![]() |
Axxess Wiring Help, Bose Without Nav....
.
|
.
|
.
|
You could call their help line. I'm sure you're not the only person that's had this issue. Personally those things are a pain in the *** period. I'd rather buy a stereo with a built in programmable SWC. Much easier than programming a PAC or AXCESS controller.
|
.
|
There is a sticky above for the axxxess......That may help you.
|
.
|
Quote:
GL with the axxess... :ugh: i would check with Bigaudiofanat for his insight. he knows how to get them working on the Z. you might need to update your firmware first though. |
I did the prep work: updated the firmware & wired it up according to their diagram. Then the real work started: pressing sequences of buttons & swearing for ~20 minutes. Did the exact same sequence of this button, that button, wait for these flashes. Went through it time after time & finally it just worked. Might or might not be able to get another one working. I'm almost positive it's dependent on how the planets are aligned at the time of programming.
But it works like a charm now. Volume up/down, track up/down, source change. |
Double check the pin #'s, and don't rely solely on wire colors. Never hurts to check the basic stuff first.
|
.
|
Quote:
|
if axxess works the way it's advertised then it's less steps than the pac, but since people need to post up they are having issues, then that's a extra step right there..
pac is old and mature... but it works the first time. |
Quote:
Now stuff it back in the dash & forget about it. Every once in a while you'll turn the volume up or go to the next track & appreciate how much work went into making that happen :tup: |
.
|
All times are GMT -5. The time now is 07:11 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2