its just the joystick by default.

Console FRP 175$
Console FRP painted matte black 200$
Console CF 450$
Console Wrapped in leather and alcantara additional 150-250$ on top of base price of 175$

Any other module needed installed in the console will be discussed and quoted case by case.

Everything working in the pics and video is only via OBDII, but for boosted guys following are optional sensors needed if any of these readings are needed, oil temp will come with sensor (free). There is a port for these below reading in the module so all what is needed is hooking up the sensors and two or three wires in the module.

NA Gauges pics (Fuel pressure needs sensor mistake in pic)

http://i1124.photobucket.com/albums/...psplyxmbyy.jpg

FI Gauge pic (Fuel pressure needs sensor mistake in pic)

http://i1124.photobucket.com/albums/...psx3zrcaql.jpg

Below are additional sensors incase anyone needs these

Exhaust Gas Temperature (EGT) K-Type thermocoupler probe sensor $76
Oil Temperature Sensor $18
Boost (MAP) Pressure Sensor $50
Intake Air Temperature Sensor $18
Intercooler Air Temperature Sensor $18
Fuel Temperature Sensor $18
Transmission Oil Temperature Sensor $18
Gearbox Oil Temperature Sensor $18
Exhaust Manifold Pressure Sensor $56
Fuel Pressure Sensor $56
Oil Pressure Sensor / Sender $56
AFR (Air Fuel Ratio) Wideband Controller Functionality $210


Kit TWO:

Its for people already with navi screen, kit comes with, rotary joystick, control module, and optional extra sensor ports in the module 420$

OBDII reader with cable: 90$

For Navi screen guys there is not need for screen and buyer will keep all existing functionalities of stock screen like navi, audio etc.
Any optional sensors price as above.

There is a provision to add rear view camera in the screen as well, and all guages can be adjusted for redline

These prices are under a launch offer and GB, lead time is 2-4 weeks and first booked and first delivered.

Shipping for any of the Kits is approximately 50-75$ worldwide

GB will close end of this month



http://i1124.photobucket.com/albums/...psujo4flko.jpg
http://i1124.photobucket.com/albums/...ps5a7qegrn.jpg
http://i1124.photobucket.com/albums/...psc2h8h7g9.jpg
http://i1124.photobucket.com/albums/...psyhism6fu.jpg
http://i1124.photobucket.com/albums/...psesqeygbe.jpg
http://i1124.photobucket.com/albums/...psrtp16ogh.jpg
http://i1124.photobucket.com/albums/...pshfkwmyh3.jpg
http://i1124.photobucket.com/albums/...psmzxmqysd.jpg
http://i1124.photobucket.com/albums/...pskqdgvddu.jpg
http://i1124.photobucket.com/albums/...psxjnyim7z.jpg
http://i1124.photobucket.com/albums/...psxylm3erb.jpg
http://i1124.photobucket.com/albums/...pskdxskfmf.jpg
http://i1124.photobucket.com/albums/...ps28bwliom.jpg
http://i1124.photobucket.com/albums/...pstrfsnurc.jpg

I have a base. I just want the CF bezel to mount a tablet. I don't want any holes for the joy stick or air suspension controls. How much for just that.

Can you post pics of the how the screen mounts to the bezel from behind?

Console is made only for this screen and people will get screen mounted.

For other things please pm us and we can discuss if we can do customization for tablet or not.

I'm in for kit 2 with obd2 reader and cable

For us with the factory navi, does the OEM function still work? Thanks.

Yes it will works as is this is all additional

Any pic installed in a car with navi? Thanks.

As module output currently is HDMI only and in Z it's AV so we will prepare it once GB finishes. It should be exactly same just need to run it will have to go to on aux output

Any photos of the other finishes? I love CF but would prefer to look as oem as possible.

edit: also, how many optional sensors can be added?

Just saw the video and it looks awesome. I assume one can change the temperature readings from C to F? Also, are all the readings in the video taken from the OBDII port? If so, does it have to plug into the port from the normal location under the dash? Can you show us any pictures of how this looks like? Any install pics so we know how difficult a process this will be to install?

Thanks. Very interested.

interested in option 2. How does it hook up and work with the stock Nav?

I'm in where do I sign up? Option 1

Sent from my SAMSUNG-SGH-I527 using Xparent BlueTapatalk 2

Can you elaborate on the software that kit one comes with? Would I need anything else other than kit one and the console to get this up and running in my base? Very interested, thanks.

Install info would be very helpful as well, it's this something I can do in my garage with simple tools?

100% in for kit one. Money ready! Just figuring out the additional sensors wanted

So, If I wanted option 1 for a nismo ...

Comes with 7' screen, HDMI cable, rotary joystick, control module, and optional extra sensor ports 550$
OBDII reader with cable: 90$
Boost (MAP) Pressure Sensor $50
Fuel Pressure Sensor $56
AFR (Air Fuel Ratio) Wideband Controller Functionality $210
Console Wrapped in black alcantara addtional $175

total price = $1,131 plus shipping ? I'm in.

Are install instructions included

dang 450 for cf? kit still looks nice! where to sign up??

you know I'm down :)

Guys write all questions will be replying all soon :)

Kit 1:
$550 - 7" Screen Setup
$90 - OBD II
$200 - FRP Matte Black
$50 - Boost Pressure Sensor
$210 - AFR Wideband Controller Functionality
$56 - Fuel Pressure

Total: $1,156 plus shipping.

Im In!!!!

I think you need to add another $175 for the base FRP panel.


Sent from my iPhone using Tapatalk

Looks sweet. I want one but would have to relocate my boost controller

These look amazing! Have you guys done any applications for the G37?

So I have Navi is the outright price total 450 for CF AND 90 for the cord and that's it? Or is there additional charges. Just a lil confused. Im interested in option 2. Thank you!

Get boost too... cause you know its going to happen haha

Question
 

So I have an armytrix exhuast system that requires me to plug into the OBD2 port. Is there a way to have both of the OBD2 modules plug in?

question.. for the AFR (Air Fuel Ratio) Wideband Controller Functionality.. is that just to read afr for bank 1 and 2 or u can adjust it with that option? and for oil pressure .. how much psi it reads up to? also can we arrange the gauges in the order we want?

Interested in option 2 with all sensor except wideband ans boost.

What brand are the sensors? Any warranty?
Where do you guys plan on mounting the controls for the navi option.

Kit 1:
$550 - 7" Screen Setup
$90 - OBDII
$150-250 Leather, silver stitching (Does this match our interior?)
$18 - Intake Air Temperature Sensor (Doesn't the ODBII already do this?)

I use PLX Kiwi with Dash Command now, and I get Intake Air Temp from it, so is the $18 sensor needed with kit 1?

I'd like to see a leather wrapped screen setup, any pics?

Is the Carbon Signal badge above the rotary dial optional?

I'm defiantly in.

The suspense is killing me!

Sent from my SM-G925T using Tapatalk

Wondering since I have Navi. Do I lose all my control dials that sit right in front of the screen?

no, you wont be using the bezel he made just the interface to plug into the existing nav.

Ok guys replied all questions below and updated first post with more pictures

No pictures at the moment but will be posting soon FRP painted black option rest leather and alcantara once someone order we will do it and post pic

You can have upto 8 optional sensors in addition to all OBDII ones

Answer to F or C temp yes will be offered in both

Yes connects via a cable to OBDII under the dash

Installation pictures dont have as had one demo car and its installed but items will come with installation instructions.

The piece we have made bolts on same place as stock one so its easy install and screen comes already mounted.

There is a module which need small wiring job for power and have to connet the provided cable to hook to OBDII port

List below, and pm email for the invoice


no tools needed just need to hook up some wires and instructions will come with it can be done at home.

Yes included.

For AFR, there is always reading from both bank, if needed to add aftermarket you should know there are two sensors needed, if already has any aftermarket that one can be hooked to the screen module so no need for AFR wideband

Below list and pm me email with whats needed for invoice

Send us the boost controller we can install where airlift controller is

Kit no 2 can be installed in G37 ready to go

In KIT 2 there is no console just a module and cable, you should be ok just with that

No you need to have the port empty for this to run

it will read upto 180psi

this AFR both are coming via OBDII, all individual gauges can be adjusted for custom redline

Just check if you really need all sensors and pm me with details and email address

You need to find a place yourself to mount the joystick its a small piece can be placed anywhere with a small hole.

Warranty is for one year, with return shipping covered.

all the readings as in the pics are form OBDII, only pressure ones arent there, but we offer more incase anyone wants to add aftermarket ones.

You should be able to read from your PLXI

Carbonsignal badge is there in all consoles by default.

Leather wrapped as said will be posted once anyone order it, we dont have it ready at the moment.

No you wont loose any.

You might need to disable the handbrake signal as video option stops working once car is moving so need to disable that to make module signals work in moving car, easy job.

Please for all interested write your name below and pm us email address along with all options needed. We will be shipping these in the order these are paid for.

GB so far
1)CarbonZ, Kit 1, Cf console, extra sensors
2)Max Flores Kit 1, Cf console, airlift cutout, extra sensors
3) Mike Mixon Kit 2
4) Yushi Shirai, Kit 1, Cf console,
5) Mattew Shelton Kit 1, Cf console,
6)
7)
8)
9)
10)

Put me down for kit 1, frp console

Sent from my SM-G925T using Tapatalk

How do I switch between Nav and the OBDII reader? Even with my Navi controls I still need to install and use the knob provided for your software?


Sent from my iPhone using Tapatalk

Kit will go on AUX so it's like switching from AUX we tried in G but haven't got hold of Z yet. You might need to delete the brake wire

Thanks for the response to all the questions. I have a few things I am still not clear on...

Can you arrange the screens to display only the outputs you want (e.g. Can I have a screen with: boost, oil pressure, fuel pressure and AFR) or are the in a predetermined layout that cannot be changed by the end user?

Can you plug anything in to the HDMI and have it displayed on the screen?

Will the matte black FRP match the interior (more or less)?

What's the cost of the oil pressure sensor?

Thanks!

I am 100% sure I will spend 30 minutes playing with it once its installed lol.

Put me down for the kit.

Ah **** I'm in aswell kit 2

I have not used the AV inputs in my car yet with the stock nav.
So when you switch to the video screen to use this, with stock nav you wont be able to listen to music just due to how the stock system is setup?