Bose w/Nav options

bullitt5897 · 09-01-2009, 08:52 PM

I too want to upgrade my sound system (I have nav system) What other options do we have, to get around the bose sound processor. I want the lil lady to talk to me while im driving. I have amps, speakers, and subs already from a previous build I did and I am thinking of just bringing them over to the Z.

bullitt5897 · 09-01-2009, 08:57 PM

Quote:

Originally Posted by bigaudiofanat

Alright now I can help you out a bit. Head unit I would look at a kenwood 6140 or if you are trying to keep your nav in tack get something like a alpine 9886 single din head unit. This will help you out very much as the bose system will be totally bypassed and you can start fresh.

How would you bypass the bose system I thought it was integrated in with the navigation? Also there is no where for a single din to go in the center dash area below the nav screen its all one seamless piece.

bigaudiofanat · 09-01-2009, 09:16 PM

As I said in the other page. YOU CAN NOT INTEGRATE THE NAV INTO THE NEW AFTERMARKET SETUP. It will sort of be a paper weight after the new one is installed. Metra makes the dash kit that should fit in the nav one. Worse comes to worse you can buy the base model dash part and but the metra kit and have it fit in there. You can pretty much use the stuff you have now but you will have to put a new head unit in. Or you can use a Jl clean sweep AND a MTX Re-Q for the sub channel and than they would remove what the bose has done and than feed the single to the new amps.

tommyguns · 09-01-2009, 09:24 PM

How about a Rockford Fosgate 3Sixty.2 or a JL audio Clean sweep. By using eiter one of those he can use the stock head unit and still upgrade the speakers and will also be able to add amps. This is te way I went in my FX.

Infiniti FX Owners Forum (The Org) • View topic - Pics of system install in TommyGuns FX
Check it out. I think you will like it!

tommyguns · 09-01-2009, 09:25 PM

I almost forgot there is some GOOD reading there, check it out.

bigaudiofanat · 09-01-2009, 09:28 PM

LOL beat you to the JL clean sweep and all. The only problem is that when you tune the JL or any of them and the bose changes something the tuning COULD be thrown off. But I am not sure though. Yes you can use the JL clean sweep and all.

tommyguns · 09-01-2009, 09:33 PM

Quote:

Originally Posted by bigaudiofanat

LOL beat you to the JL clean sweep and all. The only problem is that when you tune the JL or any of them and the bose changes something the tuning COULD be thrown off. But I am not sure though. Yes you can use the JL clean sweep and all.

WOW, I thought at least you would have a comment about the system in I'm FX?

bigaudiofanat · 09-01-2009, 10:08 PM

Sorry did not look at it there was no pics that I was. I will look again. But ya the JL thing can be done but I am trying to make it as easy as possible for people to do. Nothing against the JL thing I have used it before. Just when no one rely knows the diagram of the bose yet it gets complex. I made up a diagram but have not tested it yet.

Just looked at your build again. You have to be a member to see the pics and all.

bullitt5897 · 09-01-2009, 11:14 PM

could you just use the RE-Q5 after the bose signal processor and it do the same thing as the JL and RE-Q?

bigaudiofanat · 09-02-2009, 06:53 AM

Yes but I believe that is a bit more money than the other 2. Yes you can do that.

Daishi · 10-29-2009, 08:11 AM

I have a Bose system with nav.. so i could just hook up a jl clean sweep and that would keep all my stock controls in tact? how would i go about hooking the clean sweep up..

bigaudiofanat · 10-29-2009, 08:28 AM

Basiacally you find all the wires that come out of the bose amp or if you are feeling crazy the ones that go into the bose amp. Also the ones for the sub as well. You cut them and run each channel which have 2 wires too the jl clean sweep. Than you run power to the cleansweap or re-q. Than run your rca wires from there to the new amps. Than from there you run NEW wires to all your new speakers. Than you insert the tuning cd and it tunes the system getting rid of what the bose system does to it. That is about it. It will take the normal person about 2 days to do all this. The first time I did one took me 2 days plus another day for dynamat but that was in a accord.

bigaudiofanat · 10-29-2009, 08:31 AM

Or you can just take all the bose stuff out and start with a new head unit and all. Either way will cost about the same the jl thing might be a few 100 bucks more.

370Zsteve · 10-29-2009, 08:35 AM

Hey Matt

Do you know of a link to the specs of the Bose? I'd like to read up on the circuitry that clips the signal!

bigaudiofanat · 10-29-2009, 08:45 AM

Well you need to look around, I found out about ti by listening to the systems in the cars and at the bose store. I leave there laughing every time. The link below is when they started using the tech, back in 96 or 97 that is when bose took a dive in quality.

Here you go for a start

Bass clipping circuit - US Patent 5509080 Claims

09-01-2009, 08:52 PM	#16 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	I too want to upgrade my sound system (I have nav system) What other options do we have, to get around the bose sound processor. I want the lil lady to talk to me while im driving. I have amps, speakers, and subs already from a previous build I did and I am thinking of just bringing them over to the Z. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

09-01-2009, 09:16 PM	#18 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	As I said in the other page. YOU CAN NOT INTEGRATE THE NAV INTO THE NEW AFTERMARKET SETUP. It will sort of be a paper weight after the new one is installed. Metra makes the dash kit that should fit in the nav one. Worse comes to worse you can buy the base model dash part and but the metra kit and have it fit in there. You can pretty much use the stuff you have now but you will have to put a new head unit in. Or you can use a Jl clean sweep AND a MTX Re-Q for the sub channel and than they would remove what the bose has done and than feed the single to the new amps. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/ Last edited by bigaudiofanat; 10-29-2009 at 08:38 AM.

09-01-2009, 09:28 PM	#21 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	LOL beat you to the JL clean sweep and all. The only problem is that when you tune the JL or any of them and the bose changes something the tuning COULD be thrown off. But I am not sure though. Yes you can use the JL clean sweep and all. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

09-01-2009, 10:08 PM	#23 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Sorry did not look at it there was no pics that I was. I will look again. But ya the JL thing can be done but I am trying to make it as easy as possible for people to do. Nothing against the JL thing I have used it before. Just when no one rely knows the diagram of the bose yet it gets complex. I made up a diagram but have not tested it yet. Just looked at your build again. You have to be a member to see the pics and all. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

09-01-2009, 11:14 PM	#24 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	could you just use the RE-Q5 after the bose signal processor and it do the same thing as the JL and RE-Q? __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

09-01-2009, 09:24 PM	#19 (permalink)
tommyguns Track Member Join Date: May 2009 Location: New York Age: 64 Posts: 914 Drives: 370Z/Sport/Black/MT Rep Power: 17	How about a Rockford Fosgate 3Sixty.2 or a JL audio Clean sweep. By using eiter one of those he can use the stock head unit and still upgrade the speakers and will also be able to add amps. This is te way I went in my FX. Infiniti FX Owners Forum (The Org) • View topic - Pics of system install in TommyGuns FX Check it out. I think you will like it!

09-01-2009, 09:25 PM	#20 (permalink)
tommyguns Track Member Join Date: May 2009 Location: New York Age: 64 Posts: 914 Drives: 370Z/Sport/Black/MT Rep Power: 17	I almost forgot there is some GOOD reading there, check it out.

09-02-2009, 06:53 AM	#25 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Yes but I believe that is a bit more money than the other 2. Yes you can do that. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

10-29-2009, 08:11 AM	#26 (permalink)
Daishi Track Member Join Date: Jul 2009 Location: NJ Posts: 683 Drives: 09 370z 6Speed Rep Power: 17	I have a Bose system with nav.. so i could just hook up a jl clean sweep and that would keep all my stock controls in tact? how would i go about hooking the clean sweep up.. Last edited by Daishi; 10-29-2009 at 08:14 AM.

10-29-2009, 08:28 AM	#27 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Basiacally you find all the wires that come out of the bose amp or if you are feeling crazy the ones that go into the bose amp. Also the ones for the sub as well. You cut them and run each channel which have 2 wires too the jl clean sweep. Than you run power to the cleansweap or re-q. Than run your rca wires from there to the new amps. Than from there you run NEW wires to all your new speakers. Than you insert the tuning cd and it tunes the system getting rid of what the bose system does to it. That is about it. It will take the normal person about 2 days to do all this. The first time I did one took me 2 days plus another day for dynamat but that was in a accord. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

10-29-2009, 08:31 AM	#28 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Or you can just take all the bose stuff out and start with a new head unit and all. Either way will cost about the same the jl thing might be a few 100 bucks more. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

10-29-2009, 08:35 AM	#29 (permalink)
370Zsteve A True Z Fanatic Join Date: Sep 2009 Location: Gold Coast CT Posts: 10,599 Drives: 2019 Corvette G.S. Rep Power: 43	Hey Matt Do you know of a link to the specs of the Bose? I'd like to read up on the circuitry that clips the signal! __________________ SOLD MY Z MARCH 2018 - another Core OG moves on - new ride 2019 Z Corvette Grand Sport - no mods necessary but already have eyes on HFC and intakes LOL IT NEVER ENDS.

10-29-2009, 08:45 AM	#30 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Well you need to look around, I found out about ti by listening to the systems in the cars and at the bose store. I leave there laughing every time. The link below is when they started using the tech, back in 96 or 97 that is when bose took a dive in quality. Here you go for a start Bass clipping circuit - US Patent 5509080 Claims __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tire options	tonmed123	Wheels & Tires	0	07-25-2009 07:50 PM
Wow...the options	edeeZee	Other Vehicles	5	07-25-2009 02:32 PM
Options: Happy w/them?	BurntGauge	Nissan 370Z General Discussions	16	04-21-2009 03:42 PM
Brake Options Everywhere	370Ztune	Brakes & Suspension	9	02-05-2009 11:24 AM
cd player options?	dharr67	Audio & Video	0	01-11-2009 05:14 PM