Car Speed Signal, Illumination, Reverse wires!?

bigaudiofanat · 10-22-2009, 06:04 AM

It is not on the scosche harness that you have to do it, it is on the pioneer harness you have to do it FOR PIONEERS ONLY.

All others you just ground the lime green wire to any metal that is part of the car as long as that metal is not attached to plastic.

Sigur · 10-22-2009, 09:09 AM

Yes. You have to add a pin to a blank spot in the pioneer harness and ground to bypass. I had already done this 5 years ago when I first put this head unit in my old Subaru. What I was saying is the scocshe harness does not have a wire at pin 18 for the speed signal. So you can remove a unused wire like a rear speaker wire and use them for speed or SW controls etc.

Mike · 10-22-2009, 09:15 AM

yea, there were a couple wires missing from the scosche harness that I needed. Nothing that cannibalizing from a second one couldn't cure though.

bigaudiofanat · 10-22-2009, 10:22 AM

Quote:

Originally Posted by Sigur

Yes. You have to add a pin to a blank spot in the pioneer harness and ground to bypass. I had already done this 5 years ago when I first put this head unit in my old Subaru. What I was saying is the scocshe harness does not have a wire at pin 18 for the speed signal. So you can remove a unused wire like a rear speaker wire and use them for speed or SW controls etc.

Got ya

vipor · 10-22-2009, 10:25 AM

http://www.liquidc4.net/files/DEI_2009_Nissan_370Z.pdf

Someone was nice enough to obtain this and post a link on another forum I found, so I'll share it with you guys. Please don't screw up your cars

Sigur · 10-22-2009, 12:46 PM

Quote:

Originally Posted by vipor

http://www.liquidc4.net/files/DEI_2009_Nissan_370Z.pdf

Someone was nice enough to obtain this and post a link on another forum I found, so I'll share it with you guys. Please don't screw up your cars

Nice, Thanks for sharing that.

SlikNik · 10-22-2009, 02:11 PM

Here is a video I saw on youtube showing the Pioneer Avic Z110 bypass
YouTube - Avic-Z110bt bypass

Gmendez · 11-08-2010, 11:53 PM

Pioneers do not need an antenna adapter, right???

bigaudiofanat · 11-09-2010, 04:16 PM

ALL RADIOS NEED ADAPTER for connection to the z.

10-22-2009, 06:04 AM	#31 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	It is not on the scosche harness that you have to do it, it is on the pioneer harness you have to do it FOR PIONEERS ONLY. All others you just ground the lime green wire to any metal that is part of the car as long as that metal is not attached to plastic. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

10-22-2009, 09:15 AM	#33 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	yea, there were a couple wires missing from the scosche harness that I needed. Nothing that cannibalizing from a second one couldn't cure though. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

10-22-2009, 10:25 AM	#35 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	http://www.liquidc4.net/files/DEI_2009_Nissan_370Z.pdf Someone was nice enough to obtain this and post a link on another forum I found, so I'll share it with you guys. Please don't screw up your cars __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

11-08-2010, 11:53 PM	#38 (permalink)
Gmendez Base Member Join Date: Mar 2010 Location: Miami, FL Posts: 114 Drives: '10 PW 370Z NISMO Rep Power: 15	Pioneers do not need an antenna adapter, right??? Last edited by Gmendez; 11-09-2010 at 12:49 PM.

11-09-2010, 04:16 PM	#39 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	ALL RADIOS NEED ADAPTER for connection to the z. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

10-22-2009, 09:09 AM	#32 (permalink)
Sigur Base Member Join Date: Sep 2009 Location: Houston, TX Posts: 92 Drives: 09 370Z BS M6 Rep Power: 16	Yes. You have to add a pin to a blank spot in the pioneer harness and ground to bypass. I had already done this 5 years ago when I first put this head unit in my old Subaru. What I was saying is the scocshe harness does not have a wire at pin 18 for the speed signal. So you can remove a unused wire like a rear speaker wire and use them for speed or SW controls etc.

10-22-2009, 02:11 PM	#37 (permalink)
SlikNik Enthusiast Member Join Date: May 2009 Location: Florida Posts: 294 Drives: 2015 Corvette Z51 Rep Power: 18	Here is a video I saw on youtube showing the Pioneer Avic Z110 bypass YouTube - Avic-Z110bt bypass

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
For those wanting a reverse camera	Aus370z	Australia/New Zealand	30	09-08-2009 02:23 AM
Anyone in QLD had the reverse camera put in?	Aus370z	Australia/New Zealand	10	08-01-2009 07:53 PM
Where do door and dash speaker wires split on base system???	LattimerII	Audio & Video	6	07-20-2009 11:23 PM
Reverse Wire for Backup Cam	bpd138	Audio & Video	4	05-05-2009 06:56 PM
Tach signal on the z370's ICU	pulgoso33	Track / Autocross / Drifting / Dragstrip	0	04-15-2009 08:58 PM