Got Kenwood DNX6140 Installed

dcrew1x · 08-22-2009, 09:14 PM

First off, big thanks to AK370 for his write up and impressions/review. Thanks to Matt (bigaudiofanat) for some helpful information.

I wanted to have Matt fly down but a good friend of mine referred me to someone local he trusted. Thanks anyway Matt for for being willing to fly down.

BTW I don't have pictures of the PAC-switch that was also installed. I went ahead and updated this thread:
PAC Steering Wheel Control Poll

Well Here are the pics:

Before

Head Unit

Bluetooth Mic on Driver's Side A-Pillar

Works flawlessly and like AK370 mentioned: crystal clear reception. My buddy didn't even know I was using the mic over the phone.

IPOD adapter cable coming through Center armrest console

Some ghetto dremmeling here: I'll probably have this slightly re-done with a rubber grommet to keep the IPOD cable from potentially falling back through the hole.

Rear view camera above fog light (Got the idea from TZGQ2M Pioneer AVIC-Z110BT and ND-BC2 installed)

One note on my camera: I'm thinking about getting one that doesn't have the lines "visual aids to guage distance". Unfortunately in all my excitement, I forgot to take AK370's advice and check for best possible placement for this specific camera. So for now the lines are just in the way rather than being useful:

Besides that, everything works perfectly.

Once again for anyone else interested in a similar setup with the same camera: look at where you want your camera aligned before you choose to install it. Personally I like where the camera is placed and ironically one of the camera's "helpful" features is something I can do without.

I also went ahead and updated my startup splash screen to see how it works.

I used DIGItonium's custom pic for now (thanks Dig for the idea!) and It needs a little adjusting.
Kenwood and Elemental Designs Install...

The image is slightly smaller than the screen so it leaves gaps on either side. For my head unit the pictures need to be 480 x 240 and I'm assuming DIGItonium's are different due to larger screen on head unit?

DIG your setup is awesome. My camera sucks but your image I used definitely looks better in person than the pic I uploaded

Well in any case, it works. Now I just need to make my own

Zster · 08-23-2009, 09:36 PM

do u have a step by step install instruction on the PAC stering control? thanks.

bigaudiofanat · 08-23-2009, 09:39 PM

Looks good man, turned out nice I wish I could of came but it is cool that it turned out nice. On a side note ya that is not a good place for the camera for those lines to help with distance.

tonmed123 · 08-24-2009, 12:44 AM

Did you take any pis of the camera mounting and drillng of the peep hole?

zulus370Z · 08-24-2009, 07:53 PM

Man, I just realized that I didnt intall the trim piece that goes around the stereo! lol.
After I was done putting everything back together, I went to install the trim piece and it didnt fit, so I figured that it was not needed/used in our cars, but I guess I was supposed to install it before I secured it to the bracket that screws on to the car, huh"?

bigaudiofanat · 08-24-2009, 07:59 PM

The trim piece will not fit around the stero do not worry about it. Even if you were to try to install it before the dash being put back together it would not fit. That is made for cars like the honda civic and all that the trim dose not go around the head unit.

thebigd08 · 08-29-2009, 08:48 PM

Nice work, looks good. I have a Pioneer AVH-P4100DVD coming in soon, and I haven't taken apart the dash yet. For the wiring harness, did you just buy a Scosche NN04B? I went on their website, and this is the only harness they recommend. Did you also need an adaptor for the antenna? I believe the model is Scosche NAA2B, or is the OEM adapter already the correct one?

Here's the link for the adapter
Scosche Industries

bigaudiofanat · 08-29-2009, 08:54 PM

Yes you need that and your antenna adapter as well.

08-22-2009, 09:14 PM	#1 (permalink)
dcrew1x Track Member Join Date: Jun 2009 Location: SoCal Posts: 821 Drives: Graphite Bullet Rep Power: 369	Got Kenwood DNX6140 Installed First off, big thanks to AK370 for his write up and impressions/review. Thanks to Matt (bigaudiofanat) for some helpful information. I wanted to have Matt fly down but a good friend of mine referred me to someone local he trusted. Thanks anyway Matt for for being willing to fly down. BTW I don't have pictures of the PAC-switch that was also installed. I went ahead and updated this thread: PAC Steering Wheel Control Poll Well Here are the pics: Before Head Unit Bluetooth Mic on Driver's Side A-Pillar Works flawlessly and like AK370 mentioned: crystal clear reception. My buddy didn't even know I was using the mic over the phone. IPOD adapter cable coming through Center armrest console Some ghetto dremmeling here: I'll probably have this slightly re-done with a rubber grommet to keep the IPOD cable from potentially falling back through the hole. Rear view camera above fog light (Got the idea from TZGQ2M Pioneer AVIC-Z110BT and ND-BC2 installed) One note on my camera: I'm thinking about getting one that doesn't have the lines "visual aids to guage distance". Unfortunately in all my excitement, I forgot to take AK370's advice and check for best possible placement for this specific camera. So for now the lines are just in the way rather than being useful: Besides that, everything works perfectly. Once again for anyone else interested in a similar setup with the same camera: look at where you want your camera aligned before you choose to install it. Personally I like where the camera is placed and ironically one of the camera's "helpful" features is something I can do without. I also went ahead and updated my startup splash screen to see how it works. I used DIGItonium's custom pic for now (thanks Dig for the idea!) and It needs a little adjusting. Kenwood and Elemental Designs Install... The image is slightly smaller than the screen so it leaves gaps on either side. For my head unit the pictures need to be 480 x 240 and I'm assuming DIGItonium's are different due to larger screen on head unit? DIG your setup is awesome. My camera sucks but your image I used definitely looks better in person than the pic I uploaded Well in any case, it works. Now I just need to make my own Last edited by dcrew1x; 08-22-2009 at 09:18 PM.

08-23-2009, 09:39 PM	#3 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Looks good man, turned out nice I wish I could of came but it is cool that it turned out nice. On a side note ya that is not a good place for the camera for those lines to help with distance. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/ Last edited by bigaudiofanat; 08-23-2009 at 09:45 PM.

08-24-2009, 12:44 AM	#4 (permalink)
tonmed123 Base Member Join Date: Apr 2009 Location: Houston,Texas Posts: 223 Drives: 09 370Z Red M6 Rep Power: 267	Did you take any pis of the camera mounting and drillng of the peep hole? __________________ 09,Solid Red,MT,Tour/Sport,Nav,3M Clear bra,35% Ceramic tint,Stillen sways,F.I. (HFC's,18 RES's,CBE), SpawnCFB pillars; Injen BLK CAI

08-24-2009, 07:59 PM	#6 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	The trim piece will not fit around the stero do not worry about it. Even if you were to try to install it before the dash being put back together it would not fit. That is made for cars like the honda civic and all that the trim dose not go around the head unit. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

08-29-2009, 08:48 PM	#7 (permalink)
thebigd08 Base Member Join Date: Aug 2009 Location: chicago, IL Posts: 1 Drives: 09 Nissan 370z - M6 Rep Power: 16	Wiring Harness Nice work, looks good. I have a Pioneer AVH-P4100DVD coming in soon, and I haven't taken apart the dash yet. For the wiring harness, did you just buy a Scosche NN04B? I went on their website, and this is the only harness they recommend. Did you also need an adaptor for the antenna? I believe the model is Scosche NAA2B, or is the OEM adapter already the correct one? Here's the link for the adapter Scosche Industries

08-23-2009, 09:36 PM	#2 (permalink)
Zster Base Member Join Date: Aug 2009 Location: Orange County, CA Posts: 3 Drives: 09-370Z-PW-M6 Rep Power: 16	do u have a step by step install instruction on the PAC stering control? thanks.

08-24-2009, 07:53 PM	#5 (permalink)
zulus370Z Base Member Join Date: Jul 2009 Location: Miami Posts: 97 Drives: Black 370Z 6M Rep Power: 16	Man, I just realized that I didnt intall the trim piece that goes around the stereo! lol. After I was done putting everything back together, I went to install the trim piece and it didnt fit, so I figured that it was not needed/used in our cars, but I guess I was supposed to install it before I secured it to the bracket that screws on to the car, huh"?

08-29-2009, 08:54 PM	#8 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 853	Yes you need that and your antenna adapter as well. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Kenwood DNX6140 installed in my 370Z with Sirius and back up Cam (AK370Z)	AK370Z	Audio & Video	308	10-25-2020 08:17 PM
videos kenwood dnx6140 installed with pioneer rear view cam	dainedazz	Audio & Video	14	08-16-2009 05:40 PM
door chime for kenwood dnx6140	wowdusk	DIY Section (Do-It-Yourself)	1	08-03-2009 02:04 AM
Kenwood dnx 5120	355890	Audio & Video	18	04-30-2009 02:00 PM
Kenwood DDX 512 w/nav	355890	Audio & Video	3	03-23-2009 04:36 AM