For those that own the Kenwood dbl din units, what is q factor, do you use loudness mode on or off, what freq do you set the bass and treble
|
|
LinkBack | Thread Tools | Display Modes |
08-18-2009, 11:11 AM | #1 (permalink) |
Track Member
Join Date: May 2009
Location: Florida
Posts: 823
Drives: 2013 Scion FRS
Rep Power: 17 |
Kenwood DDX/DNX Equalizer help
For those that own the Kenwood dbl din units, what is q factor, do you use loudness mode on or off, what freq do you set the bass and treble to,etc. So many variances for audio tuning on the kenwood units, what have you guys found that works. Thanks
|
12-28-2014, 11:18 PM | #2 (permalink) |
Base Member
Join Date: Nov 2013
Location: S. California, Fontana
Posts: 231
Drives: 14 370Z BaseCoupe PW
Rep Power: 11 |
Let me bump this thread with a little bit of a different direction.
For those of you with equalizers built into your aftermarket HU (most of you)? Can you post the different setting you have for the custom equalizer? I have a pioneer HU and it has 5 or so preset setting for different types of sound. There are also 2 custom setting, one I use for CD, MP3 and Streaming, the other I use for the stereo. Can you all most images of your equal settings? I am looking to tune mine in a little better. I know it comes down to musical preferences but I would like to get an idea of what people use.
__________________
2014 Nissan 370Z base coupe PW-m 2004 Mazda RX-8 grant touring VR-m (sold) 1992 Nissan 240SX/SE MG-m (sold) |
12-29-2014, 02:38 PM | #3 (permalink) |
A True Z Fanatic
Join Date: Aug 2011
Location: Pine grove, Pa
Posts: 2,136
Drives: 2 feet, 3 pedals
Rep Power: 6775 |
way too many variables here.... different head units, speakers, locations, interior finishes (cloth or leather) just too many to mention, really. Adjust your eq to suit your tastes in your individual setup. period. what sounds great in one will not sound the same in another.
Also, Always remember it is better to cut with your eq than to add. adding increases power to that certain frequency in large amounts, and can/will add distortion as well. Ps: you really dug this one up from the dead !! Lol
__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals |
12-29-2014, 02:45 PM | #4 (permalink) |
A True Z Fanatic
Join Date: Sep 2013
Location: Lockhart, TX
Posts: 1,082
Drives: 13 Nissan 370Z A7
Rep Power: 18 |
Whats funny is I had to upgrade my alpine deck to a Kenwood on Saturday for my 3-1/2 speaker install.
__________________
Takeda TR3009P Short Ram Intakes, Custom Dual Exhaust, X-Piped with 18" Resonators & TopSpeed Axle Backs. EVO-R Led Third Foglight, |
12-30-2014, 09:30 PM | #5 (permalink) | |
Base Member
Join Date: Jan 2014
Location: Los Angeles
Posts: 216
Drives: N/A
Rep Power: 11 |
Quote:
Let's say you boost a particular frequency by 5 and that the Q factor is larger, like 1.5. Imagine that the EQ curve will look like a triangle, with the peak of the triangle as the frequency you boosted by 5. The base of the triangle will be wide because your Q factor is larger. The width of the base of the triangle represents the frequency range; the wider the base of the triangle, the wider range of affected frequencies. Now let's say you boost that same frequency by +5 again, but this time the Q factor is smaller, like .5. The peak of this triangle will be the same, but the base will be much narrower because your Q factor is smaller. In both cases, the surrounding frequencies (both higher and lower) are changed, but the frequencies that are changed in the second example are closer to the original frequency that was boosted. I realize this is really abstract, and I hope this all makes sense and that I am correct. If anyone wants to chime in, I welcome that. |
|
12-31-2014, 03:29 AM | #6 (permalink) |
Base Member
Join Date: Jun 2013
Location: Madison, WI
Posts: 63
Drives: '88 Porsche 928 S4
Rep Power: 12 |
I've heard people say that if you have a good audio setup, you shouldn't need to run an EQ as the speakers and setup should sound good enough to do everything necessary "on their own"?
What are your takes on this? In my personal experience, be it car stereo or home audio.. I usually find a good setup equalizer can make a positive difference, at least to my ears. When I was a kid, my father ran the home stereo through not 1 but 2 graphic equalizers and would yell at me if I got close to the knobs with my fingers! |
12-31-2014, 06:47 AM | #7 (permalink) |
A True Z Fanatic
Join Date: Sep 2013
Location: Lockhart, TX
Posts: 1,082
Drives: 13 Nissan 370Z A7
Rep Power: 18 |
It's the tweak to personal tastes. On a 5 band EQ I have my settings V style. I like a lot of treble and bass but not much mid range. Too much mid range sounds boxy to me
__________________
Takeda TR3009P Short Ram Intakes, Custom Dual Exhaust, X-Piped with 18" Resonators & TopSpeed Axle Backs. EVO-R Led Third Foglight, |
12-31-2014, 12:47 PM | #8 (permalink) | |
A True Z Fanatic
Join Date: Aug 2011
Location: Pine grove, Pa
Posts: 2,136
Drives: 2 feet, 3 pedals
Rep Power: 6775 |
Quote:
Good explanation for anyone else reading, anyway!
__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals |
|
12-31-2014, 12:57 PM | #10 (permalink) | |
A True Z Fanatic
Join Date: Aug 2011
Location: Pine grove, Pa
Posts: 2,136
Drives: 2 feet, 3 pedals
Rep Power: 6775 |
Quote:
One example is... Most hatchback cars seem to accentuate at or around 80hz tones. Simple Bass and treble controls work mainly on 100hz, and 1000hz, respectively, with a pretty wide "Q". In other words, if you turn down the bass, you are in effect turning it down at 63, 80, 100, and 125hz at the same time, albeit in different levels. Your eq will let you decrease precisely at 80hz, without affecting 63, 100, ect, ect. A great sound system can sound fantastic without an eq, but the addition of one makes things muy beuno.
__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals |
|
12-31-2014, 01:55 PM | #11 (permalink) | |
A True Z Fanatic
Join Date: Sep 2013
Location: Lockhart, TX
Posts: 1,082
Drives: 13 Nissan 370Z A7
Rep Power: 18 |
Quote:
__________________
Takeda TR3009P Short Ram Intakes, Custom Dual Exhaust, X-Piped with 18" Resonators & TopSpeed Axle Backs. EVO-R Led Third Foglight, |
|
12-31-2014, 07:17 PM | #12 (permalink) | |
Base Member
Join Date: Jun 2013
Location: Madison, WI
Posts: 63
Drives: '88 Porsche 928 S4
Rep Power: 12 |
Quote:
|
|
01-01-2015, 05:07 AM | #13 (permalink) |
A True Z Fanatic
Join Date: Aug 2011
Location: Pine grove, Pa
Posts: 2,136
Drives: 2 feet, 3 pedals
Rep Power: 6775 |
I try to be helpful. A good piece of advice I like to give others is.... check out a local car stereo SQ competition. Ask your local shop if they have one, or know of any nearby.
Stop by and check some of the cars out, and talk to some of the owners. There are so many that I have met over the last 30 years that WANT to talk about these things, offer tips, and tricks, and would let anyone sit in the car for a demo.
__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals |
01-01-2015, 06:57 AM | #14 (permalink) |
Premium Member
Join Date: Nov 2010
Location: South Arkansas
Posts: 8,435
Drives: 2014 Challenger
Rep Power: 324198 |
Nice explanation. To put all that more succinctly, Q is the inverse of bandwidth. High Q = narrow bandwidth.
__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma |
01-02-2015, 04:43 PM | #15 (permalink) |
Car Audio Installer
|
I know in my sound system I use a EQ and that's with aiming my speakers (customer fiberglass) as well as time alignment. Focals by nature are harsh and need some tweaking through an EQ to quiet them down.
OP, as stated you have to many variables to just have someone else show you their EQ settings and copy them. It comes down to taste and what you like it to sound like. Play around with them in a quiet parking lot with music you know by heart. Try not to tune using the radio as it tends to be muffled with the compression.
__________________
Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/ |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Installing a Kenwood | YellowStrider | Audio & Video | 5 | 08-14-2009 04:44 PM |
Kenwood DNX 9140 | ichee84 | Audio & Video | 10 | 07-29-2009 01:44 PM |
Kenwood dnx 5120 | 355890 | Audio & Video | 18 | 04-30-2009 02:00 PM |
Kenwood DNX7140 | roptics | Audio & Video | 3 | 04-10-2009 05:42 PM |
Kenwood DDX 512 w/nav | 355890 | Audio & Video | 3 | 03-23-2009 04:36 AM |