Is this setup OK?

Graybullet · 09-03-2009, 02:05 AM

Quote:

Originally Posted by rreign

Congrats on the new Prem member man. I see you're military then? What branch? I do all the car audio installs in and around the base now. (I'm a Marine on PI, formerly at Lejeune) Hit me up.

Thanks! This site well worth it for the Prem membership. I'm in the Air Force here in HI. I actually workout all the time at MCBH.

Graybullet · 09-03-2009, 02:06 AM

Quote:

Originally Posted by bigaudiofanat

Please feel free to ask as many questions as you think you need to ask. If you want to ask them in private for some reasons you can always PM me.

Thanks! You've been more than helpful and thanks for being patience

rreign · 09-03-2009, 08:36 AM

Quote:

Thanks! This site well worth it for the Prem membership. I'm in the Air Force here in HI. I actually workout all the time at MCBH.

Do doubt that it's worth it! Enjoy the site and the people bro. The big audio guys on the forum are Matt, Jeff Smith and myself for the most part. There are aome others out there but we're the "big 3" if you will. Just let us know if you need anything at all.

bigaudiofanat · 09-03-2009, 08:46 AM

^^ HAHA nice rreign ya we sort of are the big 3.

rreign · 09-03-2009, 08:48 AM

Hell, I need some more installs around here. People are broke!! I think this dumbass pres of ours should give everyone an "Upgrade Your Car Audio" stimulus check, lol.

Shunya · 09-03-2009, 09:10 AM

Bigaudiofanat is the best person to help with these things :P

bigaudiofanat · 09-03-2009, 11:49 AM

Quote:

Originally Posted by Shunya

Bigaudiofanat is the best person to help with these things :P

AWW thanks Angie

J3adSeed · 09-03-2009, 12:28 PM

Very interested in your setup, was thinking about a 900/5 as well and biamping my fronts (jl zr650's). I completely think you're right about passive's reducing power and damping factor by adding inductance. I don't know about just running the mid's with no low pass at all on them though, it seems the higher frequencies going to the midbass driver would negatively impact sound quality and driver performance? no?

Quote:

Originally Posted by 2fast4thelaw

I dont filter anything through the head except for the rear speakers that run off the deck. They are at 160Hz @24/db which is as high as it will go.

I am running all active x-over through the amp except for the tweets. JL Amp wont filter that high so the x-over is turned off on those 2 channels and I run the passive focal x-overs for just the tweets.

The mids are x-ed at 60Hz@24/db from the amp and thats it, they roll the highs off naturally on thier own.

The Sub is x-ed at 60Hz@12/db from the amp.

Passive x-overs eat a lot of power by introducing too much inductance. You get much, much better damping factor by using active x-overs. Its most noticible in the bass region.

For Gray Bullet, the 900/5 would be a bit overkill. The 600/4 would be perfect power outputwise but you loose the option to bi-amp your fronts unless you get another amp.

I originally was going to go with the JL C5's and the 600/4 HD but the C5's didnt suit my tastes and the TW5 would have needed a little more power.

bigaudiofanat · 09-03-2009, 12:49 PM

^ Yes I agree not having a filter on them could even damage them as well. The bi amping you do have to keep in mind that you can have more distortion by doing so. Just have to watch your gains and set the properly. You should go completely active and not have different kinds of filters on your speakers. This way there is no difference in cleaning of the signal. From electronic to circuit.

Also for people that are getting a head ache from reading this stuff just ignore it.

2fast4thelaw · 09-08-2009, 01:29 PM

I have put this to test many times and it doesnt create any audible distortion. The midrange driver cannot physically reproduce frequencies above 6000Hz (in most cases) so it will naturally roll off anything above that at 6db/oct. In a 2 way setup this is fine and it actually can work to your benefit if your tweeter is further than 12" away.

It certainly wont hurt anything to try it and you can always bridge the channels with the passives vs bi-amp and using the actives on the amp and see what sounds best to you. Thats what I did and bi-amping and omitting the passives was a big improvement.

Bi-Amping gives you much more flexibility, I can fine tune the tweeter levels very quickly and easily by adjusting the gains on the amp.

The 900/5 is one sweet amp! If you dont mind spending a grand on amplification its one of the best choices out there (IMHO). Having one really good amp simplifys things dramatically. My experience has been the more simple the system, the better.

09-03-2009, 08:46 AM	#19 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	^^ HAHA nice rreign ya we sort of are the big 3. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

09-03-2009, 12:49 PM	#24 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	^ Yes I agree not having a filter on them could even damage them as well. The bi amping you do have to keep in mind that you can have more distortion by doing so. Just have to watch your gains and set the properly. You should go completely active and not have different kinds of filters on your speakers. This way there is no difference in cleaning of the signal. From electronic to circuit. Also for people that are getting a head ache from reading this stuff just ignore it. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/ Last edited by bigaudiofanat; 09-03-2009 at 12:55 PM.

09-08-2009, 01:29 PM	#25 (permalink)
2fast4thelaw Enthusiast Member Join Date: Feb 2009 Location: Denver Co Age: 50 Posts: 403 Drives: 09 370Z Sport/MT6 Rep Power: 16	I have put this to test many times and it doesnt create any audible distortion. The midrange driver cannot physically reproduce frequencies above 6000Hz (in most cases) so it will naturally roll off anything above that at 6db/oct. In a 2 way setup this is fine and it actually can work to your benefit if your tweeter is further than 12" away. It certainly wont hurt anything to try it and you can always bridge the channels with the passives vs bi-amp and using the actives on the amp and see what sounds best to you. Thats what I did and bi-amping and omitting the passives was a big improvement. Bi-Amping gives you much more flexibility, I can fine tune the tweeter levels very quickly and easily by adjusting the gains on the amp. The 900/5 is one sweet amp! If you dont mind spending a grand on amplification its one of the best choices out there (IMHO). Having one really good amp simplifys things dramatically. My experience has been the more simple the system, the better. __________________ To the optimist, the glass is half full. To the pessimist, the glass is half empty. To the engineer, the glass is twice as big as it needs to be.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370Z Speaker Setup	Ricochet48	Audio & Video	19	01-09-2013 09:23 PM
Would this be a good/logical setup?	Dave384	Wheels & Tires	7	04-30-2009 11:14 AM
What sets one brake setup apart from another?	JoeyD	Brakes & Suspension	17	04-20-2009 01:39 PM
This is the setup.....	BoostedMKIV	Wheels & Tires	11	03-09-2009 10:48 PM
how much power will this setup make?	mattkim85	Nissan 370Z General Discussions	5	02-28-2009 06:58 PM

09-03-2009, 09:10 AM	#21 (permalink)
Shunya A True Z Fanatic Join Date: May 2009 Location: Vancouver Posts: 3,069 Drives: You Crazy! Rep Power: 22	Bigaudiofanat is the best person to help with these things :P