ipod mount for 370

texmedic · 09-24-2009, 09:51 PM

Hey guys, anyone remember that ipod mount for the 370 someone posted a while back. I've searched using ipod and mount as key words, but I remember some of you had heard of the company. It mounted to the side of the radio and appeared to be alluminum. Thanks....

texmedic · 09-24-2009, 09:55 PM

And after I posted I tried searching mounting bracket and found it. Proclip.... I swear I'm never gonna get OG status. When lord, whens gonna be my time?

Nick911sc · 09-24-2009, 10:01 PM

Haha, I was just about to post the link to the thread for you. Good job

Anyway since I don't have the nav I just keep my ipod in the cubby and run the wire out the side since theres just alittleeee space that the wire fits.

texmedic · 09-24-2009, 10:19 PM

Thanks bro, I thought about that as well. I was using my old nano and I had a mount that fit the cup holder, but it had too little memory. So I picked up a touch for the car. Those proclips are uh whats the word..... Priiicccceeyyyyy! so says the guy who just bought a touch huh?

Zeto · 09-25-2009, 11:17 AM

What I did was use a piece of velcro on my Itouch and on the door on the center compartment. It works pretty well.

kenchan · 09-25-2009, 03:39 PM

proclip?

Aftermarket Dash Mounts - ProClip

billydsz · 09-25-2009, 04:27 PM

Nice but I don't see how the mounting an Ipod in either place is going to be any good if you are using the Bose/Nav. The input cable for the Bose/Nav system is very short and the input connector is in the center console by the driver's elbow. I guess you'd have to get a special long cable made.

Mounting a phone in the upper left would be nice, but there are no power adapters anywhere nearby that location, so more special wiring would be required for that location.

kenchan · 09-25-2009, 04:32 PM

oh... i have the poorman's Base so did not know.

spearfish25 · 09-25-2009, 07:12 PM

I have the proclip mounted on the right side of the center console. With the touring Bose packages (no nav) it's conveniently close to the Aux jack and the 12v power. The Proclip is awesome.

kenchan · 09-25-2009, 08:23 PM

texmedic · 09-26-2009, 08:52 AM

I ended up ordering the proclip for the console. it was just a cleaner look I thought and that power oultet is there as well. I was using that power outlet in the center console when I had my nano on a cup holder mount. It was great for the ipod but I kept the mount in there all the time for pure convience sake and never had a place to put my sodey pop! Plus if I put it in the space where the nav would go I couldnt skip around on ye olde ipod as much.

texmedic · 09-26-2009, 08:57 AM

Hey Zeto, I know I'm hijacking my own thread but MAN I dig those vents you put in! I remember reading your thread about it. Did you ever say whether other places are doing the same technique? Didnt you say there was no heat from cutting? I needs the 411 brudda!

Zeto · 09-26-2009, 03:29 PM

Quote:

Originally Posted by texmedic

Hey Zeto, I know I'm hijacking my own thread but MAN I dig those vents you put in! I remember reading your thread about it. Did you ever say whether other places are doing the same technique? Didnt you say there was no heat from cutting? I needs the 411 brudda!

Hey Tex, as far as I know my guy is the only one that does them. He's almost done with the DIY. As far as heat is concerned the heat release is minimal, HOWEVER, I haven't experienced anything over 220F with hard driving on 90 degree days since they were installed.
As soon as he's done I'll post it up.

texmedic · 09-26-2009, 07:40 PM

I added to your rep power solely on your vents and secondly on your diy and thirdly, well there is no thirdly!

Zeto · 09-26-2009, 08:25 PM

Quote:

Originally Posted by texmedic

I added to your rep power solely on your vents and secondly on your diy and thirdly, well there is no thirdly!

Thanks!

09-24-2009, 09:51 PM	#1 (permalink)
texmedic Base Member Join Date: Jun 2009 Location: Austin Texas Posts: 192 Drives: 09 370Z Rep Power: 16	ipod mount for 370 Hey guys, anyone remember that ipod mount for the 370 someone posted a while back. I've searched using ipod and mount as key words, but I remember some of you had heard of the company. It mounted to the side of the radio and appeared to be alluminum. Thanks....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
can i use my ipod in the car??	niznizbobo	Nissan 370Z General Discussions	1	09-05-2009 11:33 AM
ipod interface; does this charge the ipod as well?	raps101	Exterior & Interior	7	06-20-2009 01:10 AM
IPOD Port?	kannibul	Nissan 370Z General Discussions	1	06-14-2009 10:37 AM
ipod interface won't charge ipod	fly yellow	Audio & Video	11	05-25-2009 09:48 AM

09-24-2009, 09:55 PM	#2 (permalink)
texmedic Base Member Join Date: Jun 2009 Location: Austin Texas Posts: 192 Drives: 09 370Z Rep Power: 16	And after I posted I tried searching mounting bracket and found it. Proclip.... I swear I'm never gonna get OG status. When lord, whens gonna be my time?

09-24-2009, 10:01 PM	#3 (permalink)
Nick911sc A True Z Fanatic Join Date: Feb 2009 Location: Long Island, New York Posts: 1,698 Drives: 2010 Nissan GT-R Rep Power: 20	Haha, I was just about to post the link to the thread for you. Good job Anyway since I don't have the nav I just keep my ipod in the cubby and run the wire out the side since theres just alittleeee space that the wire fits.

09-24-2009, 10:19 PM	#4 (permalink)
texmedic Base Member Join Date: Jun 2009 Location: Austin Texas Posts: 192 Drives: 09 370Z Rep Power: 16	Thanks bro, I thought about that as well. I was using my old nano and I had a mount that fit the cup holder, but it had too little memory. So I picked up a touch for the car. Those proclips are uh whats the word..... Priiicccceeyyyyy! so says the guy who just bought a touch huh?

09-25-2009, 11:17 AM	#5 (permalink)
Zeto Track Member Join Date: Apr 2009 Location: North NJ Age: 40 Posts: 766 Drives: 09 Pearl White 370Z Rep Power: 267	What I did was use a piece of velcro on my Itouch and on the door on the center compartment. It works pretty well.

09-25-2009, 03:39 PM	#6 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	proclip? Aftermarket Dash Mounts - ProClip

09-25-2009, 04:27 PM	#7 (permalink)
billydsz Enthusiast Member Join Date: Aug 2009 Location: New Bern Posts: 252 Drives: 9 370z SptCp SRd 7AT Rep Power: 16	Nice but I don't see how the mounting an Ipod in either place is going to be any good if you are using the Bose/Nav. The input cable for the Bose/Nav system is very short and the input connector is in the center console by the driver's elbow. I guess you'd have to get a special long cable made. Mounting a phone in the upper left would be nice, but there are no power adapters anywhere nearby that location, so more special wiring would be required for that location.

09-25-2009, 04:32 PM	#8 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	oh... i have the poorman's Base so did not know.

09-25-2009, 07:12 PM	#9 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1856	I have the proclip mounted on the right side of the center console. With the touring Bose packages (no nav) it's conveniently close to the Aux jack and the 12v power. The Proclip is awesome.

09-25-2009, 08:23 PM	#10 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521

09-26-2009, 08:52 AM	#11 (permalink)
texmedic Base Member Join Date: Jun 2009 Location: Austin Texas Posts: 192 Drives: 09 370Z Rep Power: 16	I ended up ordering the proclip for the console. it was just a cleaner look I thought and that power oultet is there as well. I was using that power outlet in the center console when I had my nano on a cup holder mount. It was great for the ipod but I kept the mount in there all the time for pure convience sake and never had a place to put my sodey pop! Plus if I put it in the space where the nav would go I couldnt skip around on ye olde ipod as much.

09-26-2009, 08:57 AM	#12 (permalink)
texmedic Base Member Join Date: Jun 2009 Location: Austin Texas Posts: 192 Drives: 09 370Z Rep Power: 16	Hey Zeto, I know I'm hijacking my own thread but MAN I dig those vents you put in! I remember reading your thread about it. Did you ever say whether other places are doing the same technique? Didnt you say there was no heat from cutting? I needs the 411 brudda!

09-26-2009, 07:40 PM	#14 (permalink)
texmedic Base Member Join Date: Jun 2009 Location: Austin Texas Posts: 192 Drives: 09 370Z Rep Power: 16	I added to your rep power solely on your vents and secondly on your diy and thirdly, well there is no thirdly!