Amp mounting location

Nillaz

Has anyone attempted to mount an amp directly to the plastics behind the seat (just below the rear brace)? I'm a little concerned about mounting an 8 - 9 lb amp in this location but I'm curious about the experience of others.

SouthArk370Z

I vaguely recall someone posting pics of doing that but it may have been mounted on the lower section of that panel, closer to the floor.


Edit: I don't remember what "someone" did but I'd glue a piece of plywood to the back side of the plastic and then screw/bolt the amp onto the plywood. The weight of the amp is on the plywood which spreads out the load on the plastic and minimizes flexing.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

brancky3

Depending on your amp you may be able to place it in the stock amp location.

__________________

Nillaz

Excellent suggestion on reinforcing the back, and if I do end up mounting in this location I'll do just that.

The more I think about it though the less inclined I am to use this spot though. It seems ideal because it's largely wasted space...but I'm concerned that in the event of an accident an amp that isn't well secured to the body could possibility become a projectile. I enjoy killer audio, but not in that way!

I still have a few days before i start the install, so I guess I'll kick it around in my head some more.

pfdaxe

This is where I mounted my amps and Line Output Converter:

__________________
Build Thread: http://www.the370z.com/members-370z-...xes-build.html

Nillaz

Where you have your LOC is where I was considering mounting but looking at your pic the location of your lower amp seems like a better option.

Any issues with hitting your seat, or with wires being pinched where you fed them under the trim?

pfdaxe

No issues with wires being pinched. It all depends how tall you are or how far back you put your seat. Mine is pretty close.

__________________
Build Thread: http://www.the370z.com/members-370z-...xes-build.html

SouthArk370Z

That panel seems pretty substantial to me. Use a backing plate of some sort (Al should work well, also) that is glued to the plastic (rubber cement?) and make sure the amp is secured to the plate. Should stay put in any wreck that you would live through if you do it right. You might want to add some screws/washers (wrinkle finish black paint should blend in well) around the edge of the plate to further secure the plate, keep it in contact with the glue, and help spread the load.

Edit: I would avoid mounting an amp near the floor and behind the seat. Too easy to block air flow. YMMV

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

H2O_Doc

Nillaz

This is a good point...particularly since this is the first time I've ever used an Arc amp and I am unfamiliar with their ventilation requirements.

Nillaz

This was my first choice and I discarded it. It's perfectly suited for an amp...unless you want/need to make adjustments after the install is complete.

H2O_Doc

Like Ron for from Ronco says "just set it and forget it."

I can get to the amp in about 2 minutes. Not as convenient as mounting it on,say, the steering wheel, but 2 minutes isn't too long.

Nillaz

Now this is an idea that I feel should be further explored!

chops

i installed my amp under the passenger seat

brutusvk

That's what they make remote controls for.