ECU reset going into winter

GTRFAN · 05-04-2010, 07:04 PM

I've noticed my idle has changed a bit recently as the air is a lot cooler now going into winter. The air temp this morning was 10deg at my place in the SE Melb.

I want to reset the ECU and let it re-learn.

Evan, whats your secret pedal pressing technique for the reset?

evse82 · 05-04-2010, 07:54 PM

This is what I do.... timing needs to be perfect and if you start the car and the CEL is blinking at random times, just turn the car off and start it again, it should be ok then. It is from the 350z but works the same on the 370.

1.Confirm that accelerator pedal is fully released, turn ignition switch to accessory and wait 3 seconds.

2.Repeat the following two procedures quickly five times within 5 seconds:

1.Fully depress the accelerator pedal (HARD).
2.Fully release the accelerator pedal.

3.Wait 7 seconds, fully depress the accelerator pedal and keep it for approx. 10 seconds until the CEL starts blinking.

4.Fully release the accelerator pedal (while the CEL is still blinking)

5.Wait about 10 seconds.

6.Fully depress the accelerator pedal and keep it for more than 10 seconds.

7.Fully release the accelerator pedal (The CEL light will continue to blink).

8.Turn ignition switch to start and now you can start the car. The CEL light should be gone.

GTRFAN · 05-05-2010, 06:02 AM

thanks

05-04-2010, 07:04 PM	#1 (permalink)
GTRFAN Track Member Join Date: Dec 2008 Location: Melbourne Posts: 586 Drives: 370z Titanium 6MT Rep Power: 17	ECU reset going into winter I've noticed my idle has changed a bit recently as the air is a lot cooler now going into winter. The air temp this morning was 10deg at my place in the SE Melb. I want to reset the ECU and let it re-learn. Evan, whats your secret pedal pressing technique for the reset? __________________ My Zed

05-05-2010, 06:02 AM	#3 (permalink)
GTRFAN Track Member Join Date: Dec 2008 Location: Melbourne Posts: 586 Drives: 370z Titanium 6MT Rep Power: 17	thanks __________________ My Zed

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ECU Reset	spearfish25	Engine & Drivetrain	15	05-08-2012 11:01 AM
WTB: Winter snow tires or winter rims/tires	zcoupe09	Parts for sale (Private Classifieds)	3	12-21-2009 09:17 PM
How do i reset the TPMS?	Zeto	Wheels & Tires	16	11-14-2009 09:05 AM
how do i reset my car??	RaY d M	DIY Section (Do-It-Yourself)	8	10-25-2009 02:49 PM
ECU reset vs. ECU learn	gpa7pk	Intake/Exhaust	5	08-09-2009 09:28 PM

05-04-2010, 07:54 PM	#2 (permalink)
evse82 Track Member Join Date: Nov 2008 Location: Melbourne, AUS Posts: 609 Drives: Black 370z MT Rep Power: 18	This is what I do.... timing needs to be perfect and if you start the car and the CEL is blinking at random times, just turn the car off and start it again, it should be ok then. It is from the 350z but works the same on the 370. 1.Confirm that accelerator pedal is fully released, turn ignition switch to accessory and wait 3 seconds. 2.Repeat the following two procedures quickly five times within 5 seconds: 1.Fully depress the accelerator pedal (HARD). 2.Fully release the accelerator pedal. 3.Wait 7 seconds, fully depress the accelerator pedal and keep it for approx. 10 seconds until the CEL starts blinking. 4.Fully release the accelerator pedal (while the CEL is still blinking) 5.Wait about 10 seconds. 6.Fully depress the accelerator pedal and keep it for more than 10 seconds. 7.Fully release the accelerator pedal (The CEL light will continue to blink). 8.Turn ignition switch to start and now you can start the car. The CEL light should be gone.