Engine Noise :(

bigaudiofanat · 11-03-2009, 10:17 AM

I am trying to help this guy and sent a link to him to help with the problem. It is not a install error as it is known threw the industry as a problem.

Anyway, I would still relocated your ground wire for the head unit to another place the factory ground can sometimes be the problem. Also you said that you did not see where I put the ground for the amp in my installs. Here is where I put mine.

jrniehaus · 11-03-2009, 10:51 AM

cool, thanks for the picture. I must have missed it. I grounded mine to the other bolt to the left of that one. And I am going to ground the head unit on my next day off. If that don't work, then I guess Ill try grounding the Rca's which may be a bit difficult because on my HU it has an accesory plug in that converts the plug to an Rca which isn't as easy as wrapping the wire around the rca's. May have to run the wires around the outside of them and use electrical tape or heat shrink tube or something to hold it in place. My other questions are if it is ok to have the speaker leads going to the front, side by side with the Rca's and remote on lead. And as for the hiss noise that is generated from the amp? Or is that normal.

P.S. Sorry for all the questions, don't mean to be annoying. I just tend to have many questions, haha.

ConchZ2 · 11-04-2009, 07:57 PM

Quote:

Originally Posted by bigaudiofanat

I am trying to help this guy and sent a link to him to help with the problem. It is not a install error as it is known threw the industry as a problem.

Anyway, I would still relocated your ground wire for the head unit to another place the factory ground can sometimes be the problem. Also you said that you did not see where I put the ground for the amp in my installs. Here is where I put mine.

It IS an install error as I stated..........

just saying

11-04-2009, 08:14 PM

Quote:

Originally Posted by ConchZ2

It IS an install error as I stated..........

just saying

Only install error is a fist thats not installed in your FACE

Why dont you leave him alone instead of stalking him on here all the damn time?

ConchZ2 · 11-04-2009, 08:17 PM

Quote:

Originally Posted by blue660r01

Only install error is a fist thats not installed in your FACE

Why dont you leave him alone instead of stalking him on here all the damn time?

another good BOY from the hood..............

just saying

11-03-2009, 10:17 AM	#1 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	I am trying to help this guy and sent a link to him to help with the problem. It is not a install error as it is known threw the industry as a problem. Anyway, I would still relocated your ground wire for the head unit to another place the factory ground can sometimes be the problem. Also you said that you did not see where I put the ground for the amp in my installs. Here is where I put mine. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/ Last edited by bigaudiofanat; 11-03-2009 at 10:23 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1st gear noise	rench	Engine & Drivetrain	105	12-21-2012 10:48 PM
Rear End Noise	bradz	Nissan 370Z General Discussions	18	06-23-2011 05:04 PM
Noise issues	nuts4nissan09	New 370Z Owner	5	08-27-2009 12:46 PM
G37 engine and 370z engine	kannibul	Nissan 370Z General Discussions	21	08-12-2009 01:58 AM
Tire Noise	dwhitley0381	Nissan 370Z General Discussions	0	06-11-2009 09:34 AM

11-03-2009, 10:51 AM	#2 (permalink)
jrniehaus Base Member Join Date: Oct 2009 Location: Phx,AZ Posts: 45 Drives: 370z 6spd sport mdl Rep Power: 16	cool, thanks for the picture. I must have missed it. I grounded mine to the other bolt to the left of that one. And I am going to ground the head unit on my next day off. If that don't work, then I guess Ill try grounding the Rca's which may be a bit difficult because on my HU it has an accesory plug in that converts the plug to an Rca which isn't as easy as wrapping the wire around the rca's. May have to run the wires around the outside of them and use electrical tape or heat shrink tube or something to hold it in place. My other questions are if it is ok to have the speaker leads going to the front, side by side with the Rca's and remote on lead. And as for the hiss noise that is generated from the amp? Or is that normal. P.S. Sorry for all the questions, don't mean to be annoying. I just tend to have many questions, haha.