Can we start a STICKY for install materials needed?
 

I thought that we should start on a sticky for what is needed for an install since this is a new car model.

Items listed would be for:

1. Antenna adapter and if there are different brands other than Metra
Scosche NAA2B 2007 - Up Nissan Versa Antenna Adapter

2. Wiring harness adapters to for stock harness
Scosche NN04B 2007 - Up Nissan Radio Wiring Harness

3. Steering wheel adapter module
4. Single din mounting hardware.
5. Any other??

I been searching the threads and this would be a good start off and if people could mention where they bought it for and how much, it would help businesses too..

Im going to do my shopping on ebay with posted info..

if you're doing a double din you can use the base factory trim...
no need for the metra kit.

you're going to need a T20 torx screw driver.

also probably recommend you get some EZ felt from some artsy
store just in case you got a gap between your factory stereo facia
and the factory trim. :)

i also solder all my connections so you'll need a soldering gun,
solder, and some e-tape.

if you want to make a video bypass switch, you'll need to get a
normally closed momentary push-switch. you'll also want to
have a drill/drill bit to install your push switch.