Need help on Touring w/sports package with Bose no navi
 

Hey guys so can anyone help me out on this, do I have it wired correctly with the harness and RCAs to the head unit???
Oh and do I need to have that wider piece hooked up too??
I have it hooked up like this to my Z but got it powered on but no sound coming out. Sorry for the messy wire and hope any of you guys have been installing HUs know this. Thanks!

http://img.tapatalk.com/d/14/02/03/py3ezyta.jpg
http://img.tapatalk.com/d/14/02/03/yzyty7ep.jpghttp://img.tapatalk.com/d/14/02/03/a2eve6av.jpg
http://img.tapatalk.com/d/14/02/03/y9a9ezyt.jpg

I want to install this myself before I give up and take it to a shop to do it.

Here's the Bose premium wiring harness and the back of the HU. Which colors plug into which??
http://img.tapatalk.com/d/14/02/03/atu7a4u5.jpg
http://img.tapatalk.com/d/14/02/03/6ygupa6u.jpg
Sent from my iPhone using Tapatalk

Baf!

You have to hook up the blue with white stripe also.

So the blue with white stripe will go to the antenna? There's this really long blue wire that labels RELAY.


Sent from my iPhone using Tapatalk

No, if I understand correctly the blue with the white stripe will go to the factory bose amp to turn it on. The reason you do not have sound is because the amp is not powering on with the HU currently.

Also at the very least put some electrical tape over the connections before this turns into a "what fuse did I blow" thread. haha trust me, i've done that to myself.

So I have to tap into the Bose amp wire?


Sent from my iPhone using Tapatalk

If you bought the correct harness for your HU you should have a bose amp signal wire there.

Metra 70-7553 Receiver Wire Harness For select 2007-up Nissan and Subaru vehicles — adapts new car stereo to factory plug at Crutchfield.com

Your adaptor should be the same with the following pinouts.

Metra 70-7553 Receiver Wire Harness For select 2007-up Nissan and Subaru vehicles — adapts new car stereo to factory plug at Crutchfield.com

Yep I have that one. So all I need to do is to tap into the Bose amp wire from the harness?


Sent from my iPhone using Tapatalk

And by looking at the pictures you have the right harness. Essentially all you have to do is attached the blue white wire coming from the harness you bought to the blue white wire coming out of the HU

I can see both these wires in your pictures.

Hmm ok cool. I'm gonna try that this weekend and see. Will update this thread too. Thanks!


Sent from my iPhone using Tapatalk

Oh and what about the blue wire from the antenna adapter? That wires to something or leave it?


Sent from my iPhone using Tapatalk

Just leave that alone. All your concerned about is the remote amp turn on wire.

Goodluck!

Mitch

Ok sweet. So I've been wiring that to the harness blue wire LOLOLOL.

Thanks! Will try the install this weekend and let you know! :)


Sent from my iPhone using Tapatalk

Almost forgot. Do I have the RCAs hooked up right from the picture?


Sent from my iPhone using Tapatalk