Audio issues - Bose

Aescen · 08-23-2014, 06:56 PM

So I'm putting my aftermarket HU in today and after the harness and goodies were all soldered and heat shrinked and looking great I ran into some problems.

I'm using the 70-7533 metra harness with a ISVE61 LOC, and ASWC-1 SWC. My problem right now is that it sounds like sound is only coming through on the driver side. The right side of the vehicle has no output. Has anyone run into this with the Bose systems before?

Edit: It's actually just the front passenger side. When I set my balance all the way right and front fade you hear pretty much nothing. Set right mid fade and you can still hear the rear.

Aescen · 08-24-2014, 12:04 PM

Update: I fear I've blown out the Bose amp, everything is acting silly now. Front driver dash/door speakers are super loud compared to everything else. I've swapped my LOC to no difference. Does anyone have the Bose amp location and pinout information on hand? I'm probably going to rip it all out now.

bigaudiofanat · 08-24-2014, 09:17 PM

i would say pull it all out and start fresh it's a lot easier that way. Those amps fail a lot not to mention their speakers.

Aescen · 08-24-2014, 10:22 PM

That's the plan, friend. Need to order in my sub enclosure and my component speakers first, everything else is chillin in the garage from the last car. I could use a hand with the amp removal and bypass though *wink wink*

bigaudiofanat · 08-24-2014, 10:34 PM

I'm down for it

Aescen · 08-24-2014, 10:44 PM

I'll give you a holler once I get the rest of my stuff to set something up.

Until then let this thread serve as a reminder to all future Z owners that Bose is garbage.

08-23-2014, 06:56 PM	#1 (permalink)
Aescen Base Member Join Date: Jul 2014 Location: Pennsylvania Posts: 103 Drives: 09 Nissan 370Z MB M6 Rep Power: 11	Audio issues - Bose So I'm putting my aftermarket HU in today and after the harness and goodies were all soldered and heat shrinked and looking great I ran into some problems. I'm using the 70-7533 metra harness with a ISVE61 LOC, and ASWC-1 SWC. My problem right now is that it sounds like sound is only coming through on the driver side. The right side of the vehicle has no output. Has anyone run into this with the Bose systems before? Edit: It's actually just the front passenger side. When I set my balance all the way right and front fade you hear pretty much nothing. Set right mid fade and you can still hear the rear. __________________ '09 Touring +Sport 6MT Nismo Black Aluminum Shift Knob - Custom Audio Build Last edited by Aescen; 08-23-2014 at 08:35 PM. Reason: Update

08-24-2014, 12:04 PM	#2 (permalink)
Aescen Base Member Join Date: Jul 2014 Location: Pennsylvania Posts: 103 Drives: 09 Nissan 370Z MB M6 Rep Power: 11	Update: I fear I've blown out the Bose amp, everything is acting silly now. Front driver dash/door speakers are super loud compared to everything else. I've swapped my LOC to no difference. Does anyone have the Bose amp location and pinout information on hand? I'm probably going to rip it all out now. __________________ '09 Touring +Sport 6MT Nismo Black Aluminum Shift Knob - Custom Audio Build

08-24-2014, 09:17 PM	#3 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	i would say pull it all out and start fresh it's a lot easier that way. Those amps fail a lot not to mention their speakers. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

08-24-2014, 10:22 PM	#4 (permalink)
Aescen Base Member Join Date: Jul 2014 Location: Pennsylvania Posts: 103 Drives: 09 Nissan 370Z MB M6 Rep Power: 11	That's the plan, friend. Need to order in my sub enclosure and my component speakers first, everything else is chillin in the garage from the last car. I could use a hand with the amp removal and bypass though wink wink __________________ '09 Touring +Sport 6MT Nismo Black Aluminum Shift Knob - Custom Audio Build

08-24-2014, 10:34 PM	#5 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	I'm down for it __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

08-24-2014, 10:44 PM	#6 (permalink)
Aescen Base Member Join Date: Jul 2014 Location: Pennsylvania Posts: 103 Drives: 09 Nissan 370Z MB M6 Rep Power: 11	I'll give you a holler once I get the rest of my stuff to set something up. Until then let this thread serve as a reminder to all future Z owners that Bose is garbage. __________________ '09 Touring +Sport 6MT Nismo Black Aluminum Shift Knob - Custom Audio Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
audio build for bose/nav... JL Audio	snowsurfdirtx	Audio & Video	3	05-07-2013 01:51 AM
Who needs a BOSE audio system anyway???	Zoren 370	Other Vehicles	3	08-23-2012 05:37 AM
[FOR SALE] Bose audio system	fonZie	Parts for sale (Private Classifieds)	8	02-09-2012 11:22 PM
Any issues removing factory Bose system?	Juleous	Audio & Video	1	08-25-2010 01:24 PM
Audio and electrical issues at only 225 miles	getawaydriver	Audio & Video	13	02-27-2010 08:20 AM